Tibor Congo
AeroLeads people directory · profile

Tibor Congo Email & Phone Number

Sales and Application Engineer at OMICRON electronics
Location: Bundoora, Victoria, Australia 5 work roles 1 school
1 work email found @omicronenergy.com LinkedIn matched
✓ Verified July 2026 4 data sources Profile completeness 100%

Contact Signals · 1 work email

Work email t****@omicronenergy.com
LinkedIn Profile matched
3 free lookups remaining · No credit card
Current company
OMICRON electronics
Role
Sales and Application Engineer
Location
Bundoora, Victoria, Australia
Company size
578 employees

Who is Tibor Congo? Overview

A concise factual answer block for searchers comparing this professional profile.

Quick answer

Tibor Congo is listed as Sales and Application Engineer at OMICRON electronics, a with 578 employees, based in Bundoora, Victoria, Australia. AeroLeads shows a work email signal at omicronenergy.com and a matched LinkedIn profile for Tibor Congo.

Tibor Congo previously worked as Electrical Engineer at Alpine Energy and Electrical Engineer at Glencore. Tibor Congo holds Bachelor Of Engineering (Beng), Electrical And Electronics Engineering from University Of Tasmania.

Company email context

Email format at OMICRON electronics

This section adds company-level context without repeating Tibor Congo's masked contact details.

{first}.{last}@omicronenergy.com
89% confidence

AeroLeads found 1 current-domain work email signal for Tibor Congo. Compare company email patterns before reaching out.

View email format View company profile Management contacts
Profile bio

About Tibor Congo

Bachelor of Engineering (Electrical Power) at University of Tasmania, with first class honours.I started working with Hydro Tasmania Consulting (Now Entura) and while there I was working as part of a highly effective team. I gained experience in the following areas,- Transmission Line Design- Earthing study, including mitigation plans- Secondary system replacement including wiring, IED settings and testing- Testing of metering points, circuit breaker timing, protection relays, current transformersFollowing two and a half years I moved to Powerlink Queensland and was exposed to the following experiences with some great mentors along the way,- SCADA configuration and wiring interfaces- Main grid planning (110kV up)- Commissioning management, including implementation staging and outage management- Primary system designI worked at Mt Isa Mines (Glencore at the time) for 13 monts, this was an amazing experience that gave me the most confidence out of any of my roles. I recommend this post to all Engineers that want to go out of their comfort zone and be challenged to deliver projects "at the coal face".I'm now living/working in NZ with AEL.Along with these main job categories I have picked up many technical and managerial skills during my career development. I am still developing and have no plans to ever stop, it is something I love about my job.I have had significant exposure to the industry that include many work environments and I feel my confidence as a professional has increased, such that it allows me to be a more significant contributor to the projects that I have the opportunity to be a part of.I enjoy challenge and am constantly in pursuit of new learning and improvement, one of the methods I employ to achieve this is to actively share and seek knowledge with my colleagues. My generally friendly and respectful demeanour have been an asset in achieving this in my roles to date and I am confident I can continue this trend into the future.

Listed skills include Electrical Engineering, Power Systems, Substation, Power Distribution, and 14 others.

Current workplace

Tibor Congo's current company

Company context helps verify the profile and gives searchers a useful next step.

OMICRON electronics
Omicron Electronics
Sales and Application Engineer
klaus, vorarlberg, austria
Website
omicronenergy.com
Employees
578
AeroLeads page
Company profile
View company profile Email format
5 roles

Tibor Congo work experience

A career timeline built from the work history available for this profile.

Sales And Application Engineer

Current
Omicron Electronics

Melbourne, Australia

Jan 2020 - Present

Electrical Engineer

Alpine Energy

Timaru, New Zealand

Distribution Utility Electrical Engineer

Nov 2016 - Jan 2020

Electrical Engineer

Glencore

Mt Isa

As a member of the HV distribution team at Glencore - Mt Isa Mines I am contributing in the following fields:- Earthing system testing and analysis of safe thresholds based on IEEE80 and AS/NZS60479- 132kV Transformer Specification- Project management- Secondary System Circuitry Design- AIS and Metal Clad Switchgear Plant Interface- Cable systems (rating, testing)- Overhead line design- Equipment specification and evaluation of offers

Oct 2015 - Nov 2016

Electrical Engineer

Powerlink Queensland

Brisbane, Area, Australia

1. Automation Engineer (Control Systems)1a. SCADA system configuration of RTU and HMI units. Invensys C50 and Sun rev5/6/71b. SCADA system circuitry design1c. Secondary system technical specification document writing2. Main Grid Planning Engineer (System Studies)2a. Power flow simulation and analysis. PSSE2b. Development option analysis and documentation2c. Limitation investigation with option analysis and presentation of results to technical and managerial level… Show more 1. Automation Engineer (Control Systems)1a. SCADA system configuration of RTU and HMI units. Invensys C50 and Sun rev5/6/71b. SCADA system circuitry design1c. Secondary system technical specification document writing2. Main Grid Planning Engineer (System Studies)2a. Power flow simulation and analysis. PSSE2b. Development option analysis and documentation2c. Limitation investigation with option analysis and presentation of results to technical and managerial level colleagues3. Commissioning Engineer3a. Management of commissioning activities3b. Commissioning staging plan development and documentation3c. Outage application and management3d. Commissioning test plan development and review4. Substation Primary Electrical Design Engineer4a. Plant evaluation and selection4b. Management of project work with electrical and civil design/drafting resources4c. Site visit for project plan clarification4d. Equipment manufacturer meetings and discussions for specific supply requirements4e. Improvement of team work processes including automation of project tasks through Visual Basic programming application4f. Interface with SAP information management software and SPF (Smart Plant Foundation) documentation management software Show less

