1. 100% compliance with all safety and environmental regulations.2. Follow up on Improvement actions and closing to 80 % per month.3. Work Permit compliance of SIE factory and report submission monthly.4. Decrease in near-miss incidents reported by 30 % over six months.5. Conduct monthly safety inspection with a 90 % follow-up on identified issues.6. Achieve a 15% reduction in environmental incidents and spills annually.7. 100% completion rate of mandatory safety training for all employees.8. Safety Talks of all departments as per schedule.9. Conduct at least two emergency response drills per year.10. At least one classroom training of Factory staff as per schedule.11. Firefighting training of Factory Staff One Practical Training / 3 months.12. Complete Documentation for ISO Audit and keep it update.13. Complete root cause analysis for 100% of reported incidents within two weeks.14. Reduce in total recordable incident rate by 20 % annually.15. Implementation of at least three new safety initiatives or programs per year.16. Increase in safety-related suggestions and feedback from employees by 40% over the next year.Milestones: 1. Achieve a 25% improvement in safety audit scores annually.2. Update and distribute the emergency response plan annually.3. Conduct quarterly safety drills and training sessions.4. Implement a safety reward and recognition program by the end of the quarter.5. Implement a new waste reduction and recycling program by the end of the year.6. Implement corrective actions for all incidents within one month of investigation completion.7. Zero lost-time injuries (LTIs) within the next quarter.8. Achieve a 50% reduction in workplace accidents within the next year.

 Daily safety round of site to identify the hazards, unsafe condition and act. Ensure that all activities are going in accordance with the safety procedures. Provide prevocational training and on-the-job training for employees by dissemination safety publications, instructions, rules, posters, etc. Initiate immediate stoppage of any operation or act could cause death, injury or extensive damage to property, and notify all conceded and involved personnel. Prepare and submit inspection reports, investigation and studies causes, and recommend corrective measures for decreasing their frequency and for preventing recurrences. Conduct regular safety toolbox meeting for working safety awareness amongst workers. Closely monitor all type of erection activities, scaffolding work, crane work, welding work, etc. Conduct daily routine inspection to site employee, observe all safety rules and regulations, and takes necessary action to obtain compliance with all safety policies. Establishing and maintaining a professional relationship with Company’s Contractor and Sub-contractor’s HSE Personnel. Managing and supervise the Orientation, Structural safety talks, specific crafts wise HSE training and safe work trainings of employees. Communications and statistics to HSE Head & Attending HSE meetings. Conduct safety trainings for workforce. Inspection of PPEs & Inspection of work site through different checklists. Supervising all inspections and maintenance of firefighting equipment and Fire Alarm system. Coordinating emergency evacuation drills at work site. Implementation of procedures for Cold, Hot, confined Space Entry, Excavation permit and ensure compliance. Incident / Accident investigation, reporting and follow up at site. Monitoring and implement Fire and Explosion prevention measures. Disposal of effluents, solid wastes and Hazards Material. Best 5S Auditor 2015.  Perform other related duties as may be required or assigned by HSE HOD.

PTW CoordinatorPICWS (Person In charge of Work Site)Adhere to all GASCO safety policies, procedures, and standards.Ensure compliance with Abu Dhabi and UAE safety regulations and laws.Maintain confidentiality and integrity in all safety-related activities.Promote a proactive safety culture within the organization.Report any unsafe conditions or practices immediately to the relevant authorities.*Rules and Responsibilities of a Permit Receiver at GASCO Abu Dhabi*Assist in the development and enforcement of GASCO’s safety policies and procedures.Compliance MonitoringSafety Inspections and AuditsEmergency PreparednessPolicy ImplementationSafety Equipment Management*Understand and strictly comply with all GASCO permit-to-work (PTW) procedures and requirements*Ensure all permits are valid and correctly completed before starting any work.Maintain clear and open communication with all relevant parties during the work process.Adhere to all safety instructions and protocols outlined in the permit.Report any discrepancies or unsafe conditions immediately.Permit ApplicationPre-Work AssessmentCoordination and CommunicationWork ExecutionHazard ControlEnsure all personnel involved are aware of and adhere to the control measures.Permit ClosureDocumentationMaintain accurate records of all permits received and the status of the associated work.Ensure all documentation is up-to-date and accessible for review.Safety Inspections and AuditsBy following these rules and fulfilling these responsibilities, both the Safety Officer and the Permit Receiver at GASCO Abu Dhabi can significantly contribute to maintaining a safe and compliant work environment.Risk Assessment:Training and Education:Emergency Preparedness:Policy Implementation:Compliance Monitoring:Safety Equipment Management:

HSE Policy ImplementationSafety InspectionsGive TBT, HSE education and training of Emergency PreparednessCompliance MonitoringDocumentation and ReportingContractor Management Stakeholder Communication

