• Direct oversight on external projects as Project Manager;• Preparation of Technical Responsibility Annotations (ARTs);• IQA – Completion of data for generator installation validation;• Creation of schedules in MS Project;• Tracking project KPIs in Power BI and Power Apps;• Updating the General Control with project information for review in project handover meetings (admin) and technical handovers;• Conducting project meetings with clients for technical validations;• Creating cost spreadsheets for special projects;• Monitoring project costs;• Preparing, reviewing, and sending documentation/projects to clients;• Technical discussions on installation implementation;• Tracking project pending tasks and project finalization;• Meeting and developing external suppliers for product, project, and installation development;• Approval of external supplier projects (electrical and mechanical);• Support in the quality management process for installers and key suppliers for DCB;• Implementing HSE safety measurement methodologies for high-risk activities;• Generator commissioning, with direct involvement in activities and issuing technical reports;• Conducting measurements with equipment: energy analyzer, thermographic camera, and others.

* Configure new mounting options in CMES - IAC Environment; * Support HSE related projects (Ergonomics, Noise, NR12); * Assist in the management of bottlenecks, capacity, production times and balancing; * Support VSM for new implementations on the assembly line; * Configure new Shop Orders in the Systems (Oracle and CMES); * Participation in FMEA Projects; * Monitoring of Prototype engines on the Assembly line; * Deliver Manufacturing activities for VPIs and VPCs projects within the assembly, test and Finishing lines; * Support the development of new equipment and devices; * Support activities related to Torque management; * Support in changes and improvements of workstations and layout update; * Support Assembly lines in Improvement and/or Corrective actions related to HSE, Productivity and Quality;* Elaborate Process Documentation / SWM (Operator Instruction / PFMEA / Control Plan / among others); * Assist leadership in production initiatives supporting TBWS; * Assist in the application of functional and operational excellence in ME IE processes; * Assist in monitoring and improving the capability of assembly lines; * Attend Internal and External Audits IATF16949 and VDAs 5.2 and 6.3 (Implement adjustments when necessary); * Be integrated with Manufacturing Engineers and/or Leaders.

Ensure daily delivery;* Execution of CAPDO Projects focusing on Internal failures;* Monitoring, carrying out and guiding the Team's Kaizen projects.* Analysis of internal and external failures;* Development of action plans to improve performance and processes;* Verification of checklist, Stop card, hoist diaries, cleaning plan;* Monitoring engine rework and component scrap;* Perform JOB ROTATION of employees;* Ensure the OSHA index;* Perform Preliminary Analysis of Sector Risks jointly with the HSE team;* Control of the production process following the WIP of engines;* Line balancing management;* Conduct employee training;* Ensure and execute the Housekeeping of the work environment;* Ensuring that LOTO is followed;* Check the processes and procedures carried out;* Ensuring full compliance with organizational goals;* Monitor Time indicators.

* Monitoring and targeting of priorities ensuring the daily delivery of engines to the customer; * Analysis of internal and external failures; * Development of action plans to improve performance and processes; * Verification of checklist, Stop card, hoist diaries, cleaning plan; * Monitoring engine rework and component scrap; * Perform JOB ROTATION of assembly employees; * Development of Kaizen projects (Safety, Quality, Costs and Productivity); * Ensure the OSHA index; * Carry out work aimed at: Ergonomic Risks, Examples: Stages 20630 and 20640. * Carry out Preliminary Analysis of the Sector Risks jointly with the HSE team; * Control of the production process following the WIP of engines; * Line balancing management; * Conduct employee training; * Ensure and execute the Housekeeping of the work environment; * Adequacy of LOTO;* Check the processes and procedures carried out; * Ensuring full compliance with organizational goals; * Monitor productivity indicators such as: MTBF, MTTR, Uptime and PED. * Purchase of tools for the ATPU area;

* Execution of VSM projects together with Engineers and Industry Analyst; * Development of Kaizen projects (Safety, Quality, Costs and Productivity); with a view to enabling cost reduction. * Ensure the OSHA index; * Carry out work focused on: Ergonomic Risks, Noise Reduction; * Perform Preliminary Analysis of Sector Risks jointly with the HSE team; * Monitoring of Internal and External Audits; * Control of the production process following the WIP of engines; * Analysis of internal and external failures; * Development of action plans to improve performance and processes; * Verification of checklist, Stop card, hoist diaries, cleaning plan; * Line balancing management; * Conduct employee training; * Ensure and execute the Housekeeping of the work environment; * Adequacy of LOTO; * Check the processes and procedures carried out; * Ensuring full compliance with organizational goals; * Monitor productivity indicators such as: MTBF, MTTR, Uptime and PED. * Purchase of tools for the ATPU area;

