工 作 描 述:unios 公司是主要产品LED商业照明，澳洲公司在中山设立办事处。目前公司有自己的试验室。我负责工程师和品质管理管理工作（工程部,品质部,统称工程部为一个部门）目前提升为高级主管职位。1.公司的产品，筒灯，投光灯，橱柜灯，楼梯灯，灯带，线条灯，植物灯，车库灯，户外灯,轨道灯，三防灯应急灯，工矿灯。（IPXX系列地埋灯，花园灯等等）2..产品加工工艺了解透彻，线切割，冲压，注塑，旋压，喷漆，电镀，灯饰工艺非常熟量3.对产品LED产品结构优化和驱动LED的芯片配备和寿命测试。4.产品的安全性测试（公司有自己的实验室，盐雾测试-积分球-光分布测试-雷击浪涌-EMC测试等等）5.经过检验完成,我们应当采取一些照片关于产品,测试和缺陷,必须与工厂确认检验发现,告诉工厂检验结果。(如果有必要,我们可以给工厂一些好的建议关于如何正确的问题), 6.我负责灯饰工厂的品质系统，IOS的建立，TUV，3C认证，SAA认证。工厂IPQC,OQC，QA，IQC，文件建立品质标准。7. 驱动厂品质工作，检验标准的建立和完善，驱动静电设备等…8.管理外发QC工作的文件标准化建立，因为我们大部分产品外发工厂加工，外发QC的管理和品质标准工作10. 外发工厂的评估工作，品质提升和下降进行合理化程序。11.负责和运营部门一起对国内工程订单品质跟踪，主要是酒店工程。 12.最后统计不良品写检验报告:当产品检验完成后,我们必须用英语写报告和照片插入报告,最后我们需要发送报告给客户和我们公司.Job description: unios is the main product of LED commercial lighting. The Australian company has set up an office in zhongshan.At present, the company has its own laboratory.I am responsible for engineering and quality management (engineering department, quality department, collectively engineering department as a department) and am currently promoted to a senior executive position.1. The company's products, down lights, projection lights, light belt, line lights, plant lights, garage lights, outdoor lights, track lights, emergency lights, three anti lights, mine lights.(IP...series buried lights, garden lights, etc.)2.Product processing process understanding, line cutting, stamping, injection molding, spinning, painting, electroplating, lighting process is very familiar3. Optimized the LED product structure, equipped and tested the chip driving LED.4. Safety testing of products (the company has its own laboratory, such as salt spray test -- integrating sphere light distribution test -- lightning surge -- EMC test, etc.)5. After the inspection is completed, we should take some photos about the products, tests and defects, must confirm with the factory the inspection findings, tell the factory the inspection results.If necessary, we can give the factory some good advice on how to do it right.

Company Brief: Company is a German company, mainly for commercial lighting, the company office in zhongshan henglan factory set up an office.Main products include down lights, installation lights, stair lights, outdoor lights (IPXX series street lights, garden lights, floor plug lights, line lights, flat lights, strip lights, track lights...Mainly focus on QE and QC, negotiate with related department to prompt new samples, and source new suppliers. Work with QC department to achieve high quality of product. Work with supplier to master the capacity and schedule so as to all shipment could be ontime.Details as following.*Seal sample approval, find reliable solution to solve the designed weakness of new product, in charge of the safety testing for all articles. *Response to customer’s inspection card and translate it to factory.*Arrange inspection; solve the technical issues with supplier as per customer’s requirements. Provide training for suppliers for the quality issues.*Follow up production; work with shipping Dept. so as to cargos could be shipped on time. *Make quality standard for all inspectors to ensure customer is satisfied with the quality of products*Analyze and investigate the abnormal quality issue, and then to solve it so as to no complains.*Familiar with the structure, design and safety of the product, receive the mail order from the company, make the sample, confirm the sample, arrange the structure and safety and factory to solve the quality and design structure problems. 工 作 描 述:*公司是一家德国公司，主要是商业照明，公司办事处在中山横栏工厂里设了办公室。主要产品包括筒灯，设灯，楼梯灯，户外灯（IPXX系列 路灯，花园灯，地插灯，线条灯，平板灯，灯带，轨道灯。。。。监管QC组在工厂层面的质量控制与最终验货。*帮助供应商去持续提高产品质量与生产工艺。*检验新样品，确认新产品的规格与生产工艺，建立品质标准。*提高与完善产品的包装，各种安全测试并进行试摔测试。 *寻找新供应商并评估其产能等。*对新员工进行培训。*熟悉产品的结构、设计和安规打样确认。

