Syed Mustafa Email & Phone Number

Abudhabi, Uae

Approved Senior Electrical Engineer by ADNOC, for the Project of AiP5 (BAB).Resp[possibilities :1. Field Engineering.2. Tie-In Feeders Reservations & Finalization with ADNOC Operation team and Provide the reservation Tags on the Feeders which in under the AiP5 Project Scope.3. Pre-inspection of reserved feeders with OEM (Original Equipment Manufacturer) for the modification, Defective component replacement & healthiness checks.4. Obtain the Pre-Shutdown, Intermediate Shutdown & Shutdown Schedule from Client, accordingly Plan the OEM mobilization for the rectification or integration works during the shutdown.5. Witness the work carried out by IC (IMPLEMENTATION CONTRACTOR) against the RFI along with PMC and register the punch points & categorize the Punch point type and follow-up for punch close Closeout.6. Share the Road Map & Construction Integrated schedule with higher management highlighting the dates for the requirement of Engineering drawings deliverable & materials prior to one month before construction activities.7. Prepare & Review the Scope of Works related with different locations (Well Heads, Well bays, Mini- Pads, Main- Pads, Remote Degassing Station & Control Degassing Station.8. Supervision the Safety, Quality & Construction activities.

Haldia, West Bengal, India

1. Well versed to formulate, manage, and review mandatory requirements of projects like Permit To Work, TRA/JSA (Task Risk Assessment), Method Statement, Work force (Personnel) Safety, Environmental Safety, Vendor & EPCC Contractor AFC Layouts/ drawings, Specification for HSE Management & TBT (Toolbox Talk) prior to construction work start-up till completion.2. Experienced in delivering End-to-End EPCC, EPCM & PMC Project service including Site Survey, Interface & Field Engineering, Installation, Testing, Pre-Commissioning, Commissioning, Operations & Maintenance. 2. Skilled in execution and installation of DC system (UPS & battery Banks), PMS, GIS, Telephone System, Closed Circuit Television, PA System & CP System. 3. Spearheaded vendors (VFD, Battery Charger, Battery Bank) during the Pre-Commissioning, Commissioning assistance with OEM, Start-up activities & Ensure Performance of the activities as per the Client Project Forms, IS, IEEE, IEC, EN & API.4. Worked with International Clients: Cairn-Energy, Basrah Gas Company (BCG), Shell, Wood PLC, GASCO, Borouge, Fertil & ADNOC.5. Successfully managed large capital electrical scope to the tune of 8 million USD with 250 Workforce from project conceptualization stage to project closure, managing project costing up to 337 MUSD.

Barmer, Rajasthan, India

1. HSE Policy & Procedure Compliance: Adhere to the CLIENT & CONTRACTOR’s HSE Policy, Procedures, Regulations, Objectives and ensuring that work performed is in compliance with HSES standard and norms.2. Field Engineering: Provide timely field inputs related to technical and construction expertise, along with Construction philosophies to the engineering department, also adhering to the execution time and costs.3. Supervision & Execution Control: Supervise the work of relevant discipline engineers & supervisors of EPC Contractors, ensuring that quality and safety standards are maintained & cost-effective solutions are adopted.4. Coordination Meetings: Coordinate and arrange meetings between Implementation Contractor (IC), EPCC Contractors, PMC and Clients to discuss weekly and monthly progress, technical query approvals (TQA), punch point closing, Final Mechanical Dossier submissions etc.5. Drawings Reviews & Lessons Learned Sharing: Review the OEM/Manufacturer (HV/MV/LV) Switchboards Schematic drawings, AFC Interconnection drawings & AFC Layouts (EPCC) and provide comments based-on Past lessons learned with the engineering department to minimize rework costs and enhance productivity.

