Please complete the CAPTCHA to continue
@tfsg.us
✓
2 phones found area 703
✓
LinkedIn matched
A concise factual answer block for searchers comparing this professional profile.
Eugene Jansen is listed as President | Chief Engineer | Consultant at Thermal and Fluids Solutions Group, LLC, a with 4 employees, based in Stafford, Virginia, United States. AeroLeads shows a work email signal at tfsg.us, phone signal with area code 703, and a matched LinkedIn profile for Eugene Jansen.
Eugene Jansen previously worked as President and Chief Engineer at Thermal And Fluids Solutions Group, Llc and Thermal Management Fellow at Magnix. Eugene Jansen holds Master'S, Mechanical And Aerospace Engineering, 3.7 Gpa from University Of Virginia.
This section adds company-level context without repeating Eugene Jansen's masked contact details.
AeroLeads found 1 current-domain work email signal for Eugene Jansen. Compare company email patterns before reaching out.
I am ready to pursue a Executive or Senior Engineering Leadership position locally in the Northern Virginia area with over 15 years of successful Engineering Leadership. I am a licensed Professional Engineer and Thermal Management Expert with extensive experience applying advanced data processing methods, such as AI/ML, to complex physical problems.At magniX, I led and supported the design, development, and testing of innovative thermal solutions for electric aircraft systems, leveraging my expertise in data processing, two-phase cooling, heat exchangers, flow devices, and thermal analysis. I also collaborated with internal and external stakeholders, including customers, suppliers, research partners, and regulatory agencies, to ensure the highest standards of performance, safety, and reliability. I also managed Government proposals, led University and business collaborations, and developed budgets and rate formulations inline with DCAA requirements.Prior to joining magniX, I was the owner, operator, president and chief engineer of Thermal and Fluids Solutions Group, LLC, a consulting firm that provided advanced thermal and fluids solutions development for multiple Fortune 500 engineering firms. I managed all aspects of the business, from proposal writing and budgeting, to product development and sales, to payroll and taxes. I also served as a subject matter expert, a product evangelist, an international mentor, an undergraduate industry teacher, and an inventor, with dozens of full utility and provisional patent filings.I am passionate about solving complex thermal and fluids challenges, creating value for customers and partners, and advancing the future of humankind. I am always eager to apply new technologies such as generative AI (LLMs), and to share my knowledge and experience with others. I am a versatile, motivated, and committed engineering leader, who strives to deliver results and make a lasting impact with my work.
Listed skills include Engineering, Thermal Analysis, Finite Element Analysis, Systems Engineering, and 46 others.
Company context helps verify the profile and gives searchers a useful next step.
A career timeline built from the work history available for this profile.
Stafford, Virginia, United States
Full-time consultant in Thermal and Fluids Systems Optimization, Design, Modeling and Component Selection. If it absolutely must be done right the first time, I'm your guy! Extensive experience in Defense systems including high energy laser and various other military hardened electronics.
Electrified Future of FlightThermal and Fluids Subject Matter ExpertBattery Thermal ManagementFuel Cell Concepts and AnalysisGovernment Proposal ManagerGovernment Compliance - SAM, DCAA, DOE, etc.International Business Development
Stafford, Virginia, United States
Advanced Thermal and Fluids Solutions DevelopmentSubject Matter Expert - Multiple Fortune 500 Engineering FirmsProgram Management - Proposal Management, Planning, Budgeting & SchedulingBusiness Management - Business Development, Sales, Taxes, Payroll & Cash FlowProduct Evangelist and Business Partner - Equilibar Thermal Back Pressure RegulatorsInternational Mentor - University of Birmingham PhD. StudentUndergraduate Industry Teacher - George Washington UniversityInventor - Dozens of Full Utility and Provisional Patent FilingsStartup Consultant to Successful Small Businesses
Manassas, Va
- Led and mentored a team of multi-disciplinary engineers around the country in successful development of a next-generation two-phase cooling system for iso-thermally sensitive electronic and optical components- Effectively managed multiple sub-contracts in the $millions spanning various functions and products including: pressure vessel design and manufacture, cold plate design and manufacture, heat exchanger design and manufacture, and custom pressure regulator design and manufacture- Represented Lockheed Martin as the subject matter expert to the customer, research and development staff of the Army/Navy/Marines, and Lockheed Martin Fellows through dozens of presentations- Met or exceeded all system-level requirements while optimizing size, weight and performance- Led the development of custom heat transfer software verified by physical test, including a evaporative phase change material heat exchanger model and a two-phase nucleate/convective boiling model- Drafted contract and sub-contract documentation and tracked execution including: system requirements, test plans/procedures/reports, review slides, monthly reports, control account reporting, basis of estimate, schedule, control account plan, requests for information/quote/proposal, statements of work, ROM estimates, technical specifications and proprietary information exchange agreements- Architected a $millions capital two-phase test loop for the Bothell, WA facility that exceeds current performance requirements by 600% and demonstrates precise control well outside of design conditions
