Please complete the CAPTCHA to continue
@bechtel.com
✓
LinkedIn matched
A concise factual answer block for searchers comparing this professional profile.
Terry Tadlock, P.E. is listed as Project Engineering Manager at Bechtel Energy Inc. at Bechtel Corporation, based in Katy, Texas, United States. AeroLeads shows a work email signal at bechtel.com and a matched LinkedIn profile for Terry Tadlock, P.E..
Terry Tadlock, P.E. previously worked as Project Engineering Manager at Bechtel Energy at Bechtel Corporation and Global Chief Electrical Engineer at Bechtel Energy (formerly Oil, Gas, & Chemicals) at Bechtel Corporation. Terry Tadlock, P.E. holds Bachelor Of Science - Bs, Electrical Engineering from University Of Washington.
This section adds company-level context without repeating Terry Tadlock, P.E.'s masked contact details.
AeroLeads found 1 current-domain work email signal for Terry Tadlock, P.E.. Compare company email patterns before reaching out.
Experienced Chief Electrical Engineer with a demonstrated history of working in the oil & energy industry. Skilled in EPC, Electrical Engineering, ETAP, Commissioning, and Liquefied Natural Gas (LNG).
Listed skills include Electrical Engineering, Etap, Epc, Petrochemical, and 8 others.
Company context helps verify the profile and gives searchers a useful next step.
A career timeline built from the work history available for this profile.
Reston, Virginia, Us
Developing world-class scale Power-to-X Energy Transition Project utilizing Electrolyzers (~1800MW) to produce Hydrogen, Hydrogen plus CO2 to produce Methanol, and Methanol to eFuels.
Reston, Virginia, Us
Responsible for the functional oversight of all Electrical discipline activities on all Energy / Oil, Gas, & Chemical projects globally including staffing; technical support; training; off-project design reviews and audits; scope and quantity reviews; and jobhour estimate reviews.
Reston, Virginia, Us
Responsible for the functional oversight of all Control Systems discipline activities on all Energy / Oil, Gas, & Chemical projects globally including staffing; technical support; training; off-project design reviews and audits; scope and quantity reviews; and jobhour estimate reviews.
Reston, Virginia, Us
Responsible for the functional oversight of all Electrical discipline activities on all Energy / Oil, Gas, & Chemical projects globally including technical support; training; off-project design reviews and audits; scope and quantity reviews; and jobhour estimate reviews.
Reston, Virginia, Us
Responsible for providing technical oversight required to complete the Escondida Water Supply (EWS) project including completion of the overall and protection & metering single line diagrams, vendor print review of electrical equipment packages, power system studies, and relay coordination & settings. Additionally, I supported multiple projects performing design audits, off-project design reviews, and scope & estimate reviews.
Reston, Virginia, Us
Electrical Engineering Group Supervisor for the EPC phase of the Australia Pacific LNG Project. Responsible for the quality, schedule, and cost performance of the Electrical Engineering Group including SEU support of OSBL areas. Electrical scope includes 7 Prefabricated Substations, interface with 7 11kV Gas Turbine Generators, 33kV Gas Insulated Switchgear (GIS) synchronizing bus, and Power Management System (PMS) with Load Shedding. Substation scope included delivery of the world's largest single piece substation measuring 58m x 20m x 5m weighing 800 metric tons.
Reston, Virginia, Us
Deputy Electrical Engineering Group Supervisor on the FEED phase of the Australia Pacific LNG Project. Responsible for development of project requirements to ensure compliance with Hazardous Area Verification Dossier as required by Australian Standards; development of the Scope & Quantity basis for the June 2011 Estimate; development of the one-line diagrams; and development of Power Management System (PMS) & Load Shedding scope of work.
Reston, Virginia, Us
Supported multiple proposals and studies including to develop Electrical manhours, major electrical equipment pricing, subcontract scope of work/schedule, develop Electrical input to Level II Schedule; perform gap analysis by comparing client’s specifications to Bechtel standard specifications to determine the technical and commercial gaps.
