Daniel Jacques Email & Phone Number

Edwards, California, United States

Manage multiple projects involving developmental test aircraft. More to follow.

Edwards Air Force Base

Leads F-35 flight test operations and routine aircraft maintenance.Ensures Good House keeping and Safety practices are enforced. Responsible for subordinate training, work assignments, and recognition/disciplinary actions.• Directs periodic inspections and general overhaul and repairs or modifications requiring replacement and assembly of parts.• Provides technical assistance as required.• Creates and assigns work-orders in the Autonomic Logistics Information System (ALIS).• Assists in signing off the aircraft release for flight. • Supervises multiple maintenance disciplines in an integrated workforce environment that consists of Military, Government Civil Service, Lockheed Martin, Northrop Grumman, Pratt and Whitney, General Electric and BAE systems employees.

Beale Air Force Base, California, United States

Lead night shift operations for the U-2 Periodic Depot Maintenance (PDM) program at Beale Air Force base. Worked in conjunction with schedulers to create timelines for critical maintenance tasks. Submitted requests for aircraft parts and consumables to meet production requirements. Delegated tasks to Lockheed technicians as well as third party contractors using our on site job order system. Ensured compliance to all local, state, and federal environmental safety and health (ESH) mandates, OSHA regulations and company policies. Coordinated ground support form the host unit, Attended daily production meetings, briefed customers and higher management regarding program status, needs, and changes. Coordinated with suppliers for parts and HAZMAT ordering, obtained quotes for tools and equipment purchases and presented proposals for funding. Worked closely with our delivery and sustainment representative to ensure compliance with all DCMA 8210 requirements. Lead efforts to prepare for DCMA audits and institute corrective actions when necessary. Reviewed quality deficiency reports and tracked emerging trends for analysis. Collaborated with peers to refine local procedures and increase efficiency. Generated local forms and created local policy training presentations for new hires. Conducted routine inspections of tool boxes, HAZMAT storage and waste, aircraft forms, FOD control areas and other local programs to ensure compliance with Lockheed Martin and US Air Force policies. Performed tasks for end-of-shift shutdown including 100% tool accountability, FOD walk, consumable log verification, a detailed written pass down for the following shift and completion of our nightly shutdown checklist. Served as the only adjunct instructor for the Aeronautics Field Sustainment U-2 program. Acted as training officer for the entire Beale PDM operation, worked with site manager to draft site specific master training plan, scheduled training for LM employees and contractors.

Beale Air Force Base, California, United States

Conducted routine internal audits to ensure compliance with DCMA 8210 requirements. Created annual audit schedules and developed site specific audit standards which resulted in nearly perfect DCMA audit results. Captured audit findings via AMS9000 averaging approximately 230 inspections annually. Acted as stand-in quality control manager for a team of multi-functional QA inspectors, delegated quality assurance tasks and created detailed weekly reports for higher management. Trained new QA inspectors In the use of automated systems and data collection. Inspected U-2 depot maintenance and repair activities while insuring compliance with USAF technical orders and Lockheed Martin proprietary maintenance standards. Inspected aircraft parts to evaluate damage using USAF and Lockheed Martin serviceability criteria. Researched U-2 technical drawings and blue-prints to identify critical dimensions and fastener information to facilitate specialty repairs.Captured FOD metrics via excel spreadsheets and generated graphs and other visual aids for reporting purposes. Maintained FOD records for trend analysis. Assisted in the development of local tool control programs, built and inventoried Consolidated tool kits and coordinated with supply personnel for tool purchasing. Aided in the inventory of local tool room and created infrastructure for local tool control policies that exceed DCMA 8210 standards. Created various local forms and generated fillable PDF versions that existing forms to that increased program efficiency. Created HAZMAT inventory database with advanced excel formulas which simplified expiration date tracking for all locally stored chemicals. Created an advanced database for tracking maintenance deficiency reports that automatically generates easily understandable reporting metrics. Developed local procedures and forms to capture time and maintenance for F.O.M. components and trained technicians on proper use of forms and records.

Fresno, California, United States

Ensure compliance with all US Army technical manuals, facility ground operating procedures (GOP) and local operating instructions (LOI), conducted inspections of manufactured aircraft parts for dimensional accuracy and general airworthiness. Continually updated aircraft logbooks and historical records. Coordinated with army engineers to design and implement specialized repair procedures. Ensured compliance with all safety of flight, Army safety action messages (ASAM) and Army maintenance action messages (AMAM). Conduct inspections of local safety and ground support equipment. Ensured compliance with all tool storage safety and foreign object damage (FOD) programs. Tracked flight hours for timed aircraft components and managed control exchange directives. Logged maintenance and structural deficiencies using electronic Army Aircraft Notebook (ACN).

Fresno, California, United States

Conduct Daily aircraft inspections and routine maintenance procedures in compliance with technical manuals for multiple aircraft types including UH-60 models A,L,H,M, CH-47 models D,F, AH-64 Model D.Conduct major and minor component depopulation and reassembly to include aircraft engines, rotor head, main transmission, oil cooler, auxiliary power unit, drive shafts, rotor blades etc. Perform component inspections to determine serviceability. Conduct aircraft wash. Perform aircraft flight control rigging operations. Perform flight hour timed maintenance such as phase maintenance on UH-60 and CH-47 platforms. Performed testing on aircraft electrical systems. Serviced hydraulic and pneumatic systems.Perform load out operations for AH-64 and UH-60 aircraft. Perform fuel system diagnostics. Evaluate damages to metal and composite structures, surfaces and internal components to determine techniques and sequence of operations for necessary repairs. Remove and install rivets, screws, bolts and other aircraft fasteners for proper disassembly and reassemble sheet metal components. Work with blueprints and technical drawings required for modifications and repairs when necessary.Researched and ordered all necessary aircraft components, hardware and chemicals required to complete maintenance demands. Maintained detailed maintenance logs using Army ACN work environment software. Provided status updates to director of maintenance. Complied with all organizational and US Army safety regulations.

