-Act as a liaison between upper management, on-site supervision, and the client to fulfill necessary tasks.- Manage equipment/labor resources and costs through all life cycles of the project.- Write and execute Subcontracts and Purchase Agreements.-Verify quantity and catalog numbers of material received versus requirements from Issued for Construction drawings. -Track labor production and determine applicable job codes.-Provide month-end invoicing and change orders to the client for payment.- Manage multiple, fast-paced projects, with varying scope ranging from $4M to $15M in revenue.- Assist in project site visits and pre-construction activities including quantity take-offs, subcontractor correspondence, and material quotes

 Supervise 26 miles of 230kV transmission line for the Frankling-McComb Project, which involves leading right-of-way (ROW) and transmission line construction, guiding ROW contractors, and ensuring compliance with Entergy, local, and federal specifications Supervised a 5 man crew successfully convert a 2 mile 115kV section from a single circuit to a 230kV dual circuit within a two week outage time frame  Oversee all clearing activities by coordinating between OCI and Woodson, Inc., as well as wire pulling and pole setting activities for the T-line contractor Handle the preparation and submission of progress reports, three-week look-ahead, and the stormwater pollution prevention plan (SWPPP) to protect wetlands and environmentally sensitive areas during construction Enforce compliance with all safety guidelines when conducting maintenance, repair, and construction work Assign tasks and lead personnel in the; construction, installation, maintenance, and repair of high-voltage overhead transmission lines; inspection and patrol of transmission lines; clearance of ROW obstructions; and examination of switchgear, transformers, and other auxiliary equipment Maintain active communication with engineering, customers, design, and other groups to effectively understand contract program needs and ascertain that commitments are achieved within defined time and budget constraints

 Provided leadership to the operations of the Cassava EPC project for American Electric Power (AEP), which involved construction a new138/69kV Cassava substation and rebuilding an existing tap line from 69kV to 138kV Supported the construction manager in interacting with clients, handling craft time sheets, receiving substation and T-line materials, generating daily production reports, inspecting equipment, and procuring resources Rendered assistance to the material manager in examining all procured materials for acceptance, as well as coordinating shared use of equipment with subcontractors Organized weekly coordination meetings with field staff and subcontractors Enforced compliance with safety, quality, ethical standards, lessons learned, and performance management programs in accordance with division policies, standards, guides, and contractual commitments Coordinated with the safety and quality managers in resolving safety and quality issues

• Acquired a total of 4 unit’s (residential and commercial) units over a period of 3 years. • Three properties are under current ownership. • Responsible for asset management, proactive risk management on all properties and identifying any & all ways to increase equity and cash flow.• Responsible for bookkeeping, receipts management, invoice management, cash flow management, financial statements preparation (income statements, P/L statements, etc.) and eventual tax document preparation to hand off to accountants.• Supervised third party property management and operations using Four Seasons property managers from my Charlotte, NC location. Property Managers handle on-site property maintenance, rent collection and other miscellaneous tenant issues.• Negotiated directly with Realtors, Selling Agents and Private Owners (FSBOs) on multiple creative financing deals. Three of Four properties currently under ownership were owner financed deals.• Conducted financial analysis of all properties acquired: cash flow analysis, expenses analysis, cap rate, future equity appreciation, etc.

 Directed the construction of 14 miles of 135kV transmission line, including four unique tubular steel structures for AEP; successfully completed the project within schedule with no recordable OSHA violations Oversaw concrete foundations, rebar, anchor bolts, steel erection, and conductor stringing for QA/QC, drawing accuracy, and specification compliance Assigned tasks and supervised construction personnel in managing construction, installation, maintenance, and repair of high-voltage overhead transmission lines and appurtenances, ensuring compliance with safety guidelines at all times Facilitated training and employee development programs to support subordinate development and advancement Led the inspection of switchgear, transformers, and other auxiliary equipment to ensure operability

