Timo Bezuidenhoud Email & Phone Number

Perth, Western Australia, Australia

New Caledonia

Australia

• Carrapateena construction project for OZ Minerals• Leading hand depending on the requirement of the operation.• Connect columns, beams, and girders with bolts, following blueprints and instructions from supervisors.• Bolt aligned structural steel members in position for permanent riveting, bolting, or welding into place.• Fasten structural steel members to hoist cables, using chains, cables, or rope.o Cranes, hoists, or other moving or lifting equipment.• Force structural steel members into final positions, using turnbuckles, crowbars, jacks, or hand tools.• Verify vertical and horizontal alignment of structural steel members, using plumb bobs, laser equipment, transits, or levels.• Drive drift pins through rivet holes to align rivet holes in structural steel members with corresponding holes in previously• placed members.

Whyalla, South Australia

• Maintenance and shutdowns projects where based in the following locations:o BHP Billiton, Olympic Dam.o Onesteel, Whyalla.o South Middleback Ranges including but not limited to Iron Duke, Iron Barron and Iron Knob open cut mines.• Supervisor or Leading hand on some of the shutdown/maintenance, depending on the requirement of the operation.• Rigged and directed 50t to 300t crane on site to ensure a safe operation and no damage to equipment or material.• Operational conditions are extremely hot and included confined spaces and working at heights.• Operated a forklift, dingo skid steer, scissor lift, telehandler, bridge crane, and EWP.• Erect, maintain and dismantle scaffolds in accordance with code of practice and regulations• Housekeeping and tidiness are an essential part job on site.• Work done on the following high-risk facilities but not limited to: Crusher, Screening Plant, Coke oven, Treadwell, Pellet Plant, Rolling Mill, Electric furnace, Flash furnace, Blast furnace and Anode.

Adelaide, Australia

• Maintenance, shutdown and commercial construction projects where based in the following locations:o BHP Billiton, Olympic Dam.o OZ Minerals, Prominent Hill – underground and aboveground.o Nyrstar, Port Pirie.o New Royal Adelaide Hospital, Adelaide.o Coleman Rail (bridge expansion), Port Adelaide.• At Olympic Dam I was trained to be Job Owner, Working at Heights Supervisor and Leading Hand.• Operated a forklift, skid steer, telehandler, bridge crane, and EWP• Erect, maintain and dismantle scaffolds in accordance with code of practice and regulations.• Maintaining fall protection requirements while erecting / dismantling scaffolds.• Erect and dismantle Cantilevered hoists to maximum working load not exceeding 500kg• Safety nets, static lines, and use of rope / knots and gin wheel• Providing a scaffold to the user that is free from recognizable and preventable hazards (i.e. fall protection systems in place,falling object prevention in place, appropriate access / egress to and from the scaffold, appropriate anchorage and stability ofthe structure, appropriate walking / working surfaces, maintaining appropriate clearances from electrical hazards, etc.)

Adelaide, Australia

• Subcontracted by Synaco Global Recruitment to the client.• Connect columns, beams, and girders with bolts, following blueprints and instructions from supervisors.• Bolt aligned structural steel members in position for permanent riveting, bolting, or welding into place.• Fasten structural steel members to hoist cables, using chains, cables, or rope.o Cranes, hoists, or other moving or lifting equipment.• Force structural steel members into final positions, using turnbuckles, crowbars, jacks, or hand tools.• Verify vertical and horizontal alignment of structural steel members, using plumb bobs, laser equipment, transits, or levels.• Drive drift pins through rivet holes to align rivet holes in structural steel members with corresponding holes in previously• placed members.

