Feras Abozaid Email & Phone Number
@tees.ac.uk
1 phone found area 745
LinkedIn matched
Who is Feras Abozaid? Overview
A concise factual answer block for searchers comparing this professional profile.
Feras Abozaid is listed as Senior Geotechnical Estimator at CAN, a with 586 employees, based in Newcastle Upon Tyne, England, United Kingdom. AeroLeads shows a work email signal at tees.ac.uk, phone signal with area code 745, and a matched LinkedIn profile for Feras Abozaid.
Feras Abozaid previously worked as Geotechnical Estimator at Can Ltd and Geotechnical Estimator at Aarsleff Ground Engineering Ltd. Feras Abozaid holds Master Of Science (Msc), Civil And Structural Engineering, Merit from Teesside University.
Email format at CAN
This section adds company-level context without repeating Feras Abozaid's masked contact details.
AeroLeads found 1 current-domain work email signal for Feras Abozaid. Compare company email patterns before reaching out.
About Feras Abozaid
I am a dedicated, enthusiastic and resourceful Civil Engineer, who graduated with a BEng in Civil Engineering and MSc in Civil and Structural Engineering at Teesside University. I am personable, hardworking and in my short career I have been able to communicate effectively and directly with colleagues, offering technical advice to solve problems.
Listed skills include Construction Management, Project Management, Construction, Autocad, and 17 others.
Feras Abozaid's current company
Company context helps verify the profile and gives searchers a useful next step.
Feras Abozaid work experience
A career timeline built from the work history available for this profile.
Geotechnical Estimator
Current
Geotechnical Estimator
• Responsible for preparation of tender enquiries from receipt to implementation.• Ensuring all tender returns meet the clients’ requirements.• Preparing tender design for piles, ground anchors, and soil nails.• Co-ordinating of other office based and site-based staff to assist in the tendering process.• Liaising and communicating with potential clients during the tender and pre award periods, includingattendance of meetings and technical queries.• Conducting site visits… Show more • Responsible for preparation of tender enquiries from receipt to implementation.• Ensuring all tender returns meet the clients’ requirements.• Preparing tender design for piles, ground anchors, and soil nails.• Co-ordinating of other office based and site-based staff to assist in the tendering process.• Liaising and communicating with potential clients during the tender and pre award periods, includingattendance of meetings and technical queries.• Conducting site visits when necessary to evaluate sites.• Compilation and appraisal of material and subcontract enquiries associated with the respective tender.• Production of tender price, programme and other required documentation required for each tender.• Review of tenders with the pre-construction director prior to submission.• Manage and chair department weekly winning meeting• Mange and chair bid / no bid estimators meeting.• Evaluate and filter opportunities prior to tendering stage. Show less
Project Engineer
• Part of the preconstruction phase of the project, preparing programme, producing AutoCAD drawings,reviewing design and construction specifications and ensuring all are within the ICE and British specsand standards. Reviewing boreholes data, liaising with subcontractors to be ready for the start of theproject.• Authoring site documentation including Method Statement and Risk Assessments, Inspection TestPlans and Task Briefing Sheets. Liaised with suppliers and conducted… Show more • Part of the preconstruction phase of the project, preparing programme, producing AutoCAD drawings,reviewing design and construction specifications and ensuring all are within the ICE and British specsand standards. Reviewing boreholes data, liaising with subcontractors to be ready for the start of theproject.• Authoring site documentation including Method Statement and Risk Assessments, Inspection TestPlans and Task Briefing Sheets. Liaised with suppliers and conducted trial tests to ensure materialmet quality standards.• Responsible for QA/QC at different work faces on site, ensuring the following work items conform tothe agreed site Inspection Test Plan: pile concrete pours, reinforcement cage inspection, sonic loggingtesting and grouting. Completing and submitting pile Records on a timely basis to the Client.Key Projects:• HS2 C2 C3 piling works– Contract Value £200m• Lockwood Beck Project – Contract Value £500K • NESS Energy Project, Aberdeen – Contract value £6m • 30Governor square Project, London – Contract value £5m Show less
Gradute Estimating Engineer
Project Engineer
• Responsible for QA/QC at different work faces on site, ensuring the following work items conform to the agreed site Inspection Test Plan: panel concrete pours, reinforcement cage inspection, KODEN checks, sonic logging testing and grouting.• Completing and submitting Panel Records on a timely basis to the Site Agents, for submission to the Client• Responsible for detailed daily shift reports. This requires liaising closely with Cutter Operators to ensure the newly-introduced B-Tronic… Show more • Responsible for QA/QC at different work faces on site, ensuring the following work items conform to the agreed site Inspection Test Plan: panel concrete pours, reinforcement cage inspection, KODEN checks, sonic logging testing and grouting.• Completing and submitting Panel Records on a timely basis to the Site Agents, for submission to the Client• Responsible for detailed daily shift reports. This requires liaising closely with Cutter Operators to ensure the newly-introduced B-Tronic Activity is filled out comprehensively and thus achieve successful implementation to the project.• Assisting with the As-built Generator filing system on an ongoing basis. This includes gathering and modifying B-Tronic, CIS, Frame Position and KODEN data into the correct format for processing to generate the 3-D model.• Responsible for construction activity management: Sonic loggings and cube strength results. Show less
