Vinothkumar Nagaraj Email & Phone Number

Coimbatore, Tn, In

Hyderabad, In

Hyderabad, Telangana, India

Roles & Responsibilities:• Inside Sale & Sales Support: - Attending Initial Client meetings and explain about Engineering Capability and try to convert them as a Hot Lead to proceed on Proposal Stage• Proposal Support: - Once Receive the RFQ from the client, starts working with internal & external Shareholders to prepare the budgetary proposal to the client. • Project Execution Support: - Resource & Software Planning within the budget, Project Planning (Level 3& 4), Kickoff Meeting preparation, Maintaining the weekly & Monthly meeting reports & MOM for the client & Management. Additional Scope Approval & Cost negotiation.• Finance & Billing Support: - Sending the Timesheets or Milestone reports to the client’s and getting approved for the invoice purpose, following up the client for the payment.• Vendor Management: - Cost negotiation on the proposals, Follow-up on the timely delivery of the project, Timesheet & Payment approvals.• After Sales: - Getting feedback about the projects & QAQC procedures and maintaining the records.

Hyderabad Area, India

Projects Handled:• Design & Detail Engineering of Filtration Package (3 Skids), Client: Fores SRL,Italy: • Design & Detail Engineering of 27 Chemical Injection Skids, Client: Fores SRL, Italy, Main• Client: Neste, Singapore• COAL Gasification Plant (CGP)- Client: JSW, Bellary, India• As Built Documentation of Piping Isometrics, Client: Expertise, Italy, Main Client: PALMA SRL, Italy• Structural & Lifting Analysis of FPSO Installed Chemical Injection Skids, Client: PMS, UK MainClient: PERENCO, UK• Structural Drawings Creation & Updation for FPSO(MV-31), Client: Fores, Italy, Main Client: MODEC

Mumbai Area, India

Projects:• Facility no :INEOS GUD 010/K7 Power Plant 1000mw, Client: Bilfinger Piping Technologies GmbHGermany, Sub Client : Steag Energy Services, Main Client: INEOS KÖIL GMBH Germany• LOWER FARS HEAVY OIL DEVELOPMENT PROGRAM PHASE-I (Slop Oil Treatment Package),Client: NOV, U.A.E, Sub Client: Petrofac, UAE, Main Client: KOC, Kuwait• Replacement of Non-NACE / HIC affected Separators at SEK GC's 1, 3, 4,6 & 8, contract no. 16052697, Client: Perfect International (FZE),U.A.E, Sub Client: Gulf Spec Kuwait,Main Client: KOC, Kuwait• SWRO Skid Structural Steel Detail Engineering , Client: Perfect International (FZE),U.A.E Main Client: Alpha Utilities FZE, U.A.E• EPC FOR AL DABB'IYA SURFACE FACITILIES PHASE III, ADCO, Abu Dhabi, UAE Main Client:ADCO, Abu Dhabi, UAE, Sub Client: Tecnimont, Client: Fores Engineering Slr, Italy

Bangalore

Reporting to Manager Energy TeamOne of the Leading USA based Engineering Consulting Firm.Software’s Using: PDMS 12.1, Microstation V8i, Naviswork 2015Projects: • UNIT OF NITROGEN FERTILIZERS V (UFN V), BOILER FEED WATER AND STEAM GENERATION Unit, Client: Macchi Italy, Main Client : Petrobras, BrazilRoles & Responsibilities: Responsible for Layout & Detail Engineering of Boiler Steam Generation Unit. Managing 4 Members team (1 Designer & 3 Draftsman) Designing the Equipments, Walkways, Pipe routings, Responsible for Client Weekly status report & PDMS Component request sheet, Coordinating with the Admin and client, getting the Catalogue Updation. Checking the Model & Deliverables (such as Fabrication Isometrics and Support Drawings, etc) and maintaining the quality of the team.

Bangalore Area, India

• Cidade De Caraguatatuba MV27, MODEC & Toyo Engineering(MTOPS), Japan. from 01st Oct 2013 Roles & Responsibilities: Reviewing Project Specifications, Administrative, Technical Practices, Design Instructions and Plot plan, PID from Client and Supplier. Responsible for FPSO Spread Moored Raiser Module, Modeling Equipments, Access ways, Emergency Escape ways and fixing its location as per plot plan, routing Process, Utility & Fire Fighting Pipes.  Making and Updating the Nozzle orientation & Vessel clip Drawings, Reviewing vendor Drawings. Extracting MTO (Piping, Insulation, Valves, SP-Items Etc...) Modeling the supports using PDMS MDS Extracting & Checking the Construction Isometrics and maintaining the quality of the deliverables. Involved in 30 & 60% model review, updating the review comments. Communicate and interface with other Project Design Engineering Disciplines and client.• Cedade De Marica- SBM Offshore, Monaco & Schiedam from July 2013 to Nov 2014Roles & Responsibilities:  Worked on Design Updation Team, Routing and modifying the Pipes & supports as per Latest P&ID, Stress Updates and Client requirement using PDMS Outfitting & MDS. Extracting the Construction Isometrics and maintaining Quality of the deliverables.

