Abu Dhabi Luxury Island

May 2021 to Jun 2023Etihad Rail Marine Works (US$136.9M) & Shamal marine development Project (US$353.2M) – AD Ports – Construction Manager, Khalifa Port – Abu DhabiAbu Dhabi Ports and Etihad Rail have agreed to develop a rail facility within Khalifa Port that will be linked to the national Rail network. Main objective of the ERP project is dredging and reclamation, revetment removal and constructing 3230m long revetment.The objective of the Shamal Project is to construct marine facilities including 1200m quay wall, 3522m breakwater and 2200m revetment and 1800m old revetment removal. Main duties but not limited to, • Oversee all the construction activities. • Monitoring and updating the day-to-day construction progress of dredging, reclamation, Old revetment removal, new revetment and breakwater.Apr 2020 – Apr 2021Al Fiyay Marine Facility Project (US$14.9M) – AD Ports – Area Construction Manager, Al Fiyay Island – Abu DhabiMain objective of this project is to design and construct a Marine Facility on Al Fiyay Island including dredging of an entrance channel, Causeway to provide pedestrian and vehicle access, Breakwater, Pontoon system, Slipway for small craft vessels, Landing craft ramp, Navigational aids, Firefighting system and Solar powered lighting. the following main elements, Dec 2018 – Mar 2020Delma port marine works-North (US$12.2M) – AD Ports – Area Construction Manager, Delma Island – Abu DhabiMain objective of this project is to build 340LM quay wall and 220LM breakwater. Main duties but not limited to, • Monitoring and updating the day-to-day construction progress of dredging, sheet pile and breakwater, revetment, road works, street lighting and water network activities• Prepare and submit daily construction progress report to management team.• Certifying the completed work activities progress (%) submitted by the contractor in accordance with actual work completed at site

Jan 2018 – Jul 2018 Reclamation remedial works (US$9.9M) – PMC/AD Ports – Project Engineer (Special projects), Khalifa port – Abu DhabiWithin the newly reclaimed P7&P8 area, it has been determined that there are around 2.1million Cu.M volume of silt/unsuitable material to be removed and either stockpile/segregated or pumped out in the designated disposal area. Around 240,000 m2 area shall be dredged up to -8.0m LAT by using two cutter suction dredgers, because of less time duration to handover to end user COSCO to start their operation. After segregation, material shall be backfilled to design level +4.5mLAT in the dredged areas. Duties,• Monitor, supervise and ensure that all the stages of dredging, reclamation and dry filling activities is being carried out safely at construction site without rework and coordinate with various aspects of project specification including inspections, soil sampling & testing and maintaining centralized filing of all test reports.Mar 2016 to Dec 2017 Sir Bani Yas Cruise Beach (US$14.2M) – PMC/AD Ports – Project Engineer (Special projects), SBY island – Abu DhabiThe main objective of this project is to establish a beach destination resort that can be utilized by the Cruise Lines visiting Abu Dhabi. Duties, • Responsible for the construction of Marine Works-Jetty/groins/revetment/causeway, shade structure works including welcome centre, buffet& dining facilities, bars, transportation area, toilets & changing facilities, staff facilities etc., utilities & structures, revetment structure, Land bridge from resort to Main Island.Jan 2015 – Feb 2016 Cruise Terminal (US$47.2M) – PMC/AD Ports – Project Engineer (Special projects) – Abu DhabiConversion of a Cargo shed to 7800m2 of 5star Cruise Terminal with mezzanine floor in 11months. Project was fast tracked and value engineered. So, the entire cruise season could be operated by AD Ports. Executed the projects and services consistent with the quality and safety objectives.

6. GROUPIII BASE OIL PRODUCTION FACILITY PROJECT(LBO-5574 TAKREER)6.1 Daily reporting about progress, non compliance, delay in work to the Project Manager. Conducting regular job site inspections.Assist in the quality and safety audit and necessary project documentation.Monitor, evaluate and ensure that all work is being carried out safely.Identify and report technical queries to field engineering. 6.2 PIPE RACK FOUNDATIONSConstruction of foundations for Base oil unit Piperack, Interconnection Piperack, equipment structure Piperack6.3 BUILDINGSConstruction of Substation buildings SS900, SS901, SS902 & SS903, Workshop building WS001, Satellite instrument shelter SIS-19, 20&21.6.4 TANKSConstruction of Concrete ring wall foundation.Backfilling inside ring walls.HDPE leak detection pipe1”,HDPE liner 2mm thick installation6.5 EQUIPMENT FOUNDATIONSConstruction of transformer rectifier foundation6.6 PIPE FOUNDATIONConstruction of platform foundations, pipe supports & pipe sleeper foundations.6.7 UNDER GROUND FOUNDATIONConstruction of Electrical/Instrument duct banks, RC trenches, RC box culverts, RC pipe trenches.6.8 STORMWATER/BOX CULVERT FOUNDATIONConstruction of storm water ditches, RC concrete pipes, RC storm catch basins, RC sand traps, soak-away pit.6.9 OILY SEWER/SANITARY SEWER FOUNDATIONConstruction of OILY water storage pit, manhole and valve pits.6.10 GRE PIPES & FITTINGS INSTALLATIONConstruction of GRE pipes varies from Ф50mm to Ф400mm for accidentally oily water system.6.11 BUND WALLConstruction of earthen bund wall with slope liner concrete.6.12 STEEL STRUCTURE Steel structure erection and alignment6.13 Asphalt road worksConstruction of Asphalt road 6.14 Painting worksEnsure the quality of works in all stages of Painting works (above ground storage steel tank, steel structure and piping) i.e. Surface preparation and painting application works as per applicable standards and specifications.

