Hazem Eid Email & Phone Number

Egypt

Cairo, Egypt

working across FEEDs/Executes through to EPCM delivery

Cairo, Egypt

• Organize the work for the rotating and static supervisors for the Inspection and Preventive Maintenance.• Issue the MIR (Material Inspection Report) for material inspection at warehouse.• Ensure the installation of rotating and static equipment as per drawing and quality procedure.

Alexandria, Egypt

• Organize the work for the rotating and static supervisors for the Inspection and Preventive Maintenance.• Issue the MIR (Material Inspection Report) for material inspection at warehouse.• Ensure the installation of rotating and static equipment as per drawing and quality procedure.

Port Said, Bur Sa'Id, Egypt

• Participate and coordinate punch and MC activities with handover to commissioning team.• Coordinate all MC related activities using Company discipline engineers and inspectors.• Participate in area/system punch out and monitor the MC status in CCMS (completion tool).

Cairo, Egypt

• Job specification analyzes to determine the best execution method with best cost control.• Manage and supervise staff and subcontractor activities. • Handling site activities delays by recording and taking necessary actions.• Adhere to HSE rules and application at site.• Quick action decisions to avoid delays with work.

Suez, As Suways, Egypt

• Job specification analyzes to determine the best execution method with best cost control.• Manage and supervise staff and subcontractor activities. • Handling site activities delays by recording and taking necessary actions.• Adhere to HSE rules and application at site.• Quick action decisions to avoid delays with work.

Port Said, Bur Sa'Id, Egypt

• • Attend Package progressive inspections and Factory & Site Acceptance Testing.• Report package status progress including management of vendor schedules, cost, and variations.• Liaise between functions with the vendor and Company to provide updates, guidance, and resolution.• Act as a Mechanical focal point for small scopes covering weekly meetings, project updates, etc.• Input to construction work packs and technical support during installation and commissioning.• Review EPC Contractor submitted look-ahead schedules and advises the Construction Manager on activities start/finish deviations from the construction planning with a possible negative impact.• Review specification, shop drawings, MTO, and inspection.• Installation work for rotating equipment and its alignment (pumps, compressors, air coolers, etc.).• Installation work for static equipment and its internals.• Interface with contracted vendors to ensure timely resolution of problems. • Ensure equipment/skid is kept clean (no leaks).• Report step changes in noise, temperatures, pressures, flows, or vibration levels.• Raise work orders and ensure corrective actions progress.• Prepare and coordinate lifting study.• Follow up work from erection up to final acceptance (provide technical support and analyze problems).• Installation work for flare and packages.• PTW and HSE Standards in Oil & Gas and Petrochemical industries.• Pre-commissioning and commissioning works.• Follow up preventive maintenance, maintenance work for static equipment and its internals.• Make planning and preparation for shutdown work.

Port Said, Bur Sa'Id, Egypt

• Participate in/contribute to project workshops e.g., risk assessments, design reviews, constructability, HAZID, HAZOP, etc.• Communicate project safety standards, rules & regulations as captured in PMC/EPC Contractors HSSE plans/procedures to PMC/EPC Contractor teams.• Ensure work and quality related inspections are carried out in line with the PMC QMS and approved Inspection/Test Plans.• Review and approval of supplier documentation e.g., GA / ITP / Calculations and Fabrication Procedures.• Attend Package progressive inspections and Factory & Site Acceptance Testing.• Report package status progress including management of vendor schedules, cost, and variations.• Liaise between functions with the vendor and Company to provide updates, guidance, and resolution.• Act as a Mechanical focal point for small scopes covering weekly meetings, project updates, etc.• Input to construction work packs and technical support during installation and commissioning.• Review EPC Contractor submitted look-ahead schedules and advises the Construction Manager on activities start/finish deviations from the construction planning with a possible negative impact.• Review specification, shop drawings, MTO, and inspection.• Installation work for rotating equipment and its alignment (pumps, compressors, air coolers, etc.).• Installation work for static equipment and its internals.• Interface with contracted vendors to ensure timely resolution of problems. • Ensure equipment/skid is kept clean (no leaks).• Report step changes in noise, temperatures, pressures, flows, or vibration levels.• Raise work orders and ensure corrective actions progress.• Prepare and coordinate lifting study.

Damietta, Dumyat, Egypt

• Participate in/contribute to project workshops e.g., risk assessments, design reviews, constructability, HAZID, HAZOP, etc.• Communicate project safety standards, rules & regulations as captured in PMC/EPC Contractors HSSE plans/procedures to PMC/EPC Contractor teams.• Ensure work and quality related inspections are carried out in line with the PMC QMS and approved Inspection/Test Plans.• Review and approval of supplier documentation e.g., GA / ITP / Calculations and Fabrication Procedures.• Attend Package progressive inspections and Factory & Site Acceptance Testing.• Report package status progress including management of vendor schedules, cost, and variations.• Liaise between functions with the vendor and Company to provide updates, guidance, and resolution.• Act as a Mechanical focal point for small scopes covering weekly meetings, project updates, etc.• Input to construction work packs and technical support during installation and commissioning.• Review EPC Contractor submitted look-ahead schedules and advises the Construction Manager on activities start/finish deviations from the construction planning with a possible negative impact.• Review specification, shop drawings, MTO, and inspection.• Installation work for rotating equipment and its alignment (pumps, compressors, air coolers, etc.).• Installation work for static equipment and its internals.• Interface with contracted vendors to ensure timely resolution of problems. • Ensure equipment/skid is kept clean (no leaks).• Report step changes in noise, temperatures, pressures, flows, or vibration levels.• Raise work orders and ensure corrective actions progress.• Prepare and coordinate lifting study.