Roxy Downs

• Maintenance and shutdown projects based at BHP Billiton, Olympic Dam in the processing plant and smelter areas.• Rigging loads to machinery to move them from one place to another.• Attach pulleys and blocks to fixed overhead structures such as beams, ceilings, and gin pole booms, using bolts and clamps.• Manipulate rigging lines, hoists, and pulling gear to move or support materials such as heavy equipment and parts.• Signal or verbally direct workers engaged in hoisting and moving loads, to ensure safety of workers and materials.• Select gear such as cables, pulleys, and winches, per load weights and sizes, facilities, and work schedules.• Tilt, dip, and turn suspended loads to manoeuvre around obstacles, using multi-point suspension techniques.• Demonstrated the ability to work with high pressure hydraulic and pneumatic torque wrenches.• Successfully torqued over 80 structural bolts on the Svedala mill to a certain longitudinal length

Orange, New Sourth Wales

• Shutdown projects was based at Evolution Mining, Lake Cowal and Newcrest, Cadia Valley.• Mill liners was replaced that are designed as sacrificial linings to protect the shell in both Sag and Ball Mill.• Worked was done within a confined space, in close proximity mill relining machine that has 8 axes of movement.• The task included the rigging the liners to the mill relining machine for removal and installation.• Demonstrated the ability to work with the Thunderbolt pneumatic recoilless hammer and torque wrenches.• Torqued and retorqued over 1000 bolt per mill shutdown.• Massive amount physical and metal capability is need during a mill reline

Whyalla, South Australia

Associated with Arrium LtdTo deliver to accurate and timely engineering records services whilst ensuring quality output and governance over the Engineering Records system.Update and maintain the Engineering Records system including but not limited to drawings, sketches, technical specifications, scopes of work, engineering calculations, risk analysis and reports stored as electronic and hardcopy.Register all new engineering records into the Records system.Manage the department's mailbox and notification centre.Provide printing and scanning services to the plant.Follow up drawing reviews and approvals with plant personnel.Control quality documents to ensure ISO9000 accreditation is maintained.

Johannesburg Area, South Africa

Associated with Planair Enterprises Ltd.Managed all operational communication and disseminate operational information as required to all appropriate parties.Liaise with, and provide appropriate flight documentation to internal and external parties to facilitate line operations.Administer and disseminate flight schedules in consultation with Management.Assisted in scheduling and administer flight and cabin crew rosters to ensure flights are appropriately crewed.Book flights, hotels and transport for operational crew.Compilation, storage, processing records, crew documentation and administrative records as required by legislation.Assisted with creating and processing of manual revisions and quality control document and the distribution thereof.Flight operational duties included; planning, preparation, following and tracking of flights to insure safe operation.Worked flexi hours and standby duty beyond normal office hours.

Johannesburg Area, South Africa

Associated with Air Rescue Africa and International SOS LtdFlight preparation included quoting clients on complex rescue missions considering all variables for an accurate estimation, quotes exceeded $130,000 per mission.Dispatching missions, ensuring a 2 hour deadline was achieved from activation to take-off. Duties included creating and filing the necessary flight plans and documentation, fuelling and towing aircraft, pilot briefings and weather analysis.Flight following and tracking was an essential part of duties, ensuring flight and duty requirements are met for a safe operations.Communicated all emergencies, delays or diversion due to weather and airport closures to clients.Collaborated with third-party countries to obtain flight clearances for rescue missions.Receiving patient, client and crew on apron and administering debrief to all government departments.Post flight documents and records register to data base and maintenance thereof in accordance to aviation standards.Analysed statistic for monthly performance review meeting with company board members, continually improving operations to maintain highest service level.

Johannesburg Area, South Africa

Licence, High Risk Work

• Licence to perform scaffolding advance level (SA) (CPCCLSF4001A) • Licence to perform scaffolding intermediate level (SI) (CPCCLSF3001A).

High Risk Work, Resources And Infrastructure (Rii20109)

• High risk licence to erect, alter and dismantle scaffolding basic level (SB) (CPCCLSF2001A) • High risk licence to operate a boom-type.

Certificate, Asbestos Removal

• Asbestos identification and awareness. • Remove non-friable asbestos (CPCCDE3014A) • Remove friable asbestos (CPCCDE3015A

Private Pilot License, Aviation/Airway Management And Operations, Ppl

Activities and Societies: Flying Club The social nature of the club allows for flying events where pilots can hone their skills.