Freelance Quality Inspector - Mechanical / Welding / Piping / E&I• Monitoring manufacturing activities / process.• Execution intermediate / final inspection on raw materials and equipment.• supervise Destructive or Non Destructive Tests• Welding inspections• Visual and dimensional examination• Verification of surface finishing and painting• Identification and traceability of the materials• Check of material identification• PMI - Positive Material Identification• Packing and marking inspection• Chemical and Mechanical laboratory tests• Pressure tests (hydraulic, air, gas tests, etc.).• FAT – Factory Acceptance Tests• Running tests• Conditioning inspection• Performance tests• Trial assembly• Electrical inspections.• Electromechanical inspections• PSI – Pre Shipment Inspection• Review of final documentation / manufacturing data books.

Third part of NNB for the project Hinkley Point C, at different manufacturers, surveillance of procurement, manufacturing and NDT activities according standards (RCC-M,EN13445… ) of 4 steam generators and 1 reactor pressure vessel:INDUSTEEL: • Melting• Pouring• Chemical analysisFILAB: • Chemical analysisFRAMATOME (Le Creusot):• Forging• Heat treatment• Surveillance NDT (PT/MT/UT)• Dimensional/Visual• Marking / Traceability• Chemical analysis FRAMATOME (Saint-Marcel):• Monitoring of welding activities• Heat treatment• Surveillance of NDT (PT/MT/UT)• Dimensional/Visual examination• Dimensional inspection of important dimensions• Mapping• Chip sampling and chemical analysis• Final visual Training course: • RCC-M• Nuclear Pressure Equipment• P.E.D. Pressure Equipment Directive• Nuclear Pressure Equipment Regulation• NDT (PT,UT,MT,VT,DT)• Welding• Material

Monitoring manufacturing activities on 15 heat exchangers (Duplex steel) for 2 projects:-West Nile Delta project (BP)-Fadhili project (Aramco)• Responsible to carry out inspections according to Inspection and Test plan.• Ensuring welding activities are in accordance with welding book• Qualification of painting system• Painting inspection• Responsible for making inspection reports after each inspection and report non-conformances to the QS-Coordinator and/or the Project QA/QC manager.• Ensuring Supplier activities are performing according to project requirements• Raise punch for deviations and non-conformances and ensure punch closure by supplier when possible.• Checking traceability requirements on goods are in accordance with requirements.• Ensuring non-conformances are discovered during inspection, manage a non-conformance reports• Verifying the production schedule according to the progress requirements• Performing expediting activities as necessary and in cooperation with responsible Buyer.• Review of the content and compilation of the Manufacturing Data Book (MDB) during manufacture and on completion• Ensuring that all supplier documents, concession requests and non-conformance reports were accepted and closed-out prior to release.• Final Inspection, review and approval of Shipping Dossier and sign the Mechanical Completion Certificate to acknowledge that the Supplier has met all requirements and goods are accepted for shipment.• Monitoring of weighing, preservation and packing activities

On the shipyard “Harmony of the seas” (biggest cruise ship of the world), Saint-Nazaire, FranceQC inspector on the ship for piping inspection and validation with RCCL and DNV clients. All kind of pipes, pressured, water weight and functional test are done during the building of a ship. The supervisor duty is to apply the SOLAS and Client regulation on board. We are testing all kind of pipes. From PE (Polyethylene),PB (polybutene), copper, carbon steel, galvanized and stainless steel pipes. As quality inspector I had in charge more than 200 kms to inspect and to validated on behalf of the client-QC Supervision of installations and controls of pipes following the standards/requirements (carbon/stainless steel, PB/PE, I-fit, etc.)-Supervision / Attend to pressure tests (0,4 bars – 210 bars)-Cleaning of punch list

Mariner Topside Project (Statoil)Inspection on different packages in different places, different suppliers• Mechanical, instrumentation, piping inspection, checking the arrangement following the technical requirements of Statoil (access for maintenance / operation, supporting, materials installed properly and operates freely, etc).• Verifying of MCCR’s (Mechanical Completion Check Record), checking compliance of Statoil technical specifications.• Attend to testing (FAT).• Final inspection.• Preservation.Suppliers list:• DRESSER-RAND, Le Havre, France: 2 Gas Compressor Skids• FRAMO (Frank Møhn), Flatøy, Norway: 4 sea fire water lift pumps, 4 sea water pumps• K.LUND Offshore, Stavanger, Norway: 3 air compressors, 1 Emergency compressor, 1 Air dryer• IPG Fabrication, Sande, Norway: 3 (High capacity) centrifugal crude export pumps

At GE POWER CONVERSION, Champigneulles, France,PETRONAS LNG TRAIN 9 PROJECT, 3 motors 13MW (3600 rpm).-Progress manufacturing activities.-Attend to testing: Balancing, electrical, FAT, painting, final inspection, packing.

DUNKERQUE LNG PROJECTFire fighting system fueled by sea water (7 kms), glass reinforced epoxy (G.R.E.) from 4" to 24"•Performed QC supervision activities and QC project coordination meetings•Reception and control of the materials (piping/spool, valves, etc)•Quality management / traceability compliance•QC Supervision of installations and controls following the supplier requirements (no standard for GRE/GRP piping)•Supervision / Attend to pressure tests•Organizing meetings with different themes, such as quality, installation, control, etc•Coordinated quality control inspection.•Review of final documentation

•Monitoring activities, updated of traceability system for all activities performed (welding activities, bolt tensioning, etc)•Materials traceability (Piping, fitting, valve, check valve, etc)•Monitoring welders qualifications WPS and PQR•Management of welder qualification record and prorogation of welder qualification (EN287.1)•Final check of ISO piping, test package•Supervision of NDT and pressure test•Supervision of Task force•Commissioning (ICAPS)•Preparation of final documentation

Quality controler in manufacture of dismountable telecom shelter.Monitoring activities of all activities performed:•Reception / Control material•Welding activities•Supervision assembling•Dimensional checking•Final documentation

Olkiluoto project (EPR3)•Knowledge of technical environment •According to the PID, equipment’s implantation (Vessel, pump, compressor, etc)•According to the PID, tracing and arrangement of the piping as per standards and requirements on PDMS (technical, maintenance, economic)•According to the PID, implantation of instrumentations. •Pipe Pressure Drop Calculation•Design engineering development and drawings on AUTOCAD

•Knowledge and research of technical environment (Alstom training)•Documentary investigations•Adaptation, development and refurbishing studies of special machines (steam and gas Turbines, pumps, compressors, electrical motors, condenser)•Design engineering development and drawings on CATIA V5