1. Supplier preselection: • Prospect and audit suppliers according to the brand's specifications• Validate the minute cost and the capacity of supplier (volume/ product/machinery/human/... )• Negotiate with suppliers the cost prices product according to the brand's target-price• Approve, with the brand, the supplier’s test order• Define export schedule according to the load/capacity2. Follow-up of samples:• Follow the fabrics/accessories• Plan the production of the samples with the supplier’s design office• Ensure the compliance of samples before sending to the brand, according to specifications and technical files• Define the KPIs of prototyping (delay, cost, quality, compliance, number of correction, responsiveness, ...)3. Follow-up of productions:• Follow the materials/accessories• Check the conformity of fabrics/accessories according to European regulations and laboratory tests• Plan inline/final inspections according to the brand quality manual.• Communicate the retro planning of production/export to the brand• Send the report of inspection to the brand/supplier and give OK/NO loading to the supplier• Define the KPIs of production and classify suppliers4. Regularization of problems: • Propose technical and industrialization solutions for the brand and suppliers• Support production workshops during launches for risk products• Follow fabric consumption/2nd choice and validate the purchase order with the brand• Check that the supplier's quality management system is operational and quantifiable5. Reinforcement of brand design offices/supplier:• Create patterns and their gradations• Calculate consumption fabrics/accessories, cutting plan and pattern placement• Sourcing of fabrics/accessories• Carry out the time of manufacturing, line balancing and implantations of production lines• Carry out prototypes and launches on production lines

• Define the GMP (Good Manufacturing Practice) according to European regulation (EU) 2017/745 for medical devices.• Ensure the construction of the industrial unit LAMATEM and the qualification of the equipment (FAT, SAT, IQ, QO, QP) according to the industrial tool and the GMP (Procedures, protocols, specifications, design qualification, etc.), and verification of calibrations according to the international standards.• Prepare the recruitment plan and training.• Ensure good control of budgets and industrial costs according to technical specification and normative requirement (OEKO TEX, REACH, MSDS, FREE LATEX, HEAVY METAL, HSE, …).• Prepare and pilot prototypes (surgical clothing and drapes, protective clothing, medical equipment, medical face masks, personal eye-protection, ...), skills and specific animations according to ISO 13485, ISO 14644 and ISO 14698.• Implement mass production for certification of the notified organim (British Standards Institution - BSI) and then the CE marking.** recruited by MICHAEL PAGE.

1. Analysis of government tenders• Understand and follow the tenders.• Dialogue with the headquarters for the assessment of all the expectations.• Analyze the need for each tender according to the specifications.• Ensure the allocation of tenders, according to the customer's specifications.• Establish the "sampling" schedule.2. Supervise and organize the teams of the studies office• Define the individual planning schedule for the completion of submission files.• Supervise the teams (methods, designers and prototypists) and validate the progress of tender which are their effects. Provide them with technical and methodological support on the various studies carried out.• Recruit new employees and evaluate individual and collective performance.3. Guarantee market agreement• Follow all conception processes:O Study of models (manufacturing process for industrialization, Pattern Making and gradation, consumption of yarn, consumption of accessories, material use, etc.).O Assign models to the sampling service.O Quality control of prototypes / samples / pre-series according to the customer's specifications.O Submission of study files, prototypes / samples and quality control reports to headquarters.• Advise the headquarters on the technical choices in order to guarantee a market agreement by the customer.4. Manage production and propose projects to improve production• Coordinate the various internal and external actors in the manufacturing process.• Establish the "cutting/manufacturing" schedule.• Present and explain the technical characteristics and operating procedures for production.• Analysis of the availability of equipment and human/technical resources.• Launch and follow the development of prototypes or pre-series of new products in production.• Ensure the maintenance of equipment, hygiene, environment and safety in production.• Define and use performance indicators and management dashboards.

1. Ensuring product quality• Check the specifications of the finished products, fabrics and accessories.• Verify product compliance with customer samples: o Running tests at suppliers. o Validate the quality standards provided by the client with supplier product. o Manage inspections.• Resolve quality disputes with suppliers and customers.• Develop and monitor the traceability of products.2. Establishment the tracking of regulations and standards• Identify and apply the legal requirements and regulatory requirements.• Participate in updating standards on products.3. Animation suppliers panel• Training suppliers in their quality assurance process.• Implement control procedures: o Planning and conducting inspections. o Manage quality 9001/social SA8000/environmental 14001 audits in compliance with all customers policies and guidelines.• Analyze quality dashboards and implement preventive and corrective action plans to reduce no-conformities and promote the improvement, safety and environment of each production units.• Manage contracts with testing laboratories.

