Vikash Kumar Email & Phone Number

Marmul, Oman

Role & Responsibilities- Perform all daily inspection and test of the scope and character necessary to achieve the quality of construction required in the drawings and Pdo specifications for all works under the contract performed ON or OFF site. Familiar with International Standards ( ACI, ASTM, AASTHO, BS, BSEN, BSCP, DIN and ISO). Review the scope of work and AFC drawings prior to starting activities at the site. Escalate to QAE & Construction team if any new changes are made (or) identify potential issues or discrepancies are made in the AFC drawings. Carry out inspection and checking for all quality related procedures in the site and ensures activity at the site are as per approved method statement and inspection test plan (ITP/QCP). Coordinate with the consultant’s representative and Site In-charge for inspection and meeting about quality problems including the closure of Non-Compliance Report. Taking care of QA/QC documents of the entire project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered and other QA/QC documents. Responsible for the closure of Non-conformance, NCR and Site Instruction. Carry out AIPSM check, quality walk and QTBT at the site with PDO QA/QC on a regular basis and maintain the relevant documents and Pdo SP requirements. Preparing final all reports as per approved ITPs and project specifications. Ensuring and follow up with construction team to close-out of all Snags/Punch-points within the time frame agreed with the client. Conducting and witnessing Construction materials sand, cement, aggregate, steel and all other materials at site as per the relevant Pdo specifications. Inspect the Site construction work and provide non-conformity reports to highlight the deviations. Preparation of final quality dossiers (CCMS check sheets)/test packs and maintaining backups of completed quality dossiers/test packs.

Barauni, Bihar, India

Role & Responsibilities-  Provide expertise in the areas of Quality Assurance, Regulatory Compliance, Design Controls, Risk Management, and Statistical Techniques. Implementing and ensuring the QMP/PQP of the Project at Site. Ensuring all materials are quality assumed as per FQP. Coordinating all the site documentations with proper approved standards. Confirming the quality standards of the project to meet project Standards. Maintaining all required QA/QC formats and register for all materials involved in the construction with approved formats. Coordinating and get all necessary materials /procedural formats from clients for smooth conduction of project in advance. Assisting QA/QC audits from Internal, 3rd party/HO, PMC & Owner And reports as per PQP. Material testing at the site labs as well as coordinating with the external labs. Supporting Quality Engineering activities to improve customer satisfaction and successful achievement of company quality objectives. Providing Mix designs and all lab. Test certificates to the clients and conducts trail mixes of various concrete grades. Maintaining an up-to-date knowledge in the areas of Quality Assurance, Regulatory Compliance, Design Controls, Risk Management, and Statistical Techniques. Maintaining an up-to-date knowledge of the company products, policies, and procedures. Adapt in conducting formal meetings, summarize and close-out pending issues. Responsible for ensuring compliance as per approved ITPs, Procedures, IFC Drawings, Contractual Specification & Tender Documents. Preparation of Project RA Bill (Supply, Price Variation & Construction) as per approved BBU & get Certification from PMC & Client. At project / Unit complete stage ensure all quality control documents are prepared and shall be submit for final hand over.

Kinnuar, Himachal Pradesh, India

Role & Responsibilities-  Preparation of Risk Assessment & Method statement (RAMS) / Inspection test plan (ITP) and Inspection formats (IR) as per technical spec., relevant national and international standards & Contract Documents. Material passing of incoming material checking and verification of records as per ITP & technical spec. and relevant Indian & international Codes. Trail mix of Shotcrete, Cold weather & Normal Weather concrete. Establishment of site material testing lab and ensuring routine tests as per ITP & relevant codes. Performing site checks on concrete – Slump, temperature, cube sampling, cohesion, placing, compaction, finishing, curing etc. Quality control on production of concrete from batching plant. Preparation of DPR/WPR/MPR. & Attending WPR with client. Responsible in controlling, documenting and certifying conformance of the works. Inspection of all finishing works of buildings – Masonry works, plastering works, flooring, false ceiling, Roof treatment, Painting & Grouting works. Preparing and maintain records as per Inspection and Test Plan (ITP). Conducting various training program for foremen, site engineer in order to provide the knowledge of the work activity as per the project requirements to get the good quality at site. At project / Unit complete stage ensure all quality control documents are prepared and shall be submit for final hand over.