Manassas, Va
- Applied military specifications and derived loads to perform structural and thermal finite element analysis- Completed structural and thermal analysis and test on time and under budget- Qualified by test 100% of components analyzed for structural and thermal failure potential- Created a lasting impact on the main line of business including: redesign of 4U and 6U heat exchangers, implementation of a field verified torque specification, and identification of more robust air seals- Presented frequently to customers and program management regarding analysis and test results- Achieved corrective action for all business Environmental Qualification Test failures within 30 days of failure including diagnosis, analysis, rebuild, retest and documentation- Led all structural and thermal analyses for Acoustic Rapid COTS Insertion Technology Insertion 12 including oversight of several analyses performed remotely in Syracuse, NY
Manassas, Va
- Led multiple engineers in the rapid development, design and testing of large advanced two-phase evaporator and condenser heat exchangers, moving from concept through test results within two weeks- Successfully led a team of multi-disciplinary engineers in an international search for the largest and most robust axial flow sea water pumps in the world- Oversaw several multi-disciplinary efforts and $millions to architect laboratories for multi-axis friction stir welding and advanced heat exchanger testing- Recommended custom tube enhancement that led to a 300% heat transfer coefficient increase- Drafted sound contract documentation to support unhindered contract execution including: technical specifications, statements of work, requests for information/quote/proposal, basis of estimate, proprietary information exchange agreements, test plans/procedures/reports and system requirements- Led a team of engineers in development of a custom total cycle Ocean Thermal Energy Conversion (OTEC) modeling tool utilizing various industry software resources and providing an intuitive interface for input and visualization of results
Norfolk, Virginia Area
- Successfully performed water flow computer simulations to select proper valves, pumps, pipes and fittings for water and waste water distribution networks using both KYPIPE and WaterCAD- Documented results of analysis including hand calculations to support simulation results and suggested system modifications and component selection- Performed cost analysis of future projects for various local governments through planimetry, takeoffs and RSMeans analysis- Assisted in survey of city, county, private and federal grounds including: pre-construction, storm water systems, parking lots, roads, and runways- Drafted a detailed landfill use report including 3D CAD estimates of usage, projections of landfill life and daily cover assessment and recommendations
97% Complete with Master's in Mechanical and Aerospace Engineering Coursework: Engineering Mathematics I, Statistics for Engineers.
Activities and Societies: Tau Beta Pi Engineering Honor Society, Project Manager - Biodiesel Graduated Magna Cum Laude Minor.
Activities and Societies: Motor Sports Club, Rugby
Quick answers generated from the profile data available on this page.
Eugene Jansen works for Thermal and Fluids Solutions Group, LLC.
Eugene Jansen is listed as President | Chief Engineer | Consultant at Thermal and Fluids Solutions Group, LLC.
AeroLeads has found 1 work email signal at @tfsg.us for Eugene Jansen at Thermal and Fluids Solutions Group, LLC.
AeroLeads has found 2 phone signal(s) with area code 703 for Eugene Jansen at Thermal and Fluids Solutions Group, LLC.
Eugene Jansen is based in Stafford, Virginia, United States while working with Thermal and Fluids Solutions Group, LLC.
Eugene Jansen has worked for Thermal And Fluids Solutions Group, Llc, Magnix, Lockheed Martin, and C. Allan Bamforth, Engineer-Surveyor, Ltd..
You can use AeroLeads to view verified contact signals for Eugene Jansen at Thermal and Fluids Solutions Group, LLC, including work email, phone, and LinkedIn data when available.
Eugene Jansen holds Master'S, Mechanical And Aerospace Engineering, 3.7 Gpa from University Of Virginia.
Eugene Jansen is listed with skills including Engineering, Thermal Analysis, Finite Element Analysis, Systems Engineering, Engineering Management, Mechanical Engineering, Testing, and Simulations.
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trial Search contactsCheck these profiles if this is not the Eugene Jansen you were looking for.