Visakhapatnam, Andhra Pradesh, India

1. Conducting audit of installations during construction, witness Factory and site acceptance tests (FAT & SAT) , pre-commissioning and commissioning of equipment / systems and assures that the installation / performance are in accordance with specifications.2. Partake & endorse the FAT (Factory Acceptance Test) for major electrical equipment.3. Following up with the EPC contractor construction planning and progress on daily basis.4. Supporting the effort of resolving the pending and punched items during project stages.5. Adhering the company HSE policy, procedures, regulations and objectives as they relate to area of responsibility and ensuring that work under control is performed in a safe and environmentally sound manner.6. Approving the IMIR / MAR of incoming materials which has been supplied by the contractor based on the approved QAP/ITP, TPI certificate & IRN.7. Supervising installation and testing of High Voltage (33 KV) Power & Distribution Transformers (Up to 31.5 MVA), HV/LV Busduct, (up to 33 KV) Switchgears, Numerical Relays, Control Relay Panels, VFD Drives, Cables, Earthing & Lightning Protection System, Lighting System and testing of LV / MV Motors (up to 15 MW) also conduct the solo run performance test and observe the electrical parameters such as: No Load Current, DE/NDE vibration (A, H, V), DE/NDE bearing temp, and speed.8. Ensuring safe, economic and technically sound decisions related to area of responsibility during the EPC phase.9. Providing on-site electrical engineering consultation during construction, pre-commissioning & commissioning stage and upload the Signed & Witnessed drawings/documents in CAMS [Completion Assurance Management System] documentary portal.10. Participating in: Training & development of assigned UAE national employees in the project & Key design reviews such as PHSER Audit, PSSR Audit, HAZID, HAZOP, Model reviews, SIMOPS.

Al Basra

1. Vendor & Material Management: Attend meetings with vendors/OEMs along with the procurement/supply Management team to understand material Expected Date of Delivery Schedules (EDD), storage plans, and follow up with Approved TPI for IRN clearance during material dispatch.2. Compliance & Certification: Ensure materials supplied by VENDOR is meeting the area classifications/ATEX Certification, CIMFR, PESO, and statutory requirements of OISD, IS, IEC standards, and Client Engineering Specifications, AGES (General Engineering Specification), DEP (SHELL), Installation Standard prior to installation.3. Factory Acceptance Test (FAT): Participate & endorse the FAT for major Tagged Electrical Equipment & register punch points follow up with inspection Dept. for documents uploading in the (iDocs/Acconex) portal.4. Materials Inspection: Obtain approval from PMC/CLIENT for supplied materials on IMIR/MAR (Incoming Materials Inspection Report) based on Design Specification, ATEX Certification, approved QAP/ITP & IRN.5. Installation & Site Acceptance Test (SAT): Supervise the installation and testing of high voltage power transformers and Distribution transformers (up to 33 KV & up to 31.5 MVA), Oil Filtration, HV/MV bus duct (up to 6.6 KV), HV/MV Switchgears (Up to 33 KV) differential and stability tests, numerical relays, control relay panels, VFD drives, Cables, Earthing and lightning protection systems, lighting systems, and testing of LV/MV motors (up to 15 MW) & conduct solo run performance tests for 04 hours and observe electrical parameters (No Load Current, Vibration - DE & NDE, Temperature - DE & NDE, Speed.