Doha, Qatar

• Participate in/contribute to project workshops e.g., risk assessments, design reviews, constructability, HAZID, HAZOP, etc.• Communicate project safety standards, rules & regulations as captured in PMC/EPC Contractors HSSE plans/procedures to PMC/EPC Contractor teams.• Ensure work and quality related inspections are carried out in line with the PMC QMS and approved Inspection/Test Plans.• Review and approval of supplier documentation e.g., GA / ITP / Calculations and Fabrication Procedures.• Attend Package progressive inspections and Factory & Site Acceptance Testing.• Report package status progress including management of vendor schedules, cost, and variations.• Liaise between functions with the vendor and Company to provide updates, guidance, and resolution.• Act as a Mechanical focal point for small scopes covering weekly meetings, project updates, etc.• Input to construction work packs and technical support during installation and commissioning.• Review EPC Contractor submitted look-ahead schedules and advises the Construction Manager on activities start/finish deviations from the construction planning with a possible negative impact.• Review specification, shop drawings, MTO, and inspection.• Installation work for rotating equipment and its alignment (pumps, compressors, air coolers, etc.).• Installation work for static equipment and its internals.• Interface with contracted vendors to ensure timely resolution of problems. • Ensure equipment/skid is kept clean (no leaks).• Report step changes in noise, temperatures, pressures, flows, or vibration levels.• Raise work orders and ensure corrective actions progress.• Prepare and coordinate lifting study.

Doha, Qatar

• Participate in/contribute to project workshops e.g., risk assessments, design reviews, constructability, HAZID, HAZOP, etc.• Communicate project safety standards, rules & regulations as captured in PMC/EPC Contractors HSSE plans/procedures to PMC/EPC Contractor teams.• Ensure work and quality related inspections are carried out in line with the PMC QMS and approved Inspection/Test Plans.• Review and approval of supplier documentation e.g., GA / ITP / Calculations and Fabrication Procedures.• Attend Package progressive inspections and Factory & Site Acceptance Testing.• Report package status progress including management of vendor schedules, cost, and variations.• Liaise between functions with the vendor and Company to provide updates, guidance, and resolution.• Act as a Mechanical focal point for small scopes covering weekly meetings, project updates, etc.• Input to construction work packs and technical support during installation and commissioning.• Review EPC Contractor submitted look-ahead schedules and advises the Construction Manager on activities start/finish deviations from the construction planning with a possible negative impact.• Review specification, shop drawings, MTO, and inspection.• Installation work for rotating equipment and its alignment (pumps, compressors, air coolers, etc.).• Installation work for static equipment and its internals.• Interface with contracted vendors to ensure timely resolution of problems. • Ensure equipment/skid is kept clean (no leaks).• Report step changes in noise, temperatures, pressures, flows, or vibration levels.• Raise work orders and ensure corrective actions progress.• Prepare and coordinate lifting study.

Alexandria, Egypt

Damietta, Dumyat, Egypt

• Participate in/contribute to project workshops e.g., risk assessments, design reviews, constructability, HAZID, HAZOP, etc.• Communicate project safety standards, rules & regulations as captured in PMC/EPC Contractors HSSE plans/procedures to PMC/EPC Contractor teams.• Ensure work and quality related inspections are carried out in line with the PMC QMS and approved Inspection/Test Plans.• Review and approval of supplier documentation e.g., GA / ITP / Calculations and Fabrication Procedures.• Attend Package progressive inspections and Factory & Site Acceptance Testing.• Report package status progress including management of vendor schedules, cost, and variations.• Liaise between functions with the vendor and Company to provide updates, guidance, and resolution.• Act as a Mechanical focal point for small scopes covering weekly meetings, project updates, etc.• Input to construction work packs and technical support during installation and commissioning.• Review EPC Contractor submitted look-ahead schedules and advises the Construction Manager on activities start/finish deviations from the construction planning with a possible negative impact.• Review specification, shop drawings, MTO, and inspection.• Installation work for rotating equipment and its alignment (pumps, compressors, air coolers, etc.).• Installation work for static equipment and its internals.• Interface with contracted vendors to ensure timely resolution of problems. • Ensure equipment/skid is kept clean (no leaks).• Report step changes in noise, temperatures, pressures, flows, or vibration levels.• Raise work orders and ensure corrective actions progress.• Prepare and coordinate lifting study.

Suez, As Suways, Egypt

• Participate in/contribute to project workshops e.g., risk assessments, design reviews, constructability, HAZID, HAZOP, etc.• Communicate project safety standards, rules & regulations as captured in PMC/EPC Contractors HSSE plans/procedures to PMC/EPC Contractor teams.• Ensure work and quality related inspections are carried out in line with the PMC QMS and approved Inspection/Test Plans.• Review and approval of supplier documentation e.g., GA / ITP / Calculations and Fabrication Procedures.• Attend Package progressive inspections and Factory & Site Acceptance Testing.• Report package status progress including management of vendor schedules, cost, and variations.• Liaise between functions with the vendor and Company to provide updates, guidance, and resolution.• Act as a Mechanical focal point for small scopes covering weekly meetings, project updates, etc.• Input to construction work packs and technical support during installation and commissioning.• Review EPC Contractor submitted look-ahead schedules and advises the Construction Manager on activities start/finish deviations from the construction planning with a possible negative impact.• Review specification, shop drawings, MTO, and inspection.• Installation work for rotating equipment and its alignment (pumps, compressors, air coolers, etc.).• Installation work for static equipment and its internals.• Interface with contracted vendors to ensure timely resolution of problems. • Ensure equipment/skid is kept clean (no leaks).• Report step changes in noise, temperatures, pressures, flows, or vibration levels.• Raise work orders and ensure corrective actions progress.• Prepare and coordinate lifting study.