Reston, Virginia, Us
Deputy Electrical Engineering Group Supervisor and responsible Senior Electrical Engineer on the Duke Edwardsport IGCC Project. Responsible for design of overall & detailed single line diagrams; power system studies (load analysis, load flow, short circuit and motor starting) using ETAP; substation layouts; material requisition and vendor print review & approval for 13.8kV switchgear, 4.16kV switchgear/MCCs, 480V switchgear/Smart MCCs, and prefabricated substation buildings; design of motor control schematics; completion of SETROUTE (cable schedule, cable routing & terminations); Factory Acceptance Testing of equipment; Integrated testing of prefabricated substation buildings & equipment.
Reston, Virginia, Us
Sr Electrical Engineer on the Shell Scotford Upgrader Expansion 1 Project. Responsible for area classification design per API RP 505 & NFPA 497, prefabricated substation vendor drawing approvals, LV cable sizing calculations, 600V MCC load schedules & vendor print approval.
Reston, Virginia, Us
Senior Electrical Engineer on Front End Engineering Design (FEED) for multiple 630MW Integrated Gasification Combined Cycle (IGCC) power plants using GE’s Coal Gasification technology. Responsibilities included: Design of overall single line diagrams; power system studies (load analysis, load flow, short circuit and motor starting) using ETAP; substation layouts; cable routing plan; area classification design per API RP 500 & NFPA 497; and ground potential rise calculations per IEEE 367. Preparation of material requisition for 13.8kV switchgear, 4.16kV swgr/MCCs, bus ducts, 480V swgr/MCCs, and prefabricated substation buildings. Calculation of electrical bulk material quantities to support Lump Sum Turnkey (LSTK) cost estimate to clients.
Reston, Virginia, Us
Sr Electrical Commissioning Engineer in P.R. China on the CSPC Nanhai Petrochemicals Project. Responsibilities included: Commissioning of 12 substations, 35kV Gas Insulated Switchgear (GIS), 35/6.3kV & 6kV/400V transformers, 6kV & 380V switchboards and motor starters, 6kV & 380V motors, 380V VSDs, 110VDC UPS, and electric heat tracing system. Commissioning and Site Acceptance Testing of the Electrical Network Monitoring & Control System (ENMCS), which is the SCADA system for the entire 110kV, 35kV, & 6kV power distribution system and included circuit breaker/contactor control of over 300 high voltage devices; frequency-based 35kV & 6kV load shedding; 6kV emergency load restoration; and utility import power & power factor control via OLTCs, generator master controller, & synchronous motor excitation control. Authored switching instructions for 35kV GIS and 6kV & 380V switchboards. Tagging Authority for safety lockout/tagout (LOTO) of 35kV, 6kV, 380V, & 220V equipment. Issuing Authority for Permit To Work for 110kV, 35kV, & 6kV substations.
Reston, Virginia, Us
Sr Electrical Engineer in P.R. China on the CSPC Nanhai Petrochemicals Project. Responsibilities included: Design interface coordination between Site Integration Team and all other EPC contractors to ensure that the technical design interfaces (motor/transformer control & protection; single lines; load schedules; cable sizing; tray fill; area classification) and physical design interfaces (qty, size, location & arrangement of cable ladders; earthing) were correctly designed. Responsible engineer for the 35kV GIS and the Electrical Network Monitoring & Control System (ENMCS), which is the SCADA system for the entire 110kV, 35kV, & 6kV power distribution system. Integrated the control & protection of 4 STGs (60MW ea), 1 GTG (42MW), and 7 35kV-supplied motors into the 35kV switchgear. Design of overall single line diagrams, HV cable sizing calculations, relay coordination & protection studies. Issued material requisitions for the purchase of major electrical equipment.
Reston, Virginia, Us
Lead Project Engineer on the AT&T Wireless 3G/E911 Projects. Responsibilities included: Supervision of Engineering Group Members; Negotiated Architectural/Engineering (A&E) contracts; Managed A&E subcontractors for Denver & Omaha markets; Supported construction throughout build plan which resulted in the Denver & Omaha markets being completed on-schedule and 20% under budget.Lead Regional Project Engineer on the AT&T Wireless 2G Project. Responsibilities included: Supervision of Engineering Group Members; Developed A&E Request for Proposal; Negotiated A&E contracts; Managed A&E subcontractors throughout Colorado, Arizona, Nevada, Utah & New Mexico markets; Supported construction throughout build plan; Provided Electrical Engineering support to the 2G Program Team; Supported AWS 3G Project Kickoff; Supported AWS 2G Cost Reduction Effort; and directly managed Denver, CO market A&Es to support FY01 build plan.
