Please complete the CAPTCHA to continue
A concise factual answer block for searchers comparing this professional profile.
Dilanka Edirimanna is listed as Structural Engineer in Training at Allnorth Consultants Limited, a with 383 employees, based in Saskatoon, Saskatchewan, Canada. AeroLeads shows a matched LinkedIn profile for Dilanka Edirimanna.
Dilanka Edirimanna previously worked as Field Technician at P. Machibroda Engineering Ltd. and Junior Structural Engineer at Engineering Design & Project Management Consultants Pvt. Ltd.. Dilanka Edirimanna holds Master Of Engineering - Meng, Civil Engineering from Postgraduate Institute Of Science (Pgis), University Of Peradeniya.
This section adds company-level context without repeating Dilanka Edirimanna's masked contact details.
Review company-level records connected to Dilanka Edirimanna before choosing the right outreach path.
Junior Structural Engineer, a team player with relevant qualifications combined with good analytical, communication, report writing, and time management skills.4+ years of experience in Structural design.
Listed skills include Microsoft Office, Customer Service, Microsoft Excel, Management, and 6 others.
Company context helps verify the profile and gives searchers a useful next step.
A career timeline built from the work history available for this profile.
Canada
01.) Industrial:- Structural steel/ concrete - Foundation designs - Underground structures 02.) Civil and Transportation- Sheet pile designs - Pre-cast, Pretension concrete Bridge Designs. Midas /AREMA
Sri Lanka
Project: Construction of 27.7 km Long Tunnels in Sri Lanka. • Provide structural design calculations, sketches, and reports for structural steel, and concrete structures. (Ring Beam, Buried Box culverts, short span bridges , retaining walls and Toe walls, steel shoring systems)• Perform design drawing review and assistance with solutions for the construction and repair of industrial buildings.• Carry out foundation design, complex analysis and calculations, estimates of project costs, and preparation of reports.• Perform field investigations and inspections.• Ensure completion of work within allotted schedules and budgets and with high-quality standards.
Central Expressway Project in Sri Lanka.
Sri Lanka
Project: Rehabilitation and Improvement of National Roads in Sri Lanka.• Assist with scoping, budgeting, and designing bridges, industrial structures, land development, and field services.• Structural evaluation of bridges and preparation of evaluation reports.• Provide general assistance to Project Engineers on a variety of other tasks.• Prepare detailed design calculations and planning reports.• Carry out condition assessments and structural visual inspections.• Project coordination.• Perform field inspections/assessments• Inspection and Contract Administration.
Sri Lanka
Project: Central Expressway Project.• Assist in calculations for the design of bridges, draft structural plans, assist in writing structural design reports, calculate quantities, develop cost estimates create and manage structural details, and work in conjunction with CADD drafters to develop structural bridge drawings.• Daily monitoring of the construction work to ensure the design/contract conformities.• Assist with field condition inspection reviews and preparation of summary reports.
Sri Lanka
Construction of 10-story residential Building.• Construction plan and specification preparation, and spreadsheet preparation.• Report writing, large report production, construction cost estimating, Quantity calculation, and construction observation.
Colombo, Western, Sri Lanka
This model of a pendulum-style tuned mass damper in a skyscraper. the cart is pulled back and give the building a bump which excites its resonant frequency just like an earthquake or strong wind event. The benefit here is it can be done in a somewhat repeatable fashion, Therefore the effectiveness of the damper can be evaluated. For the TMD, the damping comes from the tension of the screw which is acting as the hinge. It can be tighten the screw to increase the damping. The tuning comes from moving this mass up or down on the pendulum shaft. This changes frequency of the pendulum just like a metronome, which can be tuned to the resonant frequency of the building. There is a accelerometer on top of the building so we can measure its movements, and this hooked to an Arduino clone which is sending the data to the laptop.CONCLUSION The natural damping ratio of the Model building = 0.0261 The new damping ratio of the Model building = 0.0868
Colombo, Western, Sri Lanka
Project : Havelock City phrase III project, ColomboExperienced in :- Bar schedule preparation ( Beam, Column, Slab, Ramp, Shear wall , Staircase ) Chemical rock blasting , Design of shoring systems , mass concreting- Setting outs, Pile foundations, Welding Inspection, Formworks and slab levelling, Ground anchoring and water proofing etc.)
Colombo, Western, Sri Lanka
Projects - Waterfront integrated resort project (Keells city), Slave Island- Colombo Lotus Tower project- Design sessions (SAP 2000) at Design office - Analysis of high rise buildings, water retaining structures and precast elements using SAP 2000.
Other employees you can reach at allnorth.com. View company contacts for 383 employees →
Carla Leask
Colleague at Allnorth Consultants LimitedSaskatchewan, Canada
View →
DW
David Waiting
Colleague at Allnorth Consultants LimitedDidsbury, Alberta, Canada
View →
TA
Tania Akehurst, Ba, Ma, Pmp
Colleague at Allnorth Consultants LimitedCalgary, Alberta, Canada
View →
JS
Jack Sandul
Colleague at Allnorth Consultants LimitedGreenview 16, Alberta, Canada
View →
JF
Jonathan Faloon
Colleague at Allnorth Consultants LimitedGreater Calgary Metropolitan Area, Canada
View →
ZD
Zac Dubinak
Colleague at Allnorth Consultants LimitedSaskatchewan, Canada
View →
ES
Emily S.
Colleague at Allnorth Consultants LimitedCanada
View →
JO
Julian Ospina
Colleague at Allnorth Consultants LimitedFort Mcmurray, Alberta, Canada
View →
JR
John Renouf
Colleague at Allnorth Consultants LimitedGreater St. John'S Metropolitan Area, Canada
View →
RM
Ryan Monsees
Colleague at Allnorth Consultants LimitedBritish Columbia, Canada
View →
Core Modules : Finite Elements Methods, Design of steel structures, Design of concrete structures, High-Rise Buildings, Bridge.
Activities and Societies: https://badges.wes.org/Evidence?i=e504e542-6915-4875-9bd7-a6e2d7e22d27&type=ca
Quick answers generated from the profile data available on this page.
Dilanka Edirimanna works for Allnorth Consultants Limited.
Dilanka Edirimanna is listed as Structural Engineer in Training at Allnorth Consultants Limited.
Dilanka Edirimanna is based in Saskatoon, Saskatchewan, Canada while working with Allnorth Consultants Limited.
Dilanka Edirimanna has worked for Allnorth Consultants Limited, P. Machibroda Engineering Ltd., Engineering Design & Project Management Consultants Pvt. Ltd., Maga Engineering (Private) Limited, and Iesl - Ruhuna Engineering Students Chapter.
Dilanka Edirimanna's colleagues at Allnorth Consultants Limited include Carla Leask, David Waiting, Tania Akehurst, Ba, Ma, Pmp, Jack Sandul, and Jonathan Faloon.
You can use AeroLeads to view verified contact signals for Dilanka Edirimanna at Allnorth Consultants Limited, including work email, phone, and LinkedIn data when available.
Dilanka Edirimanna holds Master Of Engineering - Meng, Civil Engineering from Postgraduate Institute Of Science (Pgis), University Of Peradeniya.
Dilanka Edirimanna is listed with skills including Microsoft Office, Customer Service, Microsoft Excel, Management, Microsoft Word, Powerpoint, Public Speaking, and Research.
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trial Search contactsCheck these profiles if this is not the Dilanka Edirimanna you were looking for.
