Please complete the CAPTCHA to continue
@earthlink.net
✓
LinkedIn matched
A concise factual answer block for searchers comparing this professional profile.
Wayne Pedlar, P.E. is listed as Retired Plant Manager at Laketran, based in Madison, Ohio, United States. AeroLeads shows a work email signal at earthlink.net and a matched LinkedIn profile for Wayne Pedlar, P.E..
Wayne Pedlar, P.E. previously worked as Dial-A-Ride Driver at Laketran and Plant Manager at Polynt-Reichhold. Wayne Pedlar, P.E. holds Bs, Chemical Engineering from University Of Cincinnati.
This section adds company-level context without repeating Wayne Pedlar, P.E.'s masked contact details.
AeroLeads found 1 current-domain work email signal for Wayne Pedlar, P.E.. Compare company email patterns before reaching out.
Retired performance-driven Manufacturing Executive, with 20+ years of experience spearheading successful top-tier, transitional, and start-up manufacturing operations. Adept at continuous improvement using high performance work teams developed through mentoring and personnel development strategies with a strong record of identifying and realizing opportunities to improve processes and reduce costs. Strong record of designing and overseeing scalable strategies that break down broad-reaching corporate objectives into actionable, achievable steps. Consistent history of improving productivity, quality, safety, product yields, customer service, technical solutions, and company-wide policies. Skilled at partnering strong P&L, budgeting, and financial management qualifications with in-depth knowledge of manufacturing best practices to create revolutionary growth with the ability to communicate these best practices across organizational boundaries. AREAS OF EXPERTISE INCLUDE: Strategic Analysis & Planning; P&L; Purchasing Management; Process Improvement; New Product Introduction, MRP; Lean Manufacturing; TQM; ISO 9000; OSHA/Regulatory Compliance; Environmental Permitting and Compliance; Contract Negotiations; Six Sigma; Customer Relationship Management; Resource Planning; Inventory & Materials Management; Warehousing; Budgeting & Cost Control; Quality Improvement; Production Processes & Standards; Plant Relocation; Personnel Training, Management, Staffing, Mentoring & Development, Tier 1 Automotive Supply
Listed skills include Six Sigma, Process Improvement, Lean Manufacturing, Product Development, and 46 others.
Company context helps verify the profile and gives searchers a useful next step.
A career timeline built from the work history available for this profile.
Painesville Twp, Oh - Ohio, Us
Dial-a-Ride provides door to dose transportation anywhere in Lake County, Ohio for any resident of the county but with a special emphasis on serving the needs of seniors and people with disabilities.
Polynt-Reichhold is one of the world’s largest suppliers of unsaturated polyester resins for composites and a leading supplier of coating resins for a wide variety of markets and applications.
Ashtabula, Oh, Us
Iten offers plastics and composites fabrication, injection molding, pultrusion, ballistic materials, and high-pressure laminates. Delivered two consecutive months of bottom line profitability (first time that had occurred at Iten in over four years.
Ashtabula, Oh, Us
Chromaflo Technologies is the largest independent global supplier of chemical and pigment dispersions to the thermoset composites and architectural & industrial paint and coatings industries. Our diverse technical and custom manufacturing capabilities provide color solutions to meet the most complex requirements.
Responsible for operations at Tower Industries, a $6M private company manufacturing, fabricating and installing a variety of premium surfacing products including Meridian solid surface, quartz, granite, custom shower bases and wall systems and various cultured products, as well as manufacturing samples for a major supplier of engineered quartz surfacing materials. Reduced cost of installed sales returns by $50K annually, secured business of major new fabricator client (annual sales of >$100K) based on prior strong business relationship with this client.
Canton, Us
501(c)3 that promotes and supports the arts in Canton, Michigan and the surrounding area.
Taylor, Texas, Us
Full P&L and operating responsibility for $30M facility manufacturing, fabricating and selling epoxy resin, engineered and natural stone work surfaces. Private equity partners were Stonebridge Partners and Quad C Management. Cut operating costs by $1.25M annually through yield improvements, formula optimization, reduced scrap costs. Obtained ISO 9001 certification (first for the company) in less than 12 months. Improved operating performance of facility and the company (>15% compounded annual EBITDA growth) helping to bring about a successful sale of business from Stonebridge Partners to Quad C Management in September 2010. Quad C successfully sold Durcon to Wilsonart in November 2013.
Taylor, Texas, Us
Full P&L for plant producing epoxy resin based worksurfaces for laboratory, commercial and industrial use. Promoted to GM of Michigan facility in less than 1 year based on success demonstrated in improving operations of Texas facility.
P&L management for $25MM facility of this manufacturer of extruded plastic netting. Turnaround situation in business growing 20% annually. Maintained margins despite a 50% increase in plastic resin prices during 2004 - 2005. Put in place scrap recycling program that cut raw material costs by $250K annually. Obtained ISO 9001 certification (first in company) in just over 12 months. Transitioned facility to a 24/7 operation utilizing employee developed 12-hour shift schedule. Private equity owner RFE Investment Partners sold the business for over 4X their investment in late 2005.
Winona, Mn, Us
Management of $30M custom plastics compounding plant serving West Coast markets (all proprietary products) that was part of a $300M family owned company. Doubled facility size while there. Saved $100K annually on worker's comp costs by improving safety performance and setting up a retrospective rating plan. Trimmed operating costs by 5% annually.
Managed all manufacturing operations for this division of Daicel Plastics (Japan). Oversaw a $7M expansion and relocation of the business including securing $50,000 electric utility rebate and a $200,000 training grant from state of NJ. Provided contract compounding services to major plastics suppliers including Cyro, Ticona, Rohm and Haas and GE Plastics (now Sabic). Successfully closed former facility and received clearance under New Jersey's Environmental Cleanup and Responsibility Act for sale of facility.
Riyadh, Sa
Quality management responsibilities for the Cycolac ABS business (a $600M business)
Product manager for the automotive product line of Borg Warner Chemicals Cycolac brand ABS
Quick answers generated from the profile data available on this page.
Wayne Pedlar, P.E. works for Laketran.
Wayne Pedlar, P.E. is listed as Retired Plant Manager at Laketran.
AeroLeads has found 1 work email signal at @earthlink.net for Wayne Pedlar, P.E. at Laketran.
Wayne Pedlar, P.E. is based in Madison, Ohio, United States while working with Laketran.
Wayne Pedlar, P.E. has worked for Laketran, Polynt-Reichhold, Iten Industries, Inc., Chromaflo Technologies, and Tower Industries Ltd..
You can use AeroLeads to view verified contact signals for Wayne Pedlar, P.E. at Laketran, including work email, phone, and LinkedIn data when available.
Wayne Pedlar, P.E. holds Bs, Chemical Engineering from University Of Cincinnati.
Wayne Pedlar, P.E. is listed with skills including Six Sigma, Process Improvement, Lean Manufacturing, Product Development, Budgets, Iso, Leadership, and Contract Negotiation.
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trial Search contacts