 Spearheaded construction activities for 52 miles of 345kV transmission line including 10 unique structure types primarily configured from both tubular steel and lattice type structures for Sharyland Utilities Worked with engineering and subcontractors in resolving issues and deficiencies identified during foundation installation, steel erection, and conductor stringing Monitored and documented poured foundations, erected steel structures, material quantities, and manpower to support schedule planning activities Collaborated with, engineering, operations, contract personnel, and relevant parties in creating construction work plan, with focus on the timely and successful achievement of project goals based on plans Attended construction conference calls and meetings to discuss project status and maintenance work Recorded contract crew activities, and submitted reports and updates to senior management Made certain that field personnel were properly trained and were well-equipped in accordance with company guidelines

 Rendered support to the Portland General Electric (PGE) in mechanical startup engineering of 12 W18V50SG Wartsila natural gas engines and BOP equipment Managed activities among vendors, craft, and engineering in blowing down and commissioning plant equipment, such as circulation water, closed cycle cooling, lube oil systems, potable water, instrument air, starting air, and fuel gas systems Established procedures outlining state and local government standards, Wartsila requirements, and engineering standards for each system Checked all systems for any deviations in piping and instrumentation diagrams (P&IDs), and worked with construction to address the deviations Initiated run-ins on all pumps and motors, checking final alignments and recording temperature and vibration for turnover packages Recommended innovative solutions to improve operational procedures Arranged project schedules to successfully meet commitments within established timelines

 Contributed to the upgrade of waste water, water chlorination, and water demineralization systems, as well as the replacement of old I/O cabinets to new Metso I/O cabinets Monitored construction manpower, schedule cabinet setting, panel re-work, cable installation and termination, cabinet power up, I/O checkout, and equipment ready progress Conducted systematic point-to-point testing of I/O points, system functionality tests, and DCS logic verification Collaborated with design engineers and contractors in resolving issues with I/O cabinets wiring, logic, and drawing Participated in the collection of construction records and closeout activities documentation

 Coordinated LOTO training and lockouts for outages and equipment modification Utilized P&IDs to guarantee the effectiveness of isolations during walkdowns and system checks Supervised craft and technical advisors on the cold and hot commissioning of Clyde Bergemann smart cannons and soot-blowers Participated in testing and tuning the performance the fly ash, NOx emissions, O2 emission, pulverizers, and a 950MW steam generator Guided subordinates in the maintenance of air preheaters, pulverizers, boiler feed pumps, and polishing systems Documented deficiencies on a master punch list, and worked with startup, construction, and NAES operations to address those items Initiated LOTO training presentations to jobsite personnel, client personnel, and others as needed Established track record for having no incidents during tenure

As project engineer, responsible for reviewing and writing RFI’s as well as updating the construction drawings and specs for engineered RFI responses. Reviewed the product data and shop drawing submittals to verify if each was in compliance with the construction specs and drawings. Completed and forwarded a bid package for a material man hoist that contained the scope and contracts for the hoist. In addition, completed daily safety walks to confirm that the site and subs were in accordance with OSHA rules and recorded observations in ISMS safety program.As field engineer, reviewed the construction drawings and authenticated if rebar, concrete, and MEP were dimensioned correctly and positioned properly. Assisted in finishing the concrete footings for the mockup and was educated in basic manpower and equipment logistics, inspection process, and heavy equipment operations. Improved knowledge of scheduling through observing subcontractor coordination meetings and was educated on common field problems and solution methods

Project Engineer duties: Responsible for reviewing the drawings and specs to become familiar with mission critical data center construction. Updated drawings according to engineered reviewed RFI’s, and checked the interior and exterior concrete architectural finishes for discrepancies while creating a punch list. Constructed a notebook of the major MEP components for the QAQC report.Field Engineer duties: Responsible for coordinating the grading and waterproofing subcontractor duties, including man power, work schedule, inspections, and completion time of the south wall backfilling operation. Surveyed the final elevations around the building.