Company Brief: Company is a German company, mainly for commercial lighting, the company office in zhongshan henglan factory set up an office.Main products include down lights, installation lights, stair lights, outdoor lights (IPXX series street lights, garden lights, floor plug lights, line lights, flat lights, strip lights, track lights...Mainly focus on QE and QC, negotiate with related department to prompt new samples, and source new suppliers. Work with QC department to achieve high quality of product. Work with supplier to master the capacity and schedule so as to all shipment could be ontime.Details as following.*Seal sample approval, find reliable solution to solve the designed weakness of new product, in charge of the safety testing for all articles. *Response to customer’s inspection card and translate it to factory.*Arrange inspection; solve the technical issues with supplier as per customer’s requirements. Provide training for suppliers for the quality issues.*Follow up production; work with shipping Dept. so as to cargos could be shipped on time. *Make quality standard for all inspectors to ensure customer is satisfied with the quality of products*Analyze and investigate the abnormal quality issue, and then to solve it so as to no complains.*Familiar with the structure, design and safety of the product, receive the mail order from the company, make the sample, confirm the sample, arrange the structure and safety and factory to solve the quality and design structure problems. 工 作 描 述:*公司是一家德国公司，主要是商业照明，公司办事处在中山横栏工厂里设了办公室。主要产品包括筒灯，设灯，楼梯灯，户外灯（IPXX系列 路灯，花园灯，地插灯，线条灯，平板灯，灯带，轨道灯。。。。监管QC组在工厂层面的质量控制与最终验货。*帮助供应商去持续提高产品质量与生产工艺。*检验新样品，确认新产品的规格与生产工艺，建立品质标准。*提高与完善产品的包装，各种安全测试并进行试摔测试。 *寻找新供应商并评估其产能等。*对新员工进行培训。*熟悉产品的结构、设计和安规打样确认。

About us: we are the agent of TRIO, a German company specializing in lighting and furniture. They are Taiwanese businessmen and are ranked 4th in Germany.(household lamp, table lamp, floor lamp, chandelier, garden lamp, installation lamp, ceiling lamp...)Job description: in 1997, the company had 3 employees, business, boss, and engineering quality. I was responsible for engineering quality and the efforts of 3 colleagues for more than 1 year. The company set up a factory in dongguan in 1998. struggle of 3 colleagues. The company set up a factory in dongguan in 2018.1. Arrange inspection schedule and submit to relevant departments. 2. Review and confirm pre-production samples.3. Prepare product specifications and set up corresponding product database.4. Conduct intermediate inspection and final product inspection..5. Solve the problems found in interim inspection and final product inspection on site.6.PreparEmployee training plant,7. ISO system setup and management.e initial inspection criteria.8.Optimization of product process and structure.公 司 介 绍：公司为德国TRIO客人代理,主要产品为灯具和家具,他们是一家台商企业，在德国是排名第4位的位置。（家用灯饰，台灯，落地灯，吊灯，花园灯，设灯，天花灯。。。）工 作 描 ：1997年公司3个人，业务，老板，工程品质，我负责工程品质，3位同事的1年多的奋斗，公司在1998年在东莞成立工厂，灯饰生产部门，灯饰生产车间，都是我在负责目前职位品质技术品质主管。*跟进大货生产与交期。1.安排验货排程并提交给相关部门。 2.审查与确认产前样。3.准备产品的规格书并建立相应的产品数据库。4.进行中期的验货与最终的成品验货。.5.现场解决中期验货与最终成品验货中发现的问题。6.准备初始的验货标准。7.员工的培训工厂，ISO系统的建立和管理。8.产品工艺的优化和结构的优化。