Project : Isomerate Quality Improvement project-5625 Client : Abudhabi Oil Refining Company(Takreer)Position held : Third Party Inspector-Civil.(PMC)Job Responsibility:• All Field Inspection and Co-ordination of inspection activities to ensure the quality requirements in the contract are met.• Review/approval of all inspection reports and the maintenance of the centralized filing of inspection reports. • Ensuring that the inspection and test procedures are adhered to Project specification and standards.• Coordinating inspections and test with field inspectors/Engineers and Subcontractors.• Co-ordinate the witness of inspections and test with the Consultant/Client.• Attended the auditing of quality systems & documentation in construction sites.• Submitting Handing over final Dozer to client for completion certification.• Inspections of material delivery as per approved quality plans and as per contract requirements.The main scope have included but not limited to:1. TEMPORARY FACILITIES:• Fixing Temporary fencing around the work area(around 400LM)• Construction of Site office/dining/store/toilet facilities• Survey markings of all working boundary area2. Construction of foundations for utility Pipe rack3. Construction of foundations for cooler Pipe rack4. Construction of equipment foundations like naphtha splitter, light naphtha storage drum, LP condensate drum, Backwash material collection drum, Closed blow Down drum,5. Construction of pump foundations for feed and discharge6. Hard landscaping(curbstone laying)-500LM7. Construction of Electrical and instrumentation duct banks and cable trenches8. Construction of concrete paving.9. Construction of concrete ditches with sand trap.10. Construction of Asphalt road with 150mm thick subbase,70mm thick wearing course and 30mm thick wearing course with tack coat and seal coat-250LM(road width-8.0m)

Project : Al Ray an Security Complex ProjectOwner : Ministry of Interior(Qatar)Job Responsibility:• Responsible for 05 site Engineers, 12 supervisors and 456 workers • Quantity Surveying• QA/QC coordination• Planning and Schedule making.• Executing the work as per drawings.• Preparation of BOQ• Know, understand, Apply and enforce all safety rules, regulations and precautions pertaining to work. • To conduct regular tool box meeting to all work crew to high light their responsibility and Job related hazards. • Ensure the proper usage of PPE at site.• Regular co-ordination with QC department for daily inspections.• Monthly work progress Inspection with management and client. • Maintain good housekeeping at site.• Attend daily Construction co-ordination and Safety meeting.• PTW co-ordination and Implementation at site for Construction, Pre-commissioning and commissioning work. • Regular co-ordination with safety department on day to day activity.• Coordinate with Client and Sub contractors in all effective implementation of jobs.• Effective utilization of resources.• Site documentation works.• Set an example.The main scope have included but not limited to:1. TEMPORARY FACILITIES:• Fixing Temporary fencing around the work area(around 760LM)• Construction of Site office/dining/store/toilet facilities• Survey markings of all working boundary area2. Construction of Boundary wall of height 2.75m from FFL with grooves and architectural features.3. Hard landscaping(interlocks in the pathways)-6622Sq.M4. Hard landscaping(curbstone laying)-3709LM5. Construction of Asphalt road with 150mm thick subbase,70mm thick wearing course and 30mm thick wearing course with tack coat and seal coat-6911LM(road width-8.0m)6. Construction of 09 buildings (1no.-basement+ground+first, 2no.s-ground+first, 06no.s-ground) of height varies from 4.40m to 12.95m.