Reston, Virginia, Us
Electrical Engineer on the Lebec Modernization Project #2. Responsibilities included: Performed power system studies (load flow, short circuit analysis & motor starting) using ETAP; Design of medium voltage distribution and one-line diagrams; Developed electrical equipment list from PFDs & P&IDs; Issued material requisitions for purchase of major electrical equipment; Review & approval of vendor dwgs; and Design of motor schematic diagrams.Electrical Field Engineer/Resident Engineer in Carlsbad, NM on the IMC Kalium Langbeinite Project. Responsibilities included: Design of field changes to resolve design errors/omissions, ease installation and minimize installation cost; Issued electrical work packages to craft using SETROUTE; Maintained SETROUTE based on as-built data to track installed quantities, schedule, performance, and to-go quantities; Provided material look ahead to ensure sufficient cable, conduit & cable tray was available on-site; Developed Instrument Loop Database in Access from SETROUTE data in lieu of providing individual Instrument Loop dwgs resulting in substantial manhour savings; Prepared system turnover packages; and Assisted client in startup & troubleshooting of electrical equipment.Electrical Engineer on the IMC Kalium Langbenite Project. Responsibilities included: Prepared electrical control estimate; Maintained electrical load list; Design of one-line diagrams; Prepared material requisitions for bulk material and engineered equipment; Review & approval of vendor drawings; Design of motor controls schematics; Design of instrument terminal box and MCC marshalling cabinet wiring diagrams; Review and approval of power, control, and instrumentation raceway dwgs; Completion of SETROUTE (cable schedule, routing & terminations, and final material takeoff); Design, review and approval of 12.47kV, 2400V and 480V coordination study including protective relay settings for 12.47kV feeders, 2400V bus duct, 2300V motors and 480V feeders.
Reston, Virginia, Us
Project Electrical Engineer on the US West Wireless 2G Project. Responsibilities included management of A&E Subcontractors throughout the Seattle market to obtain zoning & building permits for wireless base station sites.
Reston, Virginia, Us
Electrical Design/Field Engineer at Energy Northwest/WNP-2 for multiple projects including Engineering Backlog Reduction Team, Adjustable Speed Drive (ASD), Digital Feedwater & Turbine Governor Controls Upgrades; Equipment & Floor Drain Control System Upgrade; 125VDC Battery Upgrade; and Refueling Platform Controls Upgrade. Responsibilities included: Preparation of design calculations; Preparation of design change packages for integration into existing plant systems; Preparation of Design Safety Analysis; Review & approval of vendor prints; Preparation of installation instructions; Pre-installation testing; Supervision of field modifications including scheduling of work with Plant Operations, interface with craft superintendents, participation at shift turnover meetings, field design changes, installation instruction modifications, and post-modification testing of systems.
Quick answers generated from the profile data available on this page.
Terry Tadlock, P.E. works for Bechtel Corporation.
Terry Tadlock, P.E. is listed as Project Engineering Manager at Bechtel Energy Inc. at Bechtel Corporation.
AeroLeads has found 1 work email signal at @bechtel.com for Terry Tadlock, P.E. at Bechtel Corporation.
Terry Tadlock, P.E. is based in Katy, Texas, United States while working with Bechtel Corporation.
Terry Tadlock, P.E. has worked for Bechtel Corporation.
You can use AeroLeads to view verified contact signals for Terry Tadlock, P.E. at Bechtel Corporation, including work email, phone, and LinkedIn data when available.
Terry Tadlock, P.E. holds Bachelor Of Science - Bs, Electrical Engineering from University Of Washington.
Terry Tadlock, P.E. is listed with skills including Electrical Engineering, Etap, Epc, Petrochemical, Commissioning, Liquefied Natural Gas, Project Engineering, and Power Generation.
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trial Search contacts