1106Th Tasmg Fresno, California, United States

Conduct Daily aircraft inspections and routine maintenance procedures in compliance with technical manuals for multiple aircraft types including UH-60 models A,L,H,M, CH-47 models D,F, AH-64 Model D.Conduct major and minor component depopulation and reassembly to include aircraft engines, rotor head, main transmission, oil cooler, auxiliary power unit, drive shafts, rotor blades etc. Perform component inspections to determine serviceability. Conduct aircraft wash. Perform aircraft flight control rigging operations. Perform flight hour timed maintenance such as phase maintenance on UH-60 and CH-47 platforms. Performed testing on aircraft electrical systems. Serviced hydraulic and pneumatic systems. Perform load out operations for AH-64 and UH-60 aircraft. Perform fuel system diagnostics. Evaluate damages to metal and composite structures, surfaces and internal components to determine techniques and sequence of operations for necessary repairs. Remove and install rivets, screws, bolts and other aircraft fasteners for proper disassembly and reassemble sheet metal components. Work with blueprints and technical drawings required for modifications and repairs when necessary.Researched and ordered all necessary aircraft components, hardware and chemicals required to complete maintenance demands. Maintained detailed maintenance logs using Army ACN work environment software. Provided status updates to director of maintenance. Complied with all organizational and US Army safety regulations.

1106Th Tasmg Fresno, California, United States

Oversaw the daily activities of 40 plus individuals. Manage maintenance / paint supply personnel;hazmat disposal personnel; nondestructive inspection personnel; aircraft structures personnel;computer operator personnel; aircraft paint personnel; aircraft maintenance / paint teams.Responsible for presenting up-to-date status reports for multiple aircraft projects to production control managers and customer points of contact. Assisted with planning maintenance cycle timelines and assigning project teams. Coordinated work flow for multifunctional teams. worked with Subject matter experts to improve process efficiency by eliminating waste while implementing LEAN management principals. Aided with special tool and equipment testing and purchases.

1106 Th Tasmg Fresno, California, United States

Perform depot, medium and light structural repairs on all U.S. Army aircraft, to include UH-60,CH-47, OH-58 and AH-64 platforms. Advise and assist engineering in designing repair procedure MEC’s for upcoming depot level repairs. Disassembles, modifies, repairs and assemblesstructural parts on aircraft and aircraft components. Routinely use critical thinking and/or mathematical calculations to solve difficult repairs in a timely and efficient manner. Leadcontact teams to facilitate difficult depot level repairs for National Guard Aviation Facilitiesthat the 1106th TASMG Sheet metal shop supports in the 13 western states, to include theplanning, coordination, travel and completion of maintenance. Work with blueprints and technical drawings required for modifications and repairs when necessary. Proficient inspection tooling: Fixtures and Alignment tools used to repair and/or replace main structuralbeams; flight control servos; and attachment fittings. Evaluate damages to structures, surfaces and internal components to determine techniques and sequence of operations for necessary repairs. Experience performing standard and depot level repair procedures on UH-60, CH-47 and AH-64 aircraft platforms. Provide technical guidance to subordinate personnel and supporting units. Remove and install rivets, screws, bolts and other aircraft fasteners for proper disassembly and reassemble sheet metal components.

1106 Th Tasmg Fresno, California

Perform depot, medium and light structural repairs on all U.S. Army aircraft, to include UH-60, CH-47, OH-58 and AH-64 platforms. ● Advise and assist engineering in designing repair procedure MEC’s for upcoming depot level repairs. ● Disassembles, modifies, repairs and assembles structural parts on aircraft and aircraft components ● Routinely use critical thinking and/or mathematical calculations to solve difficult repairs in a timely and efficient manner. ● Lead contact teams to facilitate difficult depot level repairs for National Guard Aviation Facilities that the 1106th TASMG Sheet metal shop supports in the 13 western states, to include the planning, coordination, travel and completion of maintenance. ● Work with blueprints and technical drawings required for modifications and repairs when necessary. ● Proficient in special tooling; Fixtures and Alignment tools used to repair and/or replace main structural beams, flight control servos, and attachment fittings. ● Evaluate damages to structures, surfaces and internal components to determine techniques and sequence of operations for necessary repairs. ● Experience performing standard and depot level repair procedures on UH-60, CH-47 and AH-64 aircraft platforms. ● Provide technical guidance to subordinate personnel and supporting units. ● Remove and install rivets, screws, bolts and other aircraft fasteners for proper disassembly and reassemble sheet metal components

Master Of Business Administration - Mba, Business Administration And Management, General, Gpa: 3.55

Certificate, Project Management, 3.8

Bachelor'S Degree, Business Administration And Management, General, Gpa: 3.79

Activities and Societies: National society of collegiate scholars

Certificate, Rotor Blade Protective Coating Application And Repair Course

Certificate, Leak Detection Equipment Training

Advanced Composite Structures Course, Aircraft Composite Structure Repair

Mos 15 G Training, Aviation Structural Repair Course

High School Diploma