Abu Dhabi, United Arab Emirates

1. Red-Line Mark-Up: Execute day to day site activities & ensure that works are carried out as per the latest revision of AFC drawings. Formulate changes based on suit at site conditions through redline mark-ups and obtain approval from the PMC/Client’s Technical Advisor (TA).2. Request for Field Inspection: Raise RFI (Request for Inspection) prior to PMC/CLIENT walk down for work Completion and register punch points given by PMC/CLIENT during walk down and maintain them in the master Punch point register & categories the punch point types (A, B & C) after had discussions with PMC/CLIENT. 3. Final As-Built Preparation: Share Red-Line Mark-ups (RLM) with the engineering department for Final As-Built Preparation & follow up with Document Controller for uploading in the documentary portal.4. Safety Drills & LOTO System: Conduct safety mock drills prior to substation energization, aligning with the HSE team, PMC team, Client Project team & Plant Operation team (END USER), Fire & Safety, and paramedic teams. Adhere to the LOTO system and maintain the Isolation & De-Isolation Certificate & LOTO register.5. Audits & Reviews: Arrange PHSER (Project, Health, Safety, Environmental Review), PSSR (Pre-Safety Start-Up), and RFSU (Ready for Start-up) audits & statutory Approvals. Participate in HAZID, HAZOP, and 3D model reviews (30%, 60%, and 90%) and close out all highlighted observations with tags. Conduct SIMOPS with all agencies.6. Subcontractor Management: Certify the Subcontractor’s monthly RA bills and review Subcontractor Extra Claims, change orders & deviations based on Engineering AFC Drawing Versus Execution Quantities and endorse the executed extra quantities for the preparation of SUB-CON’s Final Amendment.

Mangalore, Karnataka

1. Involved in attending project review meetings for evaluating progress & resolving the areas of bottlenecks in coordination with the client and contractor. Implemented method statements and SAT by reviewing the documentation based on Design General Specification (DGS). 2. Responsible for estimating, managing, planning, and monitoring the electrical aspects of projects from start to finish and managing pre-con meetings to ensure successful handoff from estimating to the field. Planned and scheduled the jobs and day to day site activities by studying project plan, specifications and calculated time requirements while efficiently managing functions, including project financial and cost management.3. Efficiently managed the handover to end user by arranging End User integration, maintenance of new facilities and liquidation of electrical punch list along with project documentation to end User. I was responsible for installations and testing of HV, MCC, PCC, PMCC, LDB & ASB Switch Boards, Power and Distribution Transformers (Up to 31.5 MVA), HV / MV bus ducts, MV & LV VFDs and UPS, Battery bank, Battery Charger and DCDB. Resolved the bottlenecks and design issues, performed testing of LV / MV Motors up to 15 MW motors and instrumentally observed the NLC, vibration, bearing temp and speed.4. Tested the material supplied and followed-up with vendor for completion of the SAT for DC & UPS package system, VFD system and relay configuration for HV/LV switchboards. Followed up with the Account department for early settlements to ensure smooth work flow by verifying the measurement sheet and RA bills/invoices of the contractor. Ensured adherence to quality and safety related issues, OQA / NCR and OSA.

Jamnagar, Gujarat, India

1. I designed and implemented QC systems and procedures to minimize rejections and achieve highest quality standards. Defined operational parameters and ensured strict adherence thereto to generate maximum operational efficiency. Ensure safe working practices to prevent accidents, loss and injury as well as proper maintenance. Charted maintenance schedules for all instruments and closely monitored the maintenance activities, ensuring minimum operation free time, established plan for ensuring compliance to all HSE activities and practices.2. I was involved in testing MCC, PCC, PMCC and HT Switch Boards, POWER TRANSFORMER (Up to 31.5 MVA), Control transformer (415/230V) & Winding heating transformer (230/24V), HT [33KV] & LT bus ducts, UPS, Battery bank, Battery Charger, ACDB and DCDB, power [33 KV] and control cables along with field power panels and welding receptacles, power & lighting panels. I performed testing of 3RB-12 O/L & E/F relays, 7SJ 6111 Motor feeder relays, 7SJ 6112 Transformer feeder relays, 7SJ 64 O/C & E/F relays, 7RW 600 U/V & O/V relays, 7SD 610 Pilot wire protection relays, 7UT 612 Differential relays, Earth Leakage relays.

Kishanganj, Bihar, India

1. I started my career as a Project Engineer, I was accountable for providing AFC drawings and vendor related documents/drawings to site on a timely basis for preparing Incoming Material Inspection Reports [IMIR], ensuring to expedite the site activities. Instrumentally planned pre-commissioning & commissioning activities of the electrical equipment’s for vendor mobilization. 2. Coordinated the Project Manager for reviewing Contractor quotations to ensure that only reasonable pricing is recommended for approval.