Coimbatore Area, India

Projects Worked:• Laggon Tormore, Total UK from 2011 to 2013 • MADDOG, BP, USA• AKAL-J, PEMEX, MEXICO• DOX-Plant, CB&I LUMMUS/WILLIAMS ENERGY SERVIESRoles & Responsibilities: Responsible for Complete Skid or Package, starting from the scratch to Delivering the construction drawing to the Site ,Managing the USA-Dedicated Engineering Team, Reviewing Project Specifications, Administrative, Technical Practices, Design Instructions and Plot plan, PID from Client and Supplier, Designing the Skid as per Client Size requirements, Designing of Structures, Equipments (Inventor 2012), Piping Layout , Supports (MDS) & Cable trays. Making Piping GA drawings, Nozzle Orientation & Vessel Clip Drawings, Support Drawing, Extracting Isometrics and MTO using PDMS Draft & Isodraft.  Communicate and interface with other Project Design Engineering Disciplines, Head Office and Construction Team.Deputated to USA, Houston Engineering Head Office, Purpose of Deputation: To support Engineering Team & to learn the Latest Trends and Technology using in the Process Engineering Division. Lessons Learned: Challenges in the Fabrication, Commissioning & Shipping activities of Packages

Chennai Area, India

Project Worked:• In Salah Gas (ISG), AlgeriaRoles & Responsibilities:  Responsible for the 36 Onshore Well Heads & it’s Piping Network Connection to the refinery. Designing Wellhead area from the Christmas tree valve to the network header. Designing Equipments, Pipe Routings and Pipe Supports for Utility area to customers & Flare lines. Designing Civil and Structural Steels inputs such as Pipe racks, staircase and ladders, Extracting Isometrics and MTO Using PDMS Draft, Isodraft and Autocad.  Communicate and interface with inter-disciplines.

Abudhabi, Uae

Project Worked:• SWI-3, TakreerRoles & Responsibilities:  Designing Equipments, Pipe layout and Pipe Supports from sea water jetty area to storage area. Designing Civil and Structural Steels inputs, Extracting Isometrics• SMP-4 (Part of 4th NGL Expansion Project) - Al Ruwais, GASCO, Sub-Client: PETROFAC & GS JV (As a Site Design & Construction Co-ordinator) Roles & Responsiblities: Designing the small bore piping according to the site space availability and client requirement. Measuring & Making the As-build drawings Using Autocad & PDMS.  Checking the Engineering Drawings, Isometrics, co-ordinating with Design and Construction Team. Assisting the Construction team in terms of the daily activity with Engineering Drawings.Achievements: As a Single Designer 75% of As build drawings converted into PDMS model

Bergen Area, Norway

Worked in the New Production and Maintenance department, assisting and resolving the Technical issues related to the production, processes in the manufacturing of seismic steamers, Touyboyes and Stretches,Involved an active participation in the development of the production activity with particular focus on quality, safety and efficiency. Active in the evaluation of process tools and equipment in relation to QHSE and Suggesting improvements that can increase the safety of the activities developed in the work area. Reporting hazardous situations by using RIR as the main reporting tool.

Hyderabad Area, India

Process Planning & Engineering Change Management.Creating and Maintaining the Process Plan for Griffin Engineering Plant Engine Assembly line with the help of CAPP+ and MCSTeam Centre Visualization.Creating the Visuals for a Particular operation of Engine Assembly line using Vis Mock-up. This will give a clear understanding to workmen for assembly sequence in each and every stage Preparing Time Standards for Engine Assembly. Maintaining the Team Quality by regular quality audit of all team members. Making Quality Analysis reports for Team members Incentive and Increment, Taking care of New Team Members Training.

B-Tech, Mechanical Engineering, First Class

76.9%

Master Of Business Administration - Mba, Project Management

Pg Diploma, Piping Design And Engineering, Second Class

Grade : B

Diploma, Mechanical Engineering (Sandwich), First Class

75%