Tony Woodward

Tony Woodward Email and Phone Number

Action Photographer at BattleBots @ BattleBots
vallejo, california, united states
Tony Woodward's Location
San Ramon, California, United States, United States
Tony Woodward's Contact Details

Tony Woodward personal email

n/a

Tony Woodward phone numbers

About Tony Woodward

Interested in exploring more consulting opportunities, as well as full-time employment.

Tony Woodward's Current Company Details
BattleBots

Battlebots

View
Action Photographer at BattleBots
vallejo, california, united states
Website:
battlebots.com
Employees:
43
Tony Woodward Work Experience Details
  • Battlebots
    Action Photographer
    Battlebots Apr 2018 - Present
  • Inneos, Llc
    Senior Design Engineer
    Inneos, Llc Dec 2013 - Present
    Pleasanton, Ca
    Design, schematic, layout, and simulation of high-speed optical and electrical transmission devices in the 3-12Gbps range. Multi-channel, single-fiber solutions for the datacom and video markets. Contributions also include embedded firmware, debug, test, purchasing, and project management.
  • Sustainable Civilization Institute, Llc
    Cto & Cofounder
    Sustainable Civilization Institute, Llc May 2010 - Present
    SCI's objective is the attenuation of war, poverty, and servitude; and the simultaneous augmentation of peace, prosperity, and freedom; by building a science based on observable causes and effects in social interactions.
  • Omron  Network Products
    Senior Staff Engineer
    Omron Network Products May 2011 - Dec 2013
    Pleasanton, Ca
    Development and manufacturing of high-speed optical and electrical transmission devices, combining datacom and video.
  • Stealth Mode Startup
    Consultant - System Design Engineer
    Stealth Mode Startup Jun 2009 - Mar 2011
    - Designed and built driver board for startup in 3D HDTV arena.- Tasks included device selection, all schematics and layout, as well as some board power supply design. Interfaces included HDMI, LVDS, DDR3, USB, SMBus, flash, among others. Also responsible for fab, BOM, assembly, debug.- Wrote microcontroller software to initialize and monitor all major devices on the board.
  • Metaram, Inc.
    Senior Member Of Technical Staff
    Metaram, Inc. Aug 2007 - May 2009
    Designed, built, debugged and validated high capacity DDR3 DIMM modules for servers and workstations.Mentor and Allegro, for schematic capture, layout, library development, crosstalk simulation. Responsible for AVL and BOM, parts procurement.To assist with automated voltage margining, designed test daughterboard to mate with a Coridium ARMmite, and wrote C code to make it go.
  • The Microdisplay Corporation
    Senior Hardware Design Engineer
    The Microdisplay Corporation Feb 2004 - Jul 2007
    We built a 62” rear-projection, single panel LCOS 1080p HDTV from scratch. I/O included 2 HDMI, 3 Component, 3 Composite, 5 audio, RF (ATSC/NTSC), USB, subwoofer, SPDIF, and display panel.Also, project lead on System Development Kits, which enabled customers to evaluate up to 3 of Microdisplay’s E- and F-series display panels simultaneously.Responsible for board layout of all major products: hand place and route; design rule verification; managing outside contractors; and oversight of PCB fabrication.
  • Gluon Networks
    Senior Hardware Design Engineer
    Gluon Networks Jan 2003 - Jan 2004
    Supported development and debug effort of the CLX Class 5 Switch, with ATM-based backplane.Involved with architectural design of additional high-speed slot cards for Switch chassis.Thermal testing of boards and DC-DC converters for evaluation.
  • Vpacket Corporation
    Principal Hardware Design Engineer
    Vpacket Corporation Dec 1999 - Jul 2002
    Designed hardware for each of Vpacket’s hardware families:- A 4 voice port LAN Gateway- The 6100 product, a 12 voice port Voice/Data Router, T1 and DSL versions, which went to full production.- The 8100 Network Control and Uplink Module, a redundant system controller board for the Gigabit Ethernet based 14-slot 8100 chassis.After a debacle with an outside layout vendor, another engineer and I laid out an entirely new NCU board, around the clock, in 3 weeks. The new board worked on all ports with no bit errors.
  • Ascend Communications
    Senior Hardware Design Engineer
    Ascend Communications 1992 - 1999
    Designed hardware for each of Ascend’s major hardware families: Pipeline, Multiband MAX, MAX TNTDesigns included: - Remote Access Switch products MAX1800, MAX2000 and MAX6000 - Several MAX slot cards: 8xT1, 8xBRI, 8/12/16xDigital Modem (9600-56K), 16xDSP, 8xV.110 - Daughterboards for Pipeline product: 4xDigital Modem, Ethernet HubDisciplines included board design and schematics, FPGA and CPLD coding and simulation, integration with software, documentation, and manufacturing support through productionWrote software tools in C as needed to exercise hardware. Software was later used for production testingAcquired agency approval (FCC, Homologation) for many Ascend products
  • Telebit Corporation
    Member Of Technical Staff
    Telebit Corporation Jun 1991 - Jun 1992
    Designed and integrated modems, including a sigma-delta based analog front end interface.Modified ASIC Bit Pump design by creating a prototype with two Actel FPGAs, mapping TI ASIC libraries to Actel primitives, RapidSim simulation, and VGEN scripts for test vectors. Also 68302 and TMS320C25 programming.
  • Cohesive Network
    Hardware Design Engineer
    Cohesive Network Jan 1988 - Jun 1991
    Designed T3 card set to interface T3 trunk to TDM backplane using SMDS protocol within T3 frameModified Subrate Inter-Nodal Link (SINL) card design and saw it through to productionDesigned hardware and software to add X.21 capability for various speeds from 1200bps to 72KbpsHomologated both SINL and X.21 designs for sale in the UKPerformed hardware and software troubleshooting assignments in the field for various products
  • Racal Datacom (Cohesive Network)
    Hardware Design Engineer
    Racal Datacom (Cohesive Network) Jan 1988 - Jun 1991
    · Designed T3 card set to interface T3 trunk to TDM backplane using SMDS protocol within T3 frame · Modified Subrate Inter-Nodal Link (SINL) card design and saw it through to production · Designed hardware and software to add X.21 capability for various speeds from 1200bps to 72Kbps · Homologated both SINL and X.21 designs for sale in the UK · Performed hardware and software troubleshooting assignments in the field for various products
  • Ferranti Interdesign (Gec/Plessey)
    Cad Support Engineer
    Ferranti Interdesign (Gec/Plessey) Sep 1986 - Jan 1988
    Headed project to modify and market a PC-based design station. Created Mentor-based libraries for ASIC families.
  • Raychem Corporation
    Summer Intern
    Raychem Corporation 1983 - 1985
    Wrote programs for cable joint kit automation and data acquisition using VAX-BASIC, Pascal, and Assembly