Viramgam, Gujarat, India

Role & Responsibilities-  Construction Supervision, Monitoring & Management. Quality Control & Quality Assurance. Planning, Scheduling & Project Control. Monitoring of resources of the construction contractors & expediting. Review of ITPs/QAPs, construction procedures, methodology submitted by contractors. Health, Safety & Environment Management. Coordination with PMC’s Engineering Team. Verification and fulfilment of statutory clearances and enforcement of statutory rules/regulations and Labour Laws for all Contractors. Construction closeout & close-out Report. Provide assistance during 3rd party audits, liquidation of punch list points, pre commissioning, commissioning & start-up phase and Handing Over and Taking Over to assets to Owner/EPMC’s Operation Team. Coordination of Owner/EPMC’s team. Aim to complete the project on before the schedule & shall follow all relevant specifications, codes, tender document, work order and standards applicable for the projects.

Paradeep, Odisha, India

Role & Responsibilities-  Preparation of Method statements / Inspection test plan and inspection formats as per spec & relevant national and international standards. Inspection of incoming material checking and verification of records as per ITP & spec and relevant IS/BIS/Morth codes. Establishment of site material testing lab and ensuring routine tests as per ITP & relevant codes. Performing site checks on concrete – Slump, temperature, cube sampling, cohesion, placing, compaction, finishing, curing etc. Quality control on production of concrete from batching plant. Monitoring and inspection of In-house and sub-contractor works - Substructure, Superstructure, Precast structure and all other aspects of construction activities. Responsible in controlling, documenting and certifying conformance of the works. Inspection of all finishing works of buildings – Masonry works, plastering works, flooring, false ceiling, Roof treatment, Painting & Grouting works. Inspection of Internal RCC road works & Concrete pavements. Preparing and maintain records as per Inspection and Test Plan (ITP). Conducting various training program for foremen, site engineer in order to provide the knowledge of the work activity as per the project requirements to get the good quality at site. At project / Unit complete stage ensure all quality control documents are prepared and shall be submit for final hand over.

Ghazipur, Uttar Pradesh, India

Role & Responsibilities-  Preparation of Job Procedure / Method statements / Inspection test plan and inspection formats as per contract specification & relevant national and international standards. Checking quality of incoming raw materials of concrete, steel, admixtures, other chemicals, painting & finishing items etc. as per QAP and IS and given acceptance or rejection. Monitor the implementation of the approved site QA/QC Plan. Monitoring & Controlling concrete Site as well as B. Plant. Performing of testing work at site & QC Lab as per approved ITP frequency. Performing of trail Mix at site as per Design Mix from Third party NABL Acceleration Lab. for Design Mix approval from Client. Checking quality of concrete by performing different tests of fresh and hardened concrete. Pre & Post Pour Inspection of All majors Structures, DLC Layer, PQC layer & Drain Precast. Controlling of concrete production & Preparation Reconciliation Statement on monthly basis of Concrete production Vs Concrete pouring for wastage of concrete in tolerance limit. Conducting various training program for foremen & Supervisor in order to provide the knowledge of the work activity as per the project requirements to get the good quality at site. Keeping all the data and records as per QAP/ITP/Job Procedure and reporting to QA/QC Manager.

Jamnagar, Gujarat, India

Role & Responsibilities-  Complete site supervision including study of drawings and specifications and ensuring the work done accordingly. Calculation of quantities and making the arrangements to provide all the materials at site within time. Thorough study of drawings and discussion about any problems. Ensuring quality at site by regular checking, Tests of fresh concrete, cube casting and testing, proper curing etc. Pre & Post pours checking after removal of formwork recording punch points and rectification of the punch points. Inspection of Incoming Materials & Preparation of IMIR and get certification from Client as per ITP/Contact Specification. Collection of Drawings from Client/Owner & Circulation on site within time frame. Preparation of Daily Progress Report on daily basis & Share to Site & HO Team.

Jodhpur, Rajasthan, India

1 month summer training from Sanjay Mehta & Associates, Jodhpur in 2015 on Commercial Building Projects.

Bachelor Of Technology - Btech, Civil Engineering, A

6Th - 12Th, Science, A