1. Optimization and controling expense / capacity• Define the VSM (Value Stream Mapping) flows and / or process (knitting, mending, quality control, washing, finishing, ...).• Analyze the mapping and conduct of each flow and / or processes.• Reconfiguration of the physical flow of goods and people through the spaghetti diagram.• Optimization and standardization of flow and / or process (SMED, Kanban, Takt Time, Lean).• Optimization and standardization of workstations (5S).• Performance Management (6sigma, FMEA)2. Creation an optimal pilot lineCreate a production line based on Lean Six Sigma (standard work, visual management, line balancing, takt time, TRS, 5S, SMED, Kanban, VSM, Kaizen, one piece flow, poka yoke, Bonus).

1. Improvement cost per minute• Define the means and conditions necessary for production.• Diagnose the existing after analyzing the workshops activity.• Plan and anticipate adjustments to be made to increase productivity, while minimizing activity costs by:o Improvement projects with DMAIC.o Innovation and design projects with DFSS.• Provide guidance on cost reduction projects.• Act as a bridge between the Development team, Designers and Methods team.• Assist in development of innovative and practical solutions for each new product.• Price negotiations with Vendors and Methods team.• Assist in resolving complex technical problems by providing guidance.2. Determination a fast and a reliable cost breakdown• Define and maintain standards in PRI SYSTEM and SEAM (operating sheet, nomenclatures, MTM2, Chrono-time, judgment gait, 5S, workstation layout, ergonomics, Line balancing, machine speed, stitch type, skills matrix, rest and fatigue factor, difficulty stitching matrix, attachments, thickness fabric, sewing thread consumption…).• Investigate and implement new technologies.• Coordinate studies on manufacturing operations.• Streamline the means of production and safety.3. Continuous improvement, in 2 modes, of production facilities in production, logistics and sampling/industrialization :• Improve, in project mode, the processes by Lean Six Sigma (standard work , visual management , line balancing, takt time , TRS , 5S, SMED , Kanban , VSM , Kaizen , one piece flow, poka yoke , Bonus)• Improve continuously, in step mode, organization (TPM, active supervision, audit).

1. Structuring the methods office• Define production process, material means and human resources.• Make task lists and data sheets required for smooth running of process.• Save and edit technical data with the SAP integrated software.2. Defining forecast data• Define the estimated times and the projected activities.• Improve the industrialization by technical assistance of Sampling, Methods, Designers and Production team.• Parameter and calculate reliably and quickly provided data with TEXTIVAL and CODEVAL (operating sheet, nomenclatures, MTM2, Chrono-time, judgment gait, 5S, workstation layout, ergonomics, Line balancing, machine speed, stitch type, skills matrix, rest and fatigue factor, difficulty stitching matrix, attachments, thickness fabric, sewing thread consumption…)3. Promotion continuous improvementSupport the changes implementation (organization, working conditions, staff training, reducing rework ...)

1. Performance evaluation of suppliers and manufacturers by them deliveries and follow the associated action plans and improvement• Service rate• Compliance rate• Lead-time• Responsiveness development• Merchandise returns rate• Validity time of prototype• Delay shipments time2. Assessment the environmental impacts• Company• Eco-designed products

• Optimization the workshops activity (improved procedures, workstation ergonomics et studies, development technologies, attachments, balancing, implementation ...).• Determination the projected time in workstation (MTM 2 database, software package by Excel VBA, balancing rate, SRR, IO method ...).

• Analyze process and industrialization of heavy clothing for business unit STRENFIT (backpacks, travel bags, sleeping bags, tents, kages…)• Creation a database of operating modes.• Creation operations range for each product family.• Setting the integrated software SAP (machine speed, rest and fatigue factor, stitch type , ...)• Determination the accuracy between times of the integrated software SAP and those of suppliers.

• Creation a 3D clothing store and a adaptable 3D model to customers measurements on SketchUp, SUBDO and PDF 3D.• Creation and linking clothes (sweater, shirt, dress, pants, bra, panty, string ...) to the 3D model on SketchUp, SUBDO and PDF 3D.• Leading and simulating plumb clothes on movements in 3ds MAX 7and SUBDO.

Creation an associative model linked with standard measurements on Design Concept 3D LECTRA.

Adaptation ABC (Activity Based Costing) method to the ready-to-wear industry.

Comparison features between Gerber and Lectra.