John E. Smith Email & Phone Number

Assist Crane Operations

Dayton, Oh

Interacts with Customers, Route Salespersons, Warehouse, and Route Drivers on a daily basis.Receives customer orders; responds to customer issues; inspects orders to ensure accuracy; makes corrections as needed; sends orders to the warehouse for proper loading prior to delivery; creates customer invoices; and tracks deliveries as needed. Responds to short fused request from Salespersons, Route Drivers, and Customers. Coordinates between all.Uses "Route Center" data base driven software to Build next day delivery routes for drivers.Monitors product inventory, and ensures responsible parties are aware of low product situations so orders can be placed to replenish inventory.Assist in warehouse to include forklift operation as needed, delivers product to customers as needed.Interacts with Route Center software vendor to find new ways to complete work more efficiently based on Lean Management ideals. Located refurbished versions of the Handheld Scanners used by salespersons, to replace non-functioning scanners which caused hours of extra work each week. Ordered scanners, had scanner drop shipped to Software vendor, and provided shipping information for vendor to send scanners to company after software install.

Everett, Wa

Commercial driver subject to FMCSR, NHTSA, and FRA. On-Call Long Haul (long distance) Railroad Crew driver. Picked up RR crews where they needed to be picked up, and dropped them off where they needed to be dropped off.This job required a Commercial Driver Physical, but did not require a CDL, vehicles were Commercial Vehicles with Dot numbers.Trips lasted as little as one hour, or as many as 10.Crossed border into Canada routinely (and during Covid).Obtained assignment. Conducted Vehicle Inspection prior to start of trip, and at end of trip. Notated any discrepancies, or notified supervisor if vehicle needed to be placed out of service. Used IVR, and later APP to update trip information.Completed many safety training courses. Safety was paramount.

Omaha, Nebraska, United States

On site Service Technician repairing Grocery Carts, and back room Material handling carts.Inspected Service Truck on daily basis.Ensured Service truck was properly stocked with parts, ordered, and obtained necessary parts, hardware, and tools.Checked in at scheduled service location. Inventoried all service items.Performed service on items in need of repair.Washed items as requested, or required according to contract.Filled out Billing Invoice, and presented to Customer.Filled out, and transmitted daily, and weekly reports to company headquarters.

Woodinville, Washington, United States

Safe and efficient operation of CDL flat-bed tractor trailer delivering steel roofing materials to retailers, wholesalers, and construction sites in Puget Sound region.Conducted daily truck safety inspection in accordance with FMCSA guidelines.Ensured proper securement of load on flatbed trailer with straps in correct number, spacing, and weight rating.Safe operation of truck mounted crane, standard forklift, and Moffett "Piggy Back" forklift to off-load products at job sites. Operation of forklift at company yard as needed.Use of mechanical knowledge, and tools to purchase parts, and make repairs to company fleet trucks as needed.Knowledge of sheet metal work used to assist in metal shop when requested.Carpentry skills used to create special crates, and pallets for metal products.Reviewed paperwork, scheduled route, and pre-loaded products prior to departure to ensure quality product delivery.Safety in all aspect of job. Ensured proper use of PPE; three points of contact mounting, and dis-mounting truck, and equipment. Awareness of slip, trip, fall hazards; road hazards; pinch, crush dismemberment hazards.

Everett, Wa

Part time work for various employers servicing equipment, welding, and CDL driving.Beach Street Topsoil - Completed Heavy Wet Services on trucks, and yard loaders. Repaired yard loaders. This saved the company the expense of a more costly repair, or replacement of equipment.Local Weld Shop - Serviced equipment; cut and tacked up projects; made weld repairs.Local Concrete Company - operated Class A CDL tilt deck low-boy to move curbing machine to, and from worksite, and to service dealer. This temporary assistance allowed a local concrete company to get their jobs done in a period when they had no regular driver, allowing them to keep their contracts worth thousands of dollars.Team Driving to Anchorage, and Kenai Alaska from Seattle, WA via Alaska Highway, and back to Seattle in February. This was to try out team driving to Alaska and back via the ALCAN each week.Operated tilt-deck low-boy moving small to heavy rental equipment from rental yards to customers at all types of locations via low boy, allowing rental companies to run efficiently.Drove Tilt Deck Low Boy hauling all types and sizes of rental equipment as an employee of a sub-contractor for a major national rental company. Completed Heavy Wet Services of Trucks, and Yard Loaders for local Topsoil and Gravel Company. Completed repairs on yard loaders, and performed welding projects. Operated Heavy articulated loader for local farming operation.

