Bill W. Hamilton Email & Phone Number

Sealy, Tx, Us

North Sydney, Nsw, Au

Assures Planning & Scheduling standards are being met through technical audits. Provide direct support to projects as required in area of expertise. Guides development and execution of Project Controls execution plans. Participates in project kick-off, strategy development, and project set-up. Primary point of contact for Planning and Scheduling issue resolution and questions. Assists with performance appraisals for Planning and Scheduling staff. Participates in the interview process for new staff as required. Ensures deliverable produced by the Planning & Scheduling are of good quality. Reviews, Develops & Revises work instructions for Planning & Scheduling as required. Assists with the implementation of new software tools. Mentors new hires and subordinate co-workers as required assists with training of subordinate staff. Assists with staffing issues for Operations. Develop, revise, & maintain CPM schedules for EPC projects as required. Facilitates multi-discipline / company interactive planning sessions. Ability to interface engineering schedules with construction schedules or contractor schedules. Analyzes CPM Schedules and recommend work-around and schedule improvement ideas. Interacts with engineering discipline leads, construction managers and project managers to understand and communicate issues and conflicts that could have a potential impact on the schedule and articulate solutions that could prevent potential impact to the schedule. Lead in risk analysis function for the department. Able to direct and lead multi-person planning and scheduling staff. Expert in Primavera P6 and Primavera Risk software with Admin Skills. Extensive experience in Engineering, Procurement & Construction work process and activity sequence. Refinery, chemical plant & Power Generation facility EPC experience in all types and size projects. Experienced in construction management planning and scheduling. Mega, Large, Mid and Small project experienced.

North Sydney, Nsw, Au

Dallas, Tx, Us

Lead Planner / Scheduler, AL-2 Expansion Project, DuPont, Altamira Mexico. Responsibilities included: Accomplishes results through lower-level subordinate. Directs subordinates based on general policies and management guidance. Work is reviewed on completion for adequacy in meeting objectives. Interprets and executes policies that affect subordinate units. Heads a centralized function. Functions as unit advisor; involved in daily operations only to resolve complex problems or meet schedules. Frequent contacts with internal and external individuals at all management levels. Conducts briefings and participates in technical meetings related to specific operations. Plans and prepares production schedules for business unit or organization. Translates orders into a sequential work schedule: Draws up master schedule to establish sequence and lead time of each operation to meet completion deadlines: Analyzes specifications and performs mathematical calculations to determine production processes, tools, and human resource requirements: Plans and schedules workflow for each operation according to previously established sequences and lead times: Plans sequence of operations: Confers with supervisors to determine status of assigned projects: Expedites operations that delay schedules and alters schedules to meet unforeseen conditions: Prepares status reports: May prepare lists of required materials, tools, and equipment. Mitigate risk to the project. Work with procurement to determine vendors of equipment/service in order to run cost effective and time efficient production. Coordinate with Client internal and external to effectively schedule manpower across all projects.

Dallas, Tx, Us

Senior Planner/Scheduler, Syncrude Emissions Reduction Project, Ft Mc Murray, Alberta CA. Responsibilities included ensure that established planning and scheduling methodology are followed in the development and maintenance of the schedule. Developed project milestones and progress milestones for Commissioning and Start-up Schedule, integrated said schedule with the construction schedule. Developed and maintained System Turnover Stewardship to Jacobs, Client and Sub-Contractors. Updated progress in the integrated schedule, Prepared and issued updated PDF schedules per distribution list. Perform analysis of schedule data, communicated trends, issues, and areas requiring attention, to the project team. Coordinated a biweekly schedule progress reporting, including schedule forecast updates and schedule risk meeting. Liaises with all team leaders to communicate required completion dates and interfaces between responsible parties. Perform a Critical Path Analysis using the CPM method. Support Project scenario planning, risk assessment and management processes as needed for schedule risk analysis as directed by the Project Management Team. Supported Turnover Manager and doubled as an alternate Turnover Manager during his rotation out.

Dallas, Tx, Us

Consultant Planner/Scheduler, Deep Conversion Project, TOTAL, Port Arthur, Texas. Responsibilities included Primavera 6.2 Administrator, oversight of four junior planner / schedulers, worked continuously with the contractor EPC team to review, format, and recommend improvement changes to EPC schedule per TOTAL’s requirements for all Project Controls; provided scheduling analysis, recommendations for improvement where necessary; developed a mitigation plan to recover 45 days of delay in spool deliver from shop; worked closely with the TOTAL package managers to make sure they received proper reports and information required to make intelligent and reasonable decisions on the engineering, procurement and construction of the project; provided reliable and consistent forecast of construction activities and MC dates for work packages using intermediate milestones; assisted in the development of the work package to subsystem conversion into a commissioning and start-up schedule; developed and maintained pre-commissioning, commissioning and start up plan of the newly constructed process units; one four drum Coker Unit, KNHT Unit, DHT, Unit, and a two train sulfur block unit, along with multiple revamped units.Lead Planner/Scheduler; San Juan Coal Bed Methane Major Project, BP, Durango, Colorado: Responsibilities included demonstrating exemplary multi tasking and prioritization expertise to steer planning, estimating, and scheduling for several EPC projects; cleaned up and redeveloped EPC schedule Ensured consistent attention to cost control, productivity, and safety compliance.Senior Planner/Scheduler, Crude Expansion Project (CEP), Motiva, Port Arthur, Texas:Lead Planner/Scheduler, Naphtha Repositioning Project, BP, Texas City, Texas:Senior Planner/Scheduler, Dispersion Plant, BASF, Chattanooga, Tennessee: Responsibilities:

Turnaround Manager, Turnaround, BP America Production Company, Sunray, Texas. Responsibilities included developing turnaround cost estimate, oversight of planning/scheduling effort, develop and write turnaround execution, safety and environmental plans, report status of the cost estimate, planning/scheduling and material procurement for turnaround.

San Antonio, Texas, Us

Lead Planner/Scheduler, Turnaround Project, Innovene Chemical Company, Project Controls Manager, Major Boiler Outage, American Energy Power, Pittsburg, Texas. Project Controls Manager, Major Boiler Outage, American Energy Power, St. Albans, West Virginia. Scheduler, Capital Projects, Rohm and Hass Chemical Plant, Deer Park, Texas. Responsibilities included developed and implemented a strategy for maintaining and progressing turnaround schedule, trained planners in development of work plans, logic, and estimates for identified outage work, oversight of cost control, material procurement, and documentation, maintained CPM schedule in Primavera.Project Controls Liaison, Major Boiler Outage, Salt River Power, Page, Arizona. Responsibilities included monitoring installation of economizer tube replacement and tube weld count, observed the need to track number of tube welds and established a credible measurement method for quantity survey during installation of tube panels and weld counts; provided training to supervision on proper way to record progress their activities in Primavera and how to read cost reports.Project Controls Manager, Turnaround, CITGO Refinery, West Plant, Corpus Christi, Texas. Responsibilities included management and development of a level 4 schedule with 14,834 activities in Primavera, containing 21,999 relationships; effectively integrated maintenance and engineered projects into master schedule, composed foreman’s training module on schedule interpretation and followed up with actual training of supervision; furnished training for co-workers in scheduling techniques in Primavera, processed information from contractors and subcontractors and assimilated the information into client cost reporting format.

Houston, Texas, Us

Project Scheduling Specialist, Operations and Maintenance, Reliant Energy, Houston, Texas. Responsibilities included system wide inspections for plant outages, routine plant maintenance scheduling and project management support for 9 locations through out the Houston service area involving gas turbine, gas and solid fuel power generating plants; maintained direct supervision of 6 employees and cross training of three other employees; numerous appointments to process improvement and reengineering teams for business process redesign and presentation to executive management; co supervised craft allocation, a process that matched system priorities to plants needs and craft availability for the most economical solution; developed and presented resource allocation data for quarterly department and division meetings; oversight of the implementation of SAP for 5 business units from a project controls perspective over a 5 year period; developed and assisted in the implementation of a company wide equipment identification and tracking system, utilizing PID drawings, effectively contributed to the development and implementation of Reliant’s computer work management and material handling systems; generated work orders, work plans, and preventive maintenance for the installation, repair and routine maintenance of power generation equipment, i.e. turbines, boilers, heaters, pumps, conveyor systems, and piping; complied and tracked progress to completion of primavera activities, cost control measures and quantity surveys; maintained primarily rotating equipment for four coal fired units of 750 MW, performed corrective work, new equipment installation and preventive maintenance on equipment; complied and documented history in manual work logs, developed and consolidated many of Reliant’s protocols and procedures relating to operation and maintenance of equipment according to technical manuals and agreement of the generating facility; participated on numerous start-ups.

Washington, Dc, Us

Engine Room Supervisor, Department of Defense U.S., Navy, Little Creek, Virginia. Responsibilities included directing operation, maintenance readiness and reliability of #2 engine room of the USS Plymouth Rock LSD 29, appointed work station responsibilities to co-workers, inspected repair and maintenances work, maintained station watch logs and assigned watch stations to co-workers; oversight of retrofit of #1 and #2 main propulsion equipment and auxiliary support equipment; assisted in decommissioning and moth balling the combined boiler and main engine rooms of a Gearing 710 class destroyer.

Houston, Texas, Us

Heavy Equipment Mechanic, Operation and Maintenance: Responsibilities included maintenance and operation of heavy earth moving equipment, scheduled and performed both corrective and preventive maintenance on said equipment completed required paper work and documentation of work, sustained and analyzed the mechanical integrity of the equipment. I worked here while I was in High School and then returned after I was honorably discharged from the U.S. Navy active duty.

Associates, General

Associates Program, Mechanical Maintenance, Preventive Maintenance