Tony Woodward Skills

Fpga Debugging Embedded Systems Hardware Architecture Pcb Design Hardware Testing Microprocessors Ethernet Simulations C Microcontrollers Usb Schematic Capture Circuit Design Rf Device Drivers Integration System Design Power Supplies Programming Telecommunications Start Ups Manufacturing Board Layout Troubleshooting

Tony Woodward Education Details

Frequently Asked Questions about Tony Woodward

What company does Tony Woodward work for?

Tony Woodward works for Battlebots

What is Tony Woodward's role at the current company?

Tony Woodward's current role is Action Photographer at BattleBots.

What is Tony Woodward's email address?

Tony Woodward's email address is tw****@****eos.com

What is Tony Woodward's direct phone number?

Tony Woodward's direct phone number is +192530*****

What schools did Tony Woodward attend?

Tony Woodward attended Uc Santa Barbara, Newbury Park High School.

What skills is Tony Woodward known for?

Tony Woodward has skills like Fpga, Debugging, Embedded Systems, Hardware Architecture, Pcb Design, Hardware, Testing, Microprocessors, Ethernet, Simulations, C, Microcontrollers.

Who are Tony Woodward's colleagues?

Tony Woodward's colleagues are Arthur Wang, Sean Lamothe, John Remar, Jayson Pearson, Dylan Mckenzie, Justin Billings, Bella Hue.

Not the Tony Woodward you were looking for?

  • Tony Woodward

    I Am A Full Service Lender,Knowledgeable In Consumer, Commercial And Agricultural Products And Services. Nmls 1799851. Opportunity Bank Of Montana Nmls : 412554
    Townsend, Mt
  • Tony Woodward

    Chief Executive Officer At Woodward Machine Corp
    Casper, Wy
  • Tony Woodward

    Ceo At Woodward Machine Corporation
    Casper, Wy
    2
    woodwardsteering.com, woodwardsteering.com

    3 +130747XXXXX

  • Tony Woodward

    Cincinnati Metropolitan Area
    2
    matw.com, gmail.com

Free Chrome Extension

Find emails, phones & company data instantly

Find verified emails from LinkedIn profiles
Get direct phone numbers & mobile contacts
Access company data & employee information
Works directly on LinkedIn - no copy/paste needed
Get Chrome Extension - Free

Aero Online

Your AI prospecting assistant

Download 750 million emails and 100 million phone numbers

Access emails and phone numbers of over 750 million business users. Instantly download verified profiles using 20+ filters, including location, job title, company, function, and industry.