Sep 2009 - Oct 2015

Graduate Engineer

Entura

Hobart, Australia

1. Transmission Line Design (Electrical)1a. Structure design based on clearances specified in C(b)1 guideline (foundation for current AS/NZS 7000)1b. Alignment development with consideration for maximum span tolerance, structure placement (taking into account environment, ownership and practicality)1c. Site investigation for detailed analysis of plan1d. Alignment modelled using PLS-CADD software2. Earthing System2a. Use of CDEGS software to model effect of metallic… Show more 1. Transmission Line Design (Electrical)1a. Structure design based on clearances specified in C(b)1 guideline (foundation for current AS/NZS 7000)1b. Alignment development with consideration for maximum span tolerance, structure placement (taking into account environment, ownership and practicality)1c. Site investigation for detailed analysis of plan1d. Alignment modelled using PLS-CADD software2. Earthing System2a. Use of CDEGS software to model effect of metallic pipelines adjacent to transmission line2b. Face to face and teleconference meetings with clients, private consultants to discuss modelling technique, results, recommendations and mitigation strategies2c. Presentation of study to technical and managerial levels (two separate presentations with targeted content)2d. Reference to AS/NZS 4853 and 604792 for evaluation of simulations3. Protection Design3a. Specification interpretation and analysis3b. Conceptual protection scheme development3c. IED (GE and Areva brand) settings for Feeder, Bus and Transformer protection schemes. Settings implemented using IED proprietary software. PSSE software used for input values where system fault/flow computations required3d. IEDs set with protection settings and control logic combined3e. Performed testing of developed and set protections schemes using OMICRON test sets Show less

Jan 2008 - Sep 2009
Team & coworkers

Colleagues at OMICRON electronics

Other employees you can reach at omicronenergy.com. View company contacts for 578 employees →

BÖ Bedirhan Öz Bedirhan Öz Colleague at Omicron ElectronicsHohenems, Vorarlberg, Austria View → AD Adisa Dietrich Adisa Dietrich Colleague at Omicron ElectronicsAustria View → AE Andreas Elben Andreas Elben Colleague at Omicron ElectronicsBerlin Metropolitan Area, Germany View → LS Luca Schoder Luca Schoder Colleague at Omicron ElectronicsKlaus, Vorarlberg, Austria View → MP Michaela Plangg Michaela Plangg Colleague at Omicron ElectronicsAustria View → RH Robert Hawke Robert Hawke Colleague at Omicron ElectronicsUnited States View → PG Pd Gupta Pd Gupta Colleague at Omicron ElectronicsDelhi, India View → AE Amin Eslami Amin Eslami Colleague at Omicron ElectronicsDornbirn, Vorarlberg, Austria View → GJ Gaby Johnson Gaby Johnson Colleague at Omicron ElectronicsHouston, Texas, United States View → LP Luis Pizarro Luis Pizarro Colleague at Omicron ElectronicsHouston, Texas, United States View →
1 education record

Tibor Congo education

FAQ

Frequently asked questions about Tibor Congo

Quick answers generated from the profile data available on this page.

What company does Tibor Congo work for?

Tibor Congo works for OMICRON electronics.

What is Tibor Congo's role at OMICRON electronics?

Tibor Congo is listed as Sales and Application Engineer at OMICRON electronics.

What is Tibor Congo's email address?

AeroLeads has found 1 work email signal at @omicronenergy.com for Tibor Congo at OMICRON electronics.

Where is Tibor Congo based?

Tibor Congo is based in Bundoora, Victoria, Australia while working with OMICRON electronics.

What companies has Tibor Congo worked for?

Tibor Congo has worked for Omicron Electronics, Alpine Energy, Glencore, Powerlink Queensland, and Entura.

Who are Tibor Congo's colleagues at OMICRON electronics?

Tibor Congo's colleagues at OMICRON electronics include Bedirhan Öz, Adisa Dietrich, Andreas Elben, Luca Schoder, and Michaela Plangg.

How can I contact Tibor Congo?

You can use AeroLeads to view verified contact signals for Tibor Congo at OMICRON electronics, including work email, phone, and LinkedIn data when available.

What schools did Tibor Congo attend?

Tibor Congo holds Bachelor Of Engineering (Beng), Electrical And Electronics Engineering from University Of Tasmania.

What skills is Tibor Congo known for?

Tibor Congo is listed with skills including Electrical Engineering, Power Systems, Substation, Power Distribution, Scada, Commissioning, High Voltage, and Electric Power.

Find 750M verified contacts

Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.