Wayne Archer Email & Phone Number

Australia

● Operate and maintain the water production plants using SCADA operating system● Responding to plant breakdowns and process upsets, fault find and rectify. ● Mentor new starters in operating various WTPs● Collecting, preparing, and processing water samples and making required process changes.● Perform routine checks and sampling on various equipment including;▪ FSA, Poly and Chlorine dosing systems.▪ Clarifiers, Sludge Thickeners, Filter Beds, Pumps, Fans, Compressors,▪ Level indicators, flow indicators and VVVF drives● Nominated OHS representative for my department▪ Conduct safety audits / attend regional, and state safety meetings

Australia

• In charge of the commissioning permit office, overseeing the issuing of Cold work / Hot work / Confined Space Entry / Excavation and Penetration / Grid mesh and Floor removal / HV Switching / Elect Vicinity and Working at heights permits● Coordinate and authorise SIMOPS activities / Review and validate new permits for issue.● Ensure statutory requirements are complied with for the permitting system.● Ensure integrity of permit to work system in area of responsibility.● Investigate major safety and permit to work incidents.● Coaching / Training of new permit holders and permit coordinators.● Conducting job site audits and monitoring safe work practices.● Conduct weekly meetings with management & vendors regarding permit requirements, strategies & scheduling.

Wheatstone Lng Project

• Coordinate and issue commissioning & operations permits including;• Cold Work / Hot work / CSE / Excavation and Penetration / Grid Mesh and Floor removal / HV Switching / Elect Vicinity / Working at Heights• Coordinate and authorise SIMOPS activities.• Review and validate new permits for issue.• Ensure statutory requirements are complied with for the permitting system.• Ensure integrity of permit to work system in area of responsibility.• Investigate major safety and permit to work incidents.• Training of new permit coordinators.• Conducting job site audits and monitoring safe work practices.• Liaise with management & vendors regarding permit requirements, strategies & scheduling

Mount Marion Lithium

• Control Room Operator• Start up, shut down and isolation of plant• Collecting and preparing samples. • Perform routine daily checklists, logging check sheets,• Daily figures, gas allocation nominations, incident reporting• Unloading of LNG delivery trucks • Liaise with management & vendors regarding operating requirements, strategies & scheduling.• Operation and maintenance tasks on a range of equipment, including;• LNG Powered QSK60G and QSV91-G4 Cummins Generators• LNG Storage facility • Emergency diesel generators

Gorgon Lng Project - Barrow Island

Coordinate, review and issue construction, commissioning and operations permits including;• Cold work / Hot work / Confined Space Entry• Excavation and Penetration / Gridmesh removal• Review and validate new permits for issue.• Ensure statutory requirements are complied with.• Ensure integrity of permit to work system responsibility.• Investigate major safety and permit to work incidents.• Coaching / Training of new Work Team Leaders and Permit Authorities.• Conducting job site audits and monitoring safe work practices.• Liaise with management and vendors regarding permit requirements, strategies and scheduling.

Karratha Wa

• Coordinate and issue construction and commissioning permits including;• Cold work / Hot work / Confined Space Entry• Excavation and Penetration / Gridmesh removal• Validate new permits for issue.• Ensure statutory requirements are complied with.• Ensure integrity of permit to work system responsibility.• Investigate major safety and permit to work incidents.• Coaching / Training of new permit holders.• Conducting job site audits and monitoring safe work practices.• Liaise with management and vendors regarding permit requirements, strategies and scheduling.

Pilbara Iron - Dampier Power Station / Yurralyi Power Station

• Start up, shut down and isolation of plant.• Operation of Yokagawa DCS control room and coordination of shift activities.• Backshift Team Leader, Relief Network Controller and Gas System Analyst. • Collecting, preparing and processing water samples and making required process changes. • Operate, perform routine checklists, logging check sheets, nightly figures, gas allocation nominations, incident reporting and maintenance tasks on a wide range of equipment, including; Steam turbines (Parsons and English Electric) and boilers Boiler feed water system Reverse osmosis microfiltration plant Chlorination plant Plant air and instrument air systems Emergency diesel generator and Fire water systems Charcoal filters / Water softeners

Karratha Wa

• Commissioning, start up, shut down and isolation of production plant • Competent in all field operating positions.• Site Response Team Leader.• Permitting and Isolations / Hot work and CSE gas testing.• Instigated a new PTW format and master permit system.• Responding to plant breakdowns and process upsets.• Operate, perform routine checklists, logging check sheets, Incident and event reporting and maintenance tasks on a wide range of equipment, including; Nitrogen plant and chlorine dosing plant Demin plant , fresh and salt water cooling systems Boilers, captive power plants and steam turbines Primary and secondary reformers Refrigeration / compressor circuits Plant air and instrument air systems Emergency diesel generator and fire water systems

Samson Brook Dam - Waroona Wa/ Stirling Dam - Harvey Wa

• Commissioning, start up, shut down and isolation of production plant.• Responding to plant breakdowns and process upsets.• Collecting, preparing and processing water samples and making required process changes.• Operate, perform routine checklists, logging check sheets, Incident and event reporting and maintenance tasks on a wide range of equipment, including; Lime, Fluorosilicic Acid, Alum, C02, and Chlorine dosing systems Pumps, fans, compressors, clarifiers, filter beds, Level indicators, density gauges, flow indicators and VVVF drives

Clyde Refinery, Sydney

• Isolation of equipment for maintenance using the permit system.• Routine checklists and maintenance tasks of plant and equipment.• Start up and shut down of production equip.• Responding to plant breakdowns and process upsets.• Collecting, preparing and processing daily boiler feed water samples.• Logging check sheets, Incident and event reporting on QIR.• Operate, perform routine checklists and maintenance tasks on a wide range of equipment, including; Water tube and fire tube boilers, turbine equipment Boiler feed water, water treatment plants and refining systems Pumps, fans, compressors, level indicators, flow indicators, ESD circuits

Port Hedland

• Liaise with maintenance regarding maintenance requirements, strategies and scheduling. • Lead to ensure a 24-48 hour maintenance plan that is communicated to shift personnel.• Develop a weekly maintenance plan in conjunction with the Maintenance Coordinator and ensure this schedule is met.• Prioritising and scheduling of maintenance windows.• Plan and coordinate major process isolations and de-isolations for shutdowns etc.• Approve permits for planned maintenance work.• Ensure statutory requirements are complied with for the area.• Ensure integrity of permit to work system in area of responsibility.• Investigate major safety and permit to work incidents.• Schedule rotation of operating equipment.• Manage the timely delivery of consumables such as MgO, nitrogen, graphite etc. • Create and maintain productive working relationships with the work group.• Monitor and ensure a high housekeeping standard in the plant.• Ongoing review of work to identify improvements and the elimination of waste.• Raising work notifications on SAP.• Completed commissioning of Trains 1, 2, 3 and 4 at Boodarie Iron.• Write and conduct WIN reviews.• Safe operation of the Direct Reduced Iron (Fin Met) process in the Reactors / Utilities areas.• Carry out isolations and de-isolations on plant equipment to allow maint to be carried out safely.• Conduct routine checks of operating plant.• Conduct samples for quality control as per the operating sampling regime.

Kemerton Wa

• Operation of Taylor Mod 3 DCS control room and coordination of shift activities.• Collecting, preparing and processing silicon samples and making required process changes.• Perform routine operation on a wide range of plant and equipment including; Stoking, tapping and casting of Silicon metal into moulds RO water treatment plant and oxygen refining systems XRF Sampling System  Mobile plant Operation (Dango, Excavator, loader, bobcat, forklift, cranes)