• Implementing site HSE plans including Environment & Community protection Plan, Tools & EquipmentInspection Protocols, Emergency Response plans, Environmental Management Plans etc. • Ensuring 100% Staff site safety Orientation & Equipment inspections. • Ensures compliance to all regulations on Occupational Health, Safety and Hygiene Plans, implements, inspect and conduct audits related to fire-fighting and other similar systems. • Implementation of Permit to Work System and other procedures at project sites. • Corrective action/pre-cautionary measures to be taken at site to achieve safe work progress and to maintain as far as practically low risk involvement in construction activity. • Coordination regarding safety activities with the subcontractor and other individual contractor who may be working on site. • Reviews company procedures to ensure compliance with safety related policies and procedures, updates existing regulations and recommends amendments as necessary to cope with the modified international standards. • Selection of the technical specification of fire fighting equipments as foam stations, monitors, automatic fire, heat, & gas detection system, vehicles, extinguishers & hydrants according to NFPA (National Fire Protection Association). • Inspection of Foam Sprinkler System for Furnace oil tanks according to NFPA. • Daily routine visit of plant and monitoring of Safety Activities and Environmental Issues rose and highlights unsafe condition and acts. • Monthly prepare HSE Bulletins, issue HSE Flyer against incidents/ accidents. • Participates in the Hazardous Area Classification. • Maintained MSDS of chemicals and other substances hazardous to health, which may lead to unsafe working conditions and environment. • Ensure the Fire and Safety Equipments throughout the plant are kept in best working condition through monthly inspection and preventive maintenance program.

4 years experience in Chemical fields and manufacturing areas as a HSE Inspector and Trainer. • Give Fire Fighting Training. • Give Safety Induction to New Workers. • Enter the Record Safety Induction in Data Base & Manually. • Follow up permit system where appropriate. • Enforces the use of PPEs. • Organize and monitor the reconditioning, installation and maintenance of fire-fighting equipments 􀀀 Fire Hydrants 􀀀 Fix Monitors 􀀀 Fire Extinguishers 􀀀 Fire Foam Cabinets 􀀀 Mobile Foam units, 􀀀 High Expansion Foam Generators 􀀀 SCBA 􀀀 Eye & emergency Showers 􀀀 Spill Control Stations 􀀀 First Aid Boxes, 􀀀 Scaffolding & Mobile folding Tower• Preparation of daily & Weekly Reports According to the Requirement of Management. • Participate in HSE Committee and Perform as an Active Member • Assessing the Performance of HSE Inspector. • Assisting in HSE Training Matters as Requested by HSES Manager. • Chief Executive’s HSE Initiative Award-2009

• To Procure Best Quality of Material economically (Lowest Cost) within stipulated Delivery Period. • To Maintain Uninterrupted Flow of material to support the development schedules. • To Develop New Vendor and maintain good Buyer-Seller relationship. • To promote source development. • To provide necessary information to curators & education officer regarding availability of good quality material in the market, supplier's capability & performance etc.• To maintain credibility in the market by fair dealing. • Daily routine works I.e. Negotiation with supplier, placement of order, full-up, tracking material etc. • Locate the genuine source for each item. • Procure Technical (Mechanical & Electrical spares, Electronics/plumbing/auto parts and Instruments), General items, consumables and Packing materials at competitive prices. • Explore the market and develop Vendors and procure quality items. • Maintain all the record of procured items up to date. • Maintain data in SAP. (Some Training Required) • Managing inbound consignments by ensuring timely pick-ups of items from suppliers. • Cataloging received items and approving them for delivery after quality inspection • Visit, Evaluate and select the adequate suppliers and assist the buyer in the decision of the terms and condition. • Web surfing/Searching. • To use market Competition Data to constantly improve the plans and performance of the company. • To manage correspondence (Emails, Faxes, Mails, Telephone calls). • Accounting and Bookkeeping Skills • Knowledge of Inventory Management Process • Able to use email and web based applications • Strong negotiating skills • Flexible in traveling • Knowledge of assortment on the given purchase field • Proactive approach • Computer Literate in MS Office, E-mail Software, Good Typing Speed Good Communication Skills

• Data entry of goods receipt into the system • Maintaining and updating stock inventory records and location of goods. • Handling inventory management • Generating purchase orders and goods received notes • Assisting email and message taking • Communicating daily orders to different suppliers for short stock items • Web surfing/Searching. • Preparation of offers / Bidding documents. • Follow up with customers for concluding business. • Obtaining orders. • Travelling to other cities for business. • Also be responsible for all Office related tasks. • Maintenance of Accounts, Records, Filing, Office maintenance in the Director's absence. • Arrangements for meetings with clients. • Must be proficient in MS Office. E-mail software.