Project : Fujairah Terminal Expansion Project(FTEP) Owner : Fujairah Refinery Company Limited(FRCL)Main Contractor : Audex PTE LTD-Singapore.Job Responsibility:• Responsible for 05 Supervisors and 195 workers.• Quantity Surveying• QA/QC coordination• Planning and Schedule making.• Executing the work as per drawings.• Preparation of BOQ• Know, understand, Apply and enforce all safety rules, regulations and precautions pertaining to work. • To conduct regular tool box meeting to all work crew to high light their responsibility and Job related hazards. • Ensure the proper usage of PPE at site.• Regular co-ordination with QC department for daily inspections.• Monthly work progress Inspection with management and client. • Attend daily Construction co-ordination and Safety meeting.• Coordinate with Client and Sub contractors in all effective implementation of jobs. SCOPE OF WORKS IN FTEP :1.AREA PREPERATION:• Backfilling the topsoil removed area by layer by layer after doing initial compaction (120,000Sq.M Area )2.Construction of Tank foundation Pad(earth filling by layer by layer up to a height of 1.80m with installation of HDPE leak detection pipe,HDPE liner installation, Oil sand filling dia of tank pad varies from 26.0m to 57.00m).3.Construction of Bund wall of Height 1.8,1.4,1.20m from FGL4.Construction of Valve manifolds and pump stations5.Construction of Fire fighting shed6.Pipe sleepers and pipe support foundations, platform foundations7.Construction of Valve manifold foundation and Pump station foundation8.Construction of Generator room and Substation building 9.Construction of Concrete pipe rack and Pipe bridge foundations around 425m long10.Construction of Storm water drain, road crossing, Cable trenches.11.Construction of HDPE pipes varies from Ф75mm to Ф400mm for oily water system with fusion welding and socket welding connection of pipe and fittings.

Project : R-405 Diftah-Shis Road. Box Culverts and Tunnel ProjectOwner : Sharjah MunicipalityMain Contractor : Hal crow International Partnership, Sharjah.Job Responsibility:• Responsible for 02 Supervisors and 78 workers.• Quantity Surveying• Planning and Schedule making.• QC documents preparation and coordination with consultant• Executing the work as per drawings.• Preparation of BOQ• Know, understand, Apply and enforce all safety rules, regulations and precautions pertaining to work. • To conduct regular tool box meeting to all work crew to high light their responsibility and Job related hazards. • Ensure the proper usage of PPE at site.• Regular co-ordination with QC department for daily inspections.• Monthly work progress Inspection with management and client. • Maintain good housekeeping at site.• Attend daily Construction co-ordination and Safety meeting.• PTW co-ordination and Implementation at site for Construction, Pre-commissioning and commissioning work. • Regular co-ordination with safety department on day to day activity.• Coordinate with Client and Sub contractors in all effective implementation of jobs.• Effective utilization of resources.• Site documentation works.• Set an example.SCOPE OF WORKS IN R-405 DAFTAH SHIS ROAD AND TUNNEL PROJECT: 1. RCC CULVERTS :• Execution of one big culvert with a size of two shells opening 3.5x3.5x170m. Base Slab 10x23x2.5 M, Roof Slab 10x23x2.0m • Execution of one culvert with a size of two shells opening 3.5x3.5x163m. Base Slab 8.2x13.75x0.6, Roof Slab 8.2x13.5x0.5M• Water stopper installation • Movement joint Cellular polyethylene sheet fixing• Wall waterproofing ( polyp rime painting,Bitustick fixing and Bitu board fixing )• Execution of Wing walls with various sizes

Project : ORYX GTL – Gas to liquid project, Owner : SASOL & QATAR PETROLEUM JOINT VENTUREMain Contractor : TECHNIP-ITALYJob Responsibility:• Responsible for 06 Leadsman and 166 workers • Know, understand, Apply and enforce all safety rules, regulations and precautions pertaining to work. • To conduct regular tool box meeting to all work crew to high light their responsibility and Job related hazards. • Ensure the proper usage of PPE at site.• Maintain good housekeeping at site.• Attend daily Construction co-ordination and Safety meeting.• PTW co-ordination and Implementation at site for Construction, Pre-commissioning and commissioning work. • Regular co-ordination with safety department on day to day activity.• Effective utilization of resources.SCOPE OF WORKS IN ORYX GTL PROJECT: 1.CONCRETE STRUCTURES: Execution of two big concrete structures with a height of 18.0metre fromFinished ground level (F.G.L).Each structure has 99 beams (of span 8.0metre,6.0metre),23 columns and 2 Slabs .Each structure has 224 anchor bolts and 262 insert plates. • Execution of 10 small structures at a height of 8.0m from F.G.L.• Execution of another 2 structures with 12 columns of 18.0m (without beams).2.HEATER FOUNDATIONS • Execution of 3 heater foundations in which one was the biggest heater foundation in ASIA (Productive of 863 Cu.M/Hr) having 63 columns at a heightof 6.20m from F.G.L It had 372 bucket type anchor bolts • Rest two heaters consists of 28 columns with a height of 4.10m.It had 140 3.EQUIPMENT FOUNDATIONS • Execution of around 40 equipment foundations for reactor with anchor bolts4.ANCHOR BOLTS INSTALLATION • Installation of anchor bolts and cross checking around 3000 anchor bolts5.ROAD WORKS • Construction of Box culverts , Road crossing drains and ditches, Gravel road, Concrete road,Asphalt road, Vehicular guard rail system.

May 2000 to October 2003Organization : Rich Construction , IndiaPosition held: Civil Engineer.Projects: Residential Buildings, Commercial Complexes, Telephone Exchange Building.Job Responsibility :• Planning and Execution of all kinds of Works • Estimation• Drafting• Coordination with the consultancy• Cost control