Commercialisation of the patented GRolls comminution technology in conjunction with CBSM Mining, UniSA and Innovyz. Benefits to minerals processing plants include lower energy consumption, wet and dry feed material, no media required and higher throughput.

Development of the Sentinel high-throughput pathogen screening instruments whilst responsible for Engineering, Manufacturing, Quality, Regulatory and IT. Design of the RT-LAMP incubation module with integrated fluorometry and embedded electronics.

Professional consulting services directly support R&D, product commercialization, process engineering, contract compliance and quality management systems (ISO 9001, ISO 13485).> R&D product development from concept to deployment> Business review & assessment focused on R&D, product development and project management> Operations & Project management> Product development lifecycles & methodology> Technical problem solving & root cause analysis> Quality systems> Systems engineering & project engineering> Process engineering, continuous improvement> Lean process engineering, 5S, WHSE and functional safetywww.incusinnovation.com

Full technical responsibility for the electrical design, construction, commissioning and in-field support of FBR's Hadrian X robotic brick laying machines. Leadership of electrical engineers and electrical trades to succesfully deliver the world first brick-laying robot.Specific responsibilities and accountability:> Electrical design, construction, commissioning and electrical safety compliance aligned to AS/NZS 3000, AS/NZS 3012 and AS/NZS 60204> 3-phase and single electrical design including generation, distribution and protection.> Subject matter expert for laser tracking equipment in an outdoor environme> Electronic design including servo motors, drives, PLC hardware, sensors, actuators, linear encoders, networking, vision and CCTV> FBR in-house electrical install licence through EnergySafety (WA)> FBR LOTO isolation safety procedures, training and compliance (Nominated Officer)> AS 4024 functional safety including risk assessment, design, verification and validation> Root cause analysis and resolution of latent electrical deficiencies

A thoroughly stimulating and rewarding role at SA Power networks leading the asset assessment team across the state of South Australia. The role provided actionable information into the corporate systems in support of the broader Network Asset Management activities (strategy, operations, asset risk management).Responsibilities and accountability:> Team of 35 Asset Assessment officers across South Australia> Inspection programs for all SA Power Networks assets - sub-stations, poles, wires, transformers, switchgear, and protection.> Thermographic inspections> Special event inspections> Authoring of Line Inspection Manual> Contractor management for aerial and ground based inspections> Introduction of new technology - drones, below ground corrosion detection, IoT remote monitoring> Member of Disconnect Order Group> Liaison with the Office of the Technical Regulator (OTR) regarding defective electrical installations> Risk management and clarity of ownership for Metered Mains> Customer support (consumers) including low spans, compliance, safety and issue resolution> Asset condition monitoring> Valuing and Visibility for optimal return on investment (opex, capex, repex) based on risk> Contribution to underwriters submission, SAMP, 2020-2025 RESET and asset management plans

Systems integrator with specialisation in M2M communications (satellite, cellular, UHF) delivering turnkey solutions in the fields of vehicle management systems (IVMS), lone worker systems, asset management and IoT applications.

Reflex specializes in the design, manufacture, supply and servicing of precision downhole survey instrumentation, analytics and software (SaaS) solutions across the global minerals exploration industry. From 2014, Reflex has transitioned from being predominantly a tools supplier to the drilling companies to a full end-to-end solutions provider focusing on the resource companies. My strategic contribution over this time has introduced Reflex to IoT with emphasis on near real-time data connectivity between remote locations and the REFLEXHUB-IQ.Responsible for R&D, key achievements include:> Development of the Lab-at-Rig through the DET-CRC, commercialization and field deployment> Development of the Ez Gamma survey instrument and release to market> Development of the TN14 Gyrocompass and release to market> Resolution of technical challenges with Ez Gyro and release to market> Development of the Reflex XRF using the Olympus Delta and customized software> Design of Reflex Command rig server for aggregation of field data & remote connectivity> Design of the Drill Monitoring System (rig sensors) deployed with Ausdrill to BHPResponsible for intellectual property as Global IP Manager. Patents, trademarks & portfolio management.Responsible for Manufacturing & Service, key achievements include:> Transformed manufacturing & service into a world-class operation at the new Balcatta facility> Introduced lean manufacturing processes and significantly scaled productivity without headcount increase> Significantly improved delivery times on manufactured product and repairs> Reduced significant quarterly inventory variances to nil in 2015In order to achieve these outcomes, I introduced structured product development methodology, project management processes and management controls (PMO, project cost accounting, change control), AGILE SDLC, product roadmaps and effective qualification of new technology / products through NPI and field testing.www.reflexnow.com

A most rewarding journey in supporting the Technology Industry Association (TIA) in South Australia with the opportunity to meet many great people and companies.As president of the TIA from 2012 to 2014, key highlights include:> Transformation of the EIA/TIA into a new legal entity with a sustainable business model in the absence of continued government funding.> Developing a stronger member-focused association providing focused initiatives directly benefiting members.> Networking events relevant to the industry and emphasizing the capabilities of technology companies within South Australia> Promoting business development opportunities and facilitating several commercially beneficial outcomes to members.> Engaging with the government of South Australia on key matters within the industry and lobbying the interests of members.The TIA is a not-for-profit industry association lead by a volunteer board of directors and volunteer sub-committee members who are individually and collectively passionate about the broader technology industry of South Australia aligned to the TIA vision.www.tia.asn.au