* Monitoring and directing the priorities ensuring the delivery of motors daily to the client; * Participation in the realization of FMEA, next to the engineering team; * Analysis of internal and external failures; * Elaboration of action plans to improve performance and processes; * Check-list check, Stop card, log book, cleaning plan; * Monitoring of engine rework and component scrap; * Perform JOB ROTATION of the assembly and test employees; * Ensure that Preventive Maintenance plans are being carried out; * Pillar ME Multiplier Projects for Reducing Setup / SMED in test rooms 8, 9 and 10, Monitoring of ME project improvements. Implement and monitor improvement plans identified in 5S audits. * Accompaniment and support to the team of Manufacturing Engineering in the design of the new AVL test rooms. * Training on Ergonomics with the Group Posturing September / 2016 to February / 2017.

* Line balancing management; * Verify the processes and procedures performed; * Ensure full compliance with organizational goals; * Shopping for tools for the ATPU area; * Development of Kaizen projects (Security, Quality, Costs and Productivity); with the aim of reducing costs. * Follow-up of Internal and External Audits; * Control of the productive process accompanying the WIP of engines; * Analysis of internal and external failures; * Elaboration of action plans to improve performance and processes; * Check-list check, Stop card, log book, cleaning plan;

Analysis of internal and external failures; * Elaboration of action plans to improve performance and processes; * Check-list check, Stop card, log book, cleaning plan; * Verify the processes and procedures performed; * Guidance and training of employees; * Line balancing management; * Monitoring of engine rework and component scrap;

* Monitor production activities; * Verify the processes and procedures performed; * Guidance and training of employees; * Line balancing management; * Ensure that QTC's are being applied correctly. * Ensure full compliance with organizational goals; * Participation in multifunctional group in the realization of security MPSP; * Shopping for tools for the ATPU area; * Development of Kaizen projects (Security, Quality, Costs and Productivity); with the aim of reducing costs. * Follow-up of Internal and External Audits; * Control of the productive process accompanying the WIP of engines; * Multiplier of the Pillar ME - Works of reduction of costs in the machines 14 C / D of the Assembly BC;

Assembly of diesel engines ensuring product quality, adequate work rhythm. Responsible for maintaining a clean and organized workplace, I worked with Safety facilitator and was responsible for numerous activities such as: 5-minute daily meeting, Kaizen's and 5S work experience, excellent relationship with factory engineering to carry out activities of the CIPA, since I acted as Cipeiro to the sector of the assembly area. I also worked as a productivity facilitator acting at the bottleneck stages, assuring the pace of work appropriate to the job.

Monitoring the performance of operators and guiding when necessary to maintain the pace, quality and productivity of work. It analyzes daily production reports and identifies deviations from process standards. In addition to controlling the production flow, taking care of organization, with the ability to solve problems efficiently. Able to lead, motivate and be a mentor to help the team achieve the desired results. Ensure that all employees are effectively trained, involved, and managed through performance, talent, and competency development processes that will help maintain efficiency and productivity, ensure that improvements are made and metrics are controlled, and ensure that the production deadlines are always fulfilled and maintained at a high level of consistency. Ability to communicate interacting with the production team, ensuring that all employees and their ideas are respected and valued, confirming that their unique and diverse perspectives are leveraged and showing that their contributions are regularly observed - all to solidify positive results in the environment of production.

Attention to the NEC production lines of Brazil, acting in tests of electronic panels such as: Optical cabinets, ERBs and micro cells serving regions of the interior of São Paulo, example: São José dos Campos, Campinas, Piracicaba among other cities. Responsible for monitoring and analyzing test data in order to solve any problems related to the quality and good functioning of the equipment.

Responsible for the assembly of the electronic panels, configuration of setups of the cabinets as requested by customers, assembly and installation of batteries for the correct development of equipment, assembly of cables according to the configuration defined by NEC do Brasil. Responsible for maintaining clean, organized workplace, Support to assemblers and electronic technicians to ensure that activities are followed correctly.

Responsible for working on injection molded and blowing machines for the preparation of trays and bottles, in addition to seasonal products such as: Batman, Santa Claus, Easter Bunny, Pajamas Bananas.