Everett, Wa

HAZMAT DRIVER. Safely operate Class A CDL truck with GVW of 80,000 to transported Specialized Hazardous, and Non-Hazardous Waste within the United States, and Canada.Inspected truck at beginning, and end of day to ensure compliance with FMCSA regulations, and general safety and maintenance of vehicle.Normally pulled 53 foot roll off "Dragon" trailer, straight roll off truck, or straight roll off truck with pup trailer..Safely load, and off load, and empty contents of waste containers at designated waste facilities.Transported Tankers containing Hazardous Waste Chemicals from Billings, MT to Houston, TX.Transported drop deck flat bed loads of strapped, and chained items such as rail road wheels, and buoys to Coast Guard terminal Seattle.

Everett

Inventory, Organization, Repair, and Preparation of waste bins of sizes in range from 20 to 40 cubic yards. Weekly inventory of all waste bins on site. Complete repair, and welding of bins including repair of holes in steel, tracks, hinges, removal and installation of doors, door gaskets, lids, lid gaskets, wheels, springs, chains, binders, ratchets, cargo straps, and tarps. Inventory of repair parts and materials, and re-order of supplies, and parts as necessary. Fabrication, and welding of parts, and bins as needed. Lining of bins with 3mil, 8mil, felt, and screen liners. Clean out of bins, and inter-modal containers. as necessary. Painting of bins. Use of CAT 930 loader to load, unload, move, and stack inter-modal containers. Use of forklift to move bins, unload delivery trucks, load trucks, and move items as necessary. Pressure washing of vacuum tankers. Fabrication of items for yard, and shop. Operation of tractor trailers to load, move, and unload roll of bins. Operation of company vehicles to pick up parts as needed. Assist truck mechanic as needed.

Snohomish, Wa

Construction Equipment Oiler. Operated 80,000 GVWR Class A CDL HAZMAT Fuel and Fluids truck. Checked fluid levels on yellow iron from small excavators and CAT D-3's up to Hitachi 450 excavators and CAT D-9 Dozers. Fueled equipment, filled fluids to proper level, Greased equipment. Performed Heavy Wet services. Cleaned air filters. Performed troubleshooting on non-running equipment. Operated all equipment to reposition, or relocate on construction site. Familiar operating all pieces of and types of heavy equipment found on a land development site.

Marysville, Washington, United States

This was temporary employment provided by a friend, and business owner I had worked for previously, while I was looking for a full time job.Fabrication, and Welding. Heavy Truck, and Loader Maintenance. General Labor, and Yard Assistance as needed.

Everett, Wa

Fabrication, and welding in heavy truck shop. Also, was learning to perform other types of mechanical work on heavy trucks. Put in 100% every day, and did not allow anything sub-standard to go out with my name, or my companies name on it.Fabricated receivers, anchor plates, brackets, and other items as needed. Repaired broken, and cracked welds in truck, and trailer frames. Repaired broken hydraulic ram mounts on dovetail lowboy. Installed Wet kits including tank, PTO, hydraulic pump, valve, filter, and hoses. Performed DOT inspections; wet service; brake repair, and installation; repair estimates; ordered parts. Installed, and moved drop axles. Installed asphalt gates. Repaired, and installed lift gates, dock bumpers, and steps. Worked on roll up doors, and truck box roofs. Installed Hy-rail sensors, and wheels on rail-road vehicles. Installed, wired, and repaired truck, and trailer lights. Road tested Class A trucks and smaller after repair. Picked up, and delivered customer trucks.

Everett, Washington, United States

Substitute on-call as needed custodian, average 24 or more hours per week.Responsible to building cleanliness, and security.Duties include, trash, sweeping, vacuuming, mopping, cleaning restrooms, and any additional items as needed, or requested.

