Alexandre Drouin Email & Phone Number

Mirabel, Québec, Canada

Mirabel, Québec, Canada

• Created and executed Certification and Engineering test plans and test reports.• Managed the schedule of the Lion6 Amazon prototypes to coordinate the access to the vehicles with the different engineering groups involved in the development of the project.• Assigned as the main Test & Certification engineer in a multi-disciplinary team during the development and certification of the Advanced Driver-Assistance System.• Achieved the goal set to complete the certification of the Lion6 truck including the integration of the Advanced-Driver Assistance System.

Région De Montréal, Canada

• Supported hardware and software integration of Flight Controls Systems for pilot’s controllers and aircraft controls surfaces on flight simulators for Boeing 757 and 767 programs.• Assigned as the main Flight Controls Systems Specialist on Boeing 757 and 767 flight simulators programs during the whole development process.

Montreal, Canada Area

Contributed to the development and the certification efforts, as a Stability and Control point of view, of the CSeries (for 5.5 years) and the Global 5500/6500/7500 (for 1.5 years), with the following actions:Desktop Simulation Analysis • Evaluated aircraft’s behaviour when introducing a perturbation (ex: wind) or a failure (ex: engine loss) using Desktop Simulation analysis. • Created PID controllers to simulate pilot’s reaction to a perturbation before using it into the desktop simulation analysis. • Completed various projects and performed S&C analysis simultaneously and within very short deadlines.Support Flight Simulator Testing / Flight Testing • Provided the procedures and the maneuvers to be flown, as well as the aircraft configuration for the Flight Simulator testing and the Flight testing. • Configured aircraft load conditions, flight conditions and injected failures when needed. • Reviewed the recorded data to ensure that the maneuvers were flown as described in the procedure and that the aircraft is always stable and controllable. Documentation and Certification • Regrouped data from Desktop Simulations and/or flight simulator testing/Flight testing to show the behaviour of the aircraft in presence of perturbations. • Developed and presented official internal documentations for Bombardier Aerospace and Certification, to Flight Authorities such as Transport Canada, EASA and FAA.

Montreal, Canada Area

• Created a Catia to VBA to Matlab loop, to obtain the most optimal sequence of fuel burning in order to keep the center of gravity of the aircraft constant during a mission. • This loop was added to the Multi-disciplinary Design Optimization (MDO) tool from Advanced Design Group, helping to determine the position and the size of fuel tanks for future projects.

Montreal, Canada Area

• Created a structured mesh (blocking) of high quality in ICEM for a Blended Wing Body (BWB) prototype.• Conducted aerodynamic analysis in FLUENT based on the high-quality mesh of the BWB prototype.• Demonstrated accurate aerodynamic results and validated Master’s degree research project. • Supported Bachelor students as a Lecturer in a course on Heat and Mass Transfer.

Quebec, Canada

• Created a Matlab process that calculates the working area of a structure for which the corners are linked with cables. The objective is to display the launching area for specific cable length and find optimal cables length to increase the working area. • Designed and assembled an emergency stopping system mounted on a travelling crane and a passive balancing system for the modernization of the General Motors plant. • 'General Motors Research’ has copyrighted both projects and aims to adapt them to their own facilities.

• Contributed to the design of an Autonomous Underwater Vehicle (AUV)• Participated, as a first year competitor, to a contest against many Canadians and Americans University. Our objective was to autonomously realize the first of a series of tasks, which was achieved.

Master'S Degree, Aerospace Engineering

Specialization: Aerodynamic and jet propulsion

Bachelor'S Degree, Mechanical Engineering

Specialization: Aeronautic and space sciences