Daniel Midden Email & Phone Number

Responsible for commission waste water and water treatment plants using the Zenon Membrane Technology for commercial and public work’s needs. Duties included but not limited to ensuring the system was installed correctly using piping and instrument drawings. Installing, testing, and editing system program logic controller. Testing and calibrating all system inputs and outputs using electrical drawings. Installing, testing and repairing Zenon Membrane media.

Responsible for writing proposals and conducting research for continuous quality improvement inside of an automotive supplier, proving the cause of non-conforming parts as per the camber requirement with brake pads. Measured the capability for changing the manufacturing process as related to the deburring method from belt sanding to high energy deburring. Reviewed control plans to insure all quality checks were universal throughout the quality control system. Designed and built new numbering… Show more Responsible for writing proposals and conducting research for continuous quality improvement inside of an automotive supplier, proving the cause of non-conforming parts as per the camber requirement with brake pads. Measured the capability for changing the manufacturing process as related to the deburring method from belt sanding to high energy deburring. Reviewed control plans to insure all quality checks were universal throughout the quality control system. Designed and built new numbering system database for gauge tracking. Conducted gauge repeatability and reproducibility to meet internal and external standards Show less

Responsible for preliminary design drawings for new medical arts building for Fleming County Hospital in Northeast Kentucky; using AutoCAD designing three prototype buildings divided into office areas including large medical records / reception area, employee break area, exam rooms, and basement. •Interfaced with hospital management •Collaborated with hospital personal in layout and exterior design •Designed the electrical system for building •Wrote request for… Show more Responsible for preliminary design drawings for new medical arts building for Fleming County Hospital in Northeast Kentucky; using AutoCAD designing three prototype buildings divided into office areas including large medical records / reception area, employee break area, exam rooms, and basement. •Interfaced with hospital management •Collaborated with hospital personal in layout and exterior design •Designed the electrical system for building •Wrote request for estimates•Wrote bid announcements •Presented project with estimate of construction to hospital board. Show less

Responsible for electrical construction operations of four substations for the Noble Environmental Power projects in upstate NY to connect 240 1.5MW GE wind turbines to the NYPA grid. The projects included site upgrades to three existing stations and the construction of a new ring-bus station. •Coordinated personnel, material, and documentation during all construction activities•Collaborated in the writing of the Field Procedure Manual and Project Quality Procedure Manual•Review… Show more Responsible for electrical construction operations of four substations for the Noble Environmental Power projects in upstate NY to connect 240 1.5MW GE wind turbines to the NYPA grid. The projects included site upgrades to three existing stations and the construction of a new ring-bus station. •Coordinated personnel, material, and documentation during all construction activities•Collaborated in the writing of the Field Procedure Manual and Project Quality Procedure Manual•Review Field Change Notices and Engineering Change Notice red line drawings as needed•Interfaced with management at all levels in construction activates•Reviewed bid packages from contractors•Established tracking mechanism for hold points of project•Served as Site Manger on a rotating as-needed basis•Coordinated material procurement issues with contractor and owner •Developed Turn Over Packages (TOP’s) for commissioning and project close outs.•Reviewed material to insure specifications Show less

Responsible for final stage of electrical construction and commissioning of a 700MW combine cycle expansion to the Ras Abu Fontas Power and Water Distillation Plant. •Served as team leader in the efforts to identify major code violations and offered solutions to rectify these with minimum schedule impact. •Generated NCR’S and ensured contractor completed work to satisfactory level.•Participated in audit evaluation of site quality program•Interfaced with management at all… Show more Responsible for final stage of electrical construction and commissioning of a 700MW combine cycle expansion to the Ras Abu Fontas Power and Water Distillation Plant. •Served as team leader in the efforts to identify major code violations and offered solutions to rectify these with minimum schedule impact. •Generated NCR’S and ensured contractor completed work to satisfactory level.•Participated in audit evaluation of site quality program•Interfaced with management at all levels in construction activates •Reviewed close out documentation in preparation for project close-out •Established communication flow charts to expedite information flow between management/engineers and contractors to minimize schedule and cost impact.•Wrote preventive maintenance procedures for critical and non-critical equipment Show less

Operated a 70 MW gas turbine peaker power plant comprised of TM2500 engines. •Communicated with ISO New England representatives in dispatching the plant. •Oversaw and performed maintenance and repair to engine hydraulic starting system and generator battery charging systems. •Ensured operation of plant was in accordance with CES operating procedures. •Using AutoCAD designed an improvement to the operating mechanism for the dematerialized water leveling system. Provided… Show more Operated a 70 MW gas turbine peaker power plant comprised of TM2500 engines. •Communicated with ISO New England representatives in dispatching the plant. •Oversaw and performed maintenance and repair to engine hydraulic starting system and generator battery charging systems. •Ensured operation of plant was in accordance with CES operating procedures. •Using AutoCAD designed an improvement to the operating mechanism for the dematerialized water leveling system. Provided costing and established a construction schedule for installation Show less

Served as a maintenance technician at various manufacturing plants in Kentucky. Activities included;•Testing and calibrating CNC machines •Program 32 bit processor for machine operation•Added electrical circuits to machines operations•Rebuilding and replacing electrical motors, electrical panels, machine circuitry, electrical enclosures, variable frequency drives, and filling machines •Developed bill of materials and cost estimates for projects updating plant… Show more Served as a maintenance technician at various manufacturing plants in Kentucky. Activities included;•Testing and calibrating CNC machines •Program 32 bit processor for machine operation•Added electrical circuits to machines operations•Rebuilding and replacing electrical motors, electrical panels, machine circuitry, electrical enclosures, variable frequency drives, and filling machines •Developed bill of materials and cost estimates for projects updating plant equipment•Wrote PLC programs for plant equipment•Wrote preventive maintenance procedures for critical and non-critical equipment.•Using AutoCAD in design of new motor control center •Performed root cause analysis on regular occurring faults. Show less

•Supervised a team of 7 responsible for operation and maintenance of 4 – electrical generator plants •Wrote proposals for repair and maintenance bids including scope of work, priority of work and work specifics. Inspected work of contractors.•Rotated service as “on-call” supervisor. Provided solutions for immediate repair of plant problems•With a team of 3 operated a 39KW power plant using four Farbank-Morses diesel engines •Inspected mobile and portable electrical tools on a… Show more •Supervised a team of 7 responsible for operation and maintenance of 4 – electrical generator plants •Wrote proposals for repair and maintenance bids including scope of work, priority of work and work specifics. Inspected work of contractors.•Rotated service as “on-call” supervisor. Provided solutions for immediate repair of plant problems•With a team of 3 operated a 39KW power plant using four Farbank-Morses diesel engines •Inspected mobile and portable electrical tools on a semi-annual basses for electrical safety Show less