Accurate Sheet Metal

Welded mild steel, aluminum, and stainless steel using GTAW, and SMAW process. Operated Manual Mill; Manual Lathe; Press Brake; Punch Press; Sheer; Tap Drill.Operated Okuma CNC Vertical Milling Machine Operator, followed blue prints in shop work packages to set up vises, and jigs to hold parts accurately, and securely. Reset 0 point on mill for each new part. Changed, and touched off tools. Completed initial part run, and had part buy off completed. Inspected all parts. De-burred parts as needed. Inspected machine daily, cleaned cooland screens, greased machine, added coolant as needed.Worked with mild steel, galvanized steel, stainless steel, tin plated copper, copper, and aluminum.Laid off from this employer.

Senior Aerospace

Operated Mori Seiki Horizontal CNC. Familiar with running 5 different parts. Followed blue prints in work package each day to check for any changes made to milling procedures. Normally ran 1 part through 4 operations on one CNC. ran up to 96 parts per day. Measured, and inspected all parts to within one thousand of an inch (.XXX). Ran up to two machines at once. Took over running different parts on different CNC's as needed.

Maintained 40,000 square foot heavy truck repair facility.- Repaired anything that needed to be repaired in the building, or on the grounds, or made best possible attempt before calling in any outside assistance.- Maintained boilers burning recycled oil for heat; steam cleaner and associated boiler; heated parts washer; solvent parts cleaners; lube lines and guns; oil transfer and holding tanks; air filtration and ventilation. Rebuilt pneumatic pumps for oil and grease.Maintained in house waste water treatment system, sampled water, adjusted chemicals, cleaned electrolysis cell, performed flow adjustment, and plumbing task. Cleaned, and adjusted oil water separator, and waste water holding tanks. Used MIG welding to repair items in shop, fabricate items such as racks, and create impromptu tooling for mechanics.Performed janitorial services to maintain facility cleanliness, and appearance.As CDL driver, picked up, and delivered truck between customers, other dealerships, and auctions. Picked up, and dropped off customers, and parts as needed.Operated forklift.

Managed daily operations of gravel yard. Operated Case 580, and Ford construction loaders to Load customer vehicles. Completed, and accounted for financial transactions. Ordered required materials. Maintained yard, and Loaders. Assisted customers via telephone. Dispatched delivery drivers. Ensured safe operations in yard.This was seasonal employment, and I still work for this employer occasionally on as needed basis when requested by employer.

The United States, 3 Different Countries, And Several Oceans.

Supervision, Administration, Intelligence, Security, Firefighting, and Damage Control.- Accountability: Responsible for millions of dollars worth of critical land, and ship based equipment, including structural buildings, mechanical systems, electronic/computer, ventilation systems, classified/sensitive records, weapons, and cash(up to 4Million). Maintained detailed records, and accounting for all items. - Journeyman Level intelligence reporting and analysis. Performed fusion analysis, and reported critical time sensitive information to National Level decision makers.- Emergency Response Equipment Preventive Maintenance System Manager: Trained, supervised, and inspected 30 personnel in the completion of scheduled maintenance on 200 critical emergency response, damage control, and fire fighting components, as well as routine house-keeping items. Ensured proper adherence to occupational safety, and health procedures including HAZMAT, SDS, electrical safety, PPE, respirators, confined space entry, and equipment tag out/lock out procedures. Ordered all necessary supplies, and repair parts.- Trained up to 85 personnel at once in Fire Fighting, and Emergency Response.- Supervised 20 person Naval Police Security Force. Responsible for duty assignments, and accountability of weapons, and documents.- CPR/First Aid Instructor, certified over 300 personnel.- Wrote Performance Evaluations for up to 20 personnel. Also, completed award recommendations; positive, and negative counseling statements, and disciplinary paperwork to send 2 individuals to ships Brig.

Associates Of Technical Arts, Advanced Mfg Technology, Technical Design, Cad/Cadd Drafting And/Or Design Technology/Technician

AUTO CAD, CATIA, SOLID WORKS, REVIT

Associates Of Technical Arts, Welding Engineering Technology

Activities and Societies: AWS, ASME