Civil Engineer - Bentonite Tech
• Responsible for monitoring bentonite quality by sampling and testing by performing the following tests: Marsh funnel (viscosity), ball harp (shear strength), mud balance (density), filter press (filter cake and fluid loss), viscometer (viscosity), sand content, pH and water retention.• Responsible for monitoring bentonite loss both at the plant and at the panel.• Responsible for controlling bentonite quality by introducing additives such as LTA3, LTA16 and sodium bicarbonate. This… Show more • Responsible for monitoring bentonite quality by sampling and testing by performing the following tests: Marsh funnel (viscosity), ball harp (shear strength), mud balance (density), filter press (filter cake and fluid loss), viscometer (viscosity), sand content, pH and water retention.• Responsible for monitoring bentonite loss both at the plant and at the panel.• Responsible for controlling bentonite quality by introducing additives such as LTA3, LTA16 and sodium bicarbonate. This required calculations to determine the amount of additives required and the rate at which to add them, to prevent blockages and ensure proper mixing with the slurry requiring treatment.• Responsible for daily bentonite plant reports. As this project works on 24/7 basis, I held a handover meeting with the other Bentonite Technician at the start and end of each shift to ensure all information was passed on seamlessly.• Recording and filing of the Control Test Sheets and Daily Reports. Show less
Student Job - Student Ambassador
Responsibilities:• Support pupils in local schools and colleges as required through activities/events which may be on or off campus.• Assist in the development and delivery of widening participation and recruitment activities.• Assist in the operational set up and running of corporate events, to include greeting and signposting visitors on campus and assisting with visitor registration.• Assist in the delivery of subject specific activity for academic schools.
Short Term Contract - International Student Ambassador
Responsibilities:• Administration work withing the student services. • Welcoming the new students (induction days)• Helping in the orientation days with student services to complete registering the new students for instance, administration support, and registration with the police, GPs, accommodations and other procedures. • Organising Trips.
Summer Job - International Buddy
Responsibilities:• Welcoming the new students (induction days)• International Buddies work with the university supporting the new international students in many ways for instance, administration support, and registration with the police, GPs, accommodations and other procedures. • Organising Trips.• Organising and responsible for English Café’ session.
Summer Intern - Site Engineer
• Successfully coordinated and supervised items of works to ensure they were constructed as per the site drawings and to the Inspection Test Plan.• Worked closely with the design consultant team to optimise the programme and ease of construction.• Responsible for generating and continuously updating the rolling programme.
Assistant Site Engineer
Colleagues at CAN
Other employees you can reach at can.ltd.uk. View company contacts for 586 employees →
Shah Khan
Colleague at CanPakistan
View →
GW
Gavin Wood
Colleague at CanGreater Sheffield Area, United Kingdom
View →
KW
Kai Watson
Colleague at CanUnited Kingdom
View →
TL
Tom Lee
Colleague at CanRochdale, England, United Kingdom
View →
CL
Callum Laird
Colleague at CanInvermoriston, Scotland, United Kingdom
View →
ED
Edward De Winton
Colleague at CanKing'S Lynn, England, United Kingdom
View →
SC
Sean Cadogan
Colleague at CanRochester, England, United Kingdom
View →
MS
Michael S.
Colleague at CanGreater Sheffield Area, United Kingdom
View →
DR
David Rae
Colleague at CanUnited Kingdom
View →
JS
Jack Shaw
Colleague at CanGreater Sheffield Area, United Kingdom
View →
Feras Abozaid education
Master Of Science (Msc), Civil And Structural Engineering, Merit
Honours Degree In Bachelor Of Engineering (Beng), Civil Engineering, 2.1
Foundation Degree, Engineering
Secondry Education Certificate, Engineering And Sciences, 78%
Frequently asked questions about Feras Abozaid
Quick answers generated from the profile data available on this page.
What company does Feras Abozaid work for?
Feras Abozaid works for CAN.
What is Feras Abozaid's role at CAN?
Feras Abozaid is listed as Senior Geotechnical Estimator at CAN.
What is Feras Abozaid's email address?
AeroLeads has found 1 work email signal at @tees.ac.uk for Feras Abozaid at CAN.
What is Feras Abozaid's phone number?
AeroLeads has found 1 phone signal(s) with area code 745 for Feras Abozaid at CAN.
Where is Feras Abozaid based?
Feras Abozaid is based in Newcastle Upon Tyne, England, United Kingdom while working with CAN.
What companies has Feras Abozaid worked for?
Feras Abozaid has worked for Can, Can Ltd, Aarsleff Ground Engineering Ltd, Bauer Technologies Limited, and Teesside University.
Who are Feras Abozaid's colleagues at CAN?
Feras Abozaid's colleagues at CAN include Shah Khan, Gavin Wood, Kai Watson, Tom Lee, and Callum Laird.
How can I contact Feras Abozaid?
You can use AeroLeads to view verified contact signals for Feras Abozaid at CAN, including work email, phone, and LinkedIn data when available.
What schools did Feras Abozaid attend?
Feras Abozaid holds Master Of Science (Msc), Civil And Structural Engineering, Merit from Teesside University.
What skills is Feras Abozaid known for?
Feras Abozaid is listed with skills including Construction Management, Project Management, Construction, Autocad, Engineering, Project Planning, Microsoft Excel, and Team Leadership.
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trial