Minetec Communications (acquired by Codan in 2012) provides radio communications, safety and productivity solutions to the global mining sector. Minetec uses modern technology in the Product Development (R&D) and successfully deploys solutions through their Project Engineering & mining services expertise.Transferring from Minelab to Minetec in 2013 to introduce structured methodology and project management into the Minetec operations, a number of new products were transferred to Codan Manufacturing and key mining projects were successfully delivered.> New Product Introduction (NPI) of the ELF (Ethernet over Leaky Feeder) to Codan Manufacturing> Design completion, field testing & NPI of the Safe Detect collision avoidance system> Deployment of ELF communications system, TRAX and SMARTS at Newcrest Togurachi mine in Indonesia> Deployment of ELF communications and TRAX at Barrick Porgera mine in PNG> Installation & commissioning of Arrium remote SCADA telemetry system in rural South Australia> Design & installation of IP CCTV security system with radio communications for Alacer Gold (WA)> Design and delivery of radio communication trailers to Telstra and BHP> EPCM civil construction of the ODG/FMG radio communication towers in the PilbaraBuilding on the product development processes established at Minelab, the Project Engineering methodology was improved including the introduction of earned value project management to provide better tracking, predictability and financial rigour.www.minetec.com.au

Minelab Electronics (acquired by Codan in 2008) is globally well recognized for their gold, treasure, underwater and countermine metal detectors. The performance of the gold detectors is significantly superior to competitor products, particularly in strongly mineralized ground conditions.When joining Minelab, I was quickly tasked with addressing delays & technical issues on the F3 Compact and CTX 3030 product developments. Introducing improvements to the Stage Gate, project management and NPI processes along with focused team development, results were quickly evident. Restructuring the R&D team with a dedicated Technology Advancement Group (TAG) ensured research into the future technologies always remained ahead of current product development - critical for a consumer products business.Key achievements:> Completion of the F3 Compact countermine detector, resolution of issues & market release> Brand new platform for the CTX 3030 treasure detector, resolution of technical issues and successful market introduction of a high volume consumer electronic product globally> Software development & release of XChange 2 with Google Maps tracking> Design and market introduction of the Pro-Find 25 pinpointer> Research into the ZVT gold PI technology leading into the subsequent release of the GPZ 7000> Design of the Pro Swing 45 harnessWith full R&D operations responsibility, I enjoyed creating the frameworks and environment in which everyone could grow and further their career. It is also rewarding to see the product development being turned around to delivering world-class products that continue to be commercially successful today.www.minelab.com

Aim Lab Automation Technologies designs, manufactures and services precision laboratory automation instruments incorporating complex robotics and advanced software interfaces (LIMS). Located on the Sunshine Coast of Queensland, Aim Lab's products are installed in chemistry and pathology labs globally.Responsible for R&D, Manufacturing & Service, the Pathfinder 900 automated specimen tube management system and the Pathfinder 350 automated specimen archiver were key products delivered to the market. Stringent audits of the Quality Management System from Abbott Diagnostics against the ISO 13485 standard were successfully completed for an OEM supply of product.www.aimlab.com

With the Faiveley head office in France, the Melbourne operation (Integrian Pty Ltd prior to acquisition) designs, manufactures and services passenger information systems (PIS), CCTV systems, digital event recorders, safety systems, door control systems for the Australian rail industry.When joining Faiveley, two key projects required design completion and delivery against very challenging timelines:> Completion of the VICERS (Vigilance, Control, Event Recording System) safety system deployed on the Melbourne metro rail following the Waterfall rail accident in NSW in 2003.> Design, manufacture, installation and commissioning of the new PIS / CCTV system for the Bombardier / TransAdelaide railcar refurbishment in South Australia within 6 months of project commencement. The TransAdelaide project involved the design of new VOIP emergency intercoms, IP based CCTV, automated passenger information displays (PIS / PID), automated announcements and new touch screen driver display console. A key technical challenge was the reliable Ethernet communications between rail cars given that the existing couplers could not be modified from the legacy design (analogue). A strong technical team with excellent teamwork under a demanding contractual framework delivered a successfully commissioned system on time for the Minister's ribbon-cutting ceremony. The team and technology were the proud recipients of innovation design awards later that year.www.faiveleytransport.com

Ellex Medical is a global provider of ophthalmic surgical lasers and diagnostic ultrasound medical instruments used in the treatment of eye diseases. Recognized internationally for innovative products, Ellex designs, manufactures, distributes and services instruments under the ISO 13485 quality standard.Responsible for R&D / Engineering / Regulatory compliance, new project management processes and product development methodology was introduced to improve the effectiveness in commercializing new designs. Of particular strength was the risk based approach to product development aligned to the ISO 13485 standard, especially towards achieving FDA / TGA compliance approval.Key achievements:> Design of the the Integre Duo red / green ophthalmic laser using a closed loop control system for precise control of delivered energy. The first commercial units were delivered within 12 months of the project start and with performance superior to other multi-wavelength instruments in the market.> Resolved several latent design issues on the Solitaire surgical laser to become one of the most reliable instruments in the product portfolio.> Traveled to China to successfully investigate and resolve crystal yield failures that halted product of the Solitaire laser.> Managed the technical acquisition of the Eye Cubed ultrasound instrument following acquisition of Eye Cubed in Sacramento, California. This included addressing regulatory compliance matters and software enhancements in accordance with ISO 13485.> Developed the laser cavity for the triple wavelength (red / green / yellow) now used for the Integre Pro laser instrument.www.ellex.com