Thien Khang Leong Email and Phone Number

𝗣𝗿𝗼𝗷𝗲𝗰𝘁 𝗧𝗶𝘁𝗹𝗲: 30kW Solar Hybrid Project // 𝗣𝗿𝗼𝗷𝗲𝗰𝘁 𝗩𝗮𝗹𝘂𝗲: RM 2m+// 116 solar panels+3400Ah Battery bankIn my present capacity, I supervise the site inspection, engineering assistance, and subcontractors during installation to keep the solar project on track. I also manage the solar PV system, including modules, inverters, cables, trunking, and earthing, using CAD.𝐌𝐲 𝐨𝐭𝐡𝐞𝐫 𝐣𝐨𝐛 𝐝𝐮𝐭𝐢𝐞𝐬, 𝐢𝐧𝐜𝐥𝐮𝐝𝐞𝐬 𝐭𝐡𝐞 𝐟𝐨𝐥𝐥𝐨𝐰𝐢𝐧𝐠:• Prepare sizing and selection of solar modules, inverters, AC cables [16mm,35mm], DC cables [25mm], trunking and earthing through AutoCAD drawing. • Accountable for executing and steering the solar project, including site inspection, engineering support, and supervision of sub-contractors to ensure project run smoothly with schedule. • Conduct the on-site inspection to verify cable sizing and installation location. • Create load-calculated interior electrical AutoCAD drawing: overhead line, Single line diagram (SLD), electrical layout plan of each block: restroom, office, classroom, hostel, etc. Furthermore, I had involved and successfully passed both of the pre-commissioning: continuity test, energized & normalize batteries; testing & commissioning: solar panel efficiency, testing GCI and ACJ parameter values, and overload test.

As 𝐌𝐚𝐢𝐧𝐭𝐞𝐧𝐚𝐧𝐜𝐞 𝐒𝐮𝐩𝐞𝐫𝐯𝐢𝐬𝐨𝐫 (𝐌&𝐄), I was held responsible for planning, creating, and executing preventive and predictive maintenance, overhauling, and repair schedules to maximize machine uptime and operations. I also maintained safe, efficient, and environmentally compliant facilities through maintenance and repair.𝐌𝐲 𝐨𝐭𝐡𝐞𝐫 𝐣𝐨𝐛 𝐝𝐮𝐭𝐢𝐞𝐬 𝐢𝐧𝐜𝐥𝐮𝐝𝐞 𝐭𝐡𝐞 𝐟𝐨𝐥𝐥𝐨𝐰𝐢𝐧𝐠:• Managed a 5-person electrical installation, troubleshooting, and maintenance crew.• Installed updated load calculators to avoid overloading.• Troubleshoot, maintained, and repaired HVAC, cooling tower, genset, machine parts, etc.• Participated in the new extended building's fire protection system inspection and annual certification.• Handled the renewal Cert DOSH inspection and DOSH audit document.• Used adequate testing equipment to detect and correct system and equipment issues on tight deadlines with 85% success.• Inspected circuit breakers, tightened connections, cleaned ducts, changed filters, and decreased PM & CM costs by 40% on electrical (genset, switchgear box) and HVAC equipment.• Installed about 150 lighting points, 100 socket points, and 20 distribution electrical wiring in high-quality installation service standards. Engineered and designed load calculations.𝐌𝐲 𝐜𝐚𝐫𝐞𝐞𝐫 𝐡𝐢𝐠𝐡𝐥𝐢𝐠𝐡𝐭𝐬 𝐢𝐧𝐜𝐥𝐮𝐝𝐞 𝐭𝐡𝐞 𝐟𝐨𝐥𝐥𝐨𝐰𝐢𝐧𝐠: • Assisted the company in saving a cost of

As a 𝐌𝐞𝐜𝐡𝐚𝐧𝐢𝐜𝐚𝐥 & 𝐄𝐥𝐞𝐜𝐭𝐫𝐢𝐜𝐚𝐥 𝐃𝐞𝐩𝐚𝐫𝐭𝐦𝐞𝐧𝐭 𝐈𝐧𝐭𝐞𝐫𝐧, I played a stellar role in carrying out the inspection and rectification of the M&E system by reviewing the installation of the fire protection system, HV, LV & ELV system for six block condominium project based on CAD, wiring and schematic diagram. I also supervised the problem status of contractors, arranged & scheduled solutions, and coordinated installation on time.𝐌𝐲 𝐨𝐭𝐡𝐞𝐫 𝐣𝐨𝐛 𝐝𝐮𝐭𝐢𝐞𝐬 𝐢𝐧𝐜𝐥𝐮𝐝𝐞 𝐭𝐡𝐞 𝐟𝐨𝐥𝐥𝐨𝐰𝐢𝐧𝐠:•Performed basic or routine maintenance activities to check, inspect, repair, maintain, and install station instrumentation and control equipment and systems.•Slashed down the project faults by 70% by self-inspection on-site and collaboration with the supervisor by assessing the collected installation progress and defects data. Produced an Excel table list and Powerpoint for contractor reference.“𝐓𝐢𝐦𝐞𝐥𝐲 𝐜𝐨𝐦𝐩𝐥𝐞𝐭𝐞𝐝 𝐭𝐡𝐞 𝐨𝐯𝐞𝐫𝐚𝐥𝐥 𝐨𝐩𝐞𝐫𝐚𝐭𝐢𝐨𝐧𝐬 𝐚𝐧𝐝 𝐚𝐛𝐫𝐢𝐝𝐠𝐞𝐝 𝐭𝐡𝐞 𝐩𝐫𝐨𝐣𝐞𝐜𝐭 𝐝𝐞𝐟𝐞𝐜𝐭𝐬 𝐛𝐲 𝟕𝟎%.”