Jonathan Croft Email & Phone Number
@epsgroupaustralia.com.au
LinkedIn matched
Who is Jonathan Croft? Overview
A concise factual answer block for searchers comparing this professional profile.
Jonathan Croft is listed as E and I Maintenance Technician at Lochard Energy, a with 117 employees, based in Victoria, Australia. AeroLeads shows a work email signal at epsgroupaustralia.com.au and a matched LinkedIn profile for Jonathan Croft.
Jonathan Croft previously worked as E&I Maintenance Technician at Lochard Energy and Supervisor Electrical/EEHA, Instrumentation & Control at Adx Electrical. Jonathan Croft studied at ✰ Certificate Iv In Instrumentation And Control.
Email format at Lochard Energy
This section adds company-level context without repeating Jonathan Croft's masked contact details.
AeroLeads found 1 current-domain work email signal for Jonathan Croft. Compare company email patterns before reaching out.
About Jonathan Croft
I am an Electrical, Instrumentation and Control (EI&C) Technician with +15 years’ experience on Greenfield and Brownfield construction, CSU and maintenance projects across the Upstream and Downstream oil and gas, manufacturing, civil infrastructure and commercial sectors, within Australia. I specialise in the installation, inspection, commissioning, start-up and preventative, reactive and shutdown maintenance of a wide range of E&IC systems and equipment used to power, control and safeguard continuous LNG, CSG, minerals, water, pharmaceuticals, dairy and wood processing facilities. And I hold additional hands-on experience working on telecommunications exchanges, transport infrastructure, commercial buildings and residential apartments.Key Areas of Expertise:☛ Installation, CSU, termination, calibration, diagnostics, testing &/or maintenance of a wide range of EI&C systems & equipment including temperature, level, pressure, flow & density transmitters & detectors, pumps, valves, cabling, general power & lighting, switchboards & substations, as well as VSD’s, MCC’s, PLC’s, DCS, & HV switching☛ Installation, maintenance & detailed inspection of Ex rated equipment in Hazardous Areas, QA/QC of punch listed items, redlining drawings, compilation & verification of dossiers (including HA), gl&ing & termination of multicore, instrumentation & power cables, & the reading & interpretation of schematics, floor plans & P&ID’s☛ Strong work ethic, well-developed written & verbal communication skills, continuous improvement focused & excellent planning & organisational proficiency☛ Combines industry knowledge with a professional approach to build solid relationships with multiple internal & external interfaces, ensuring clear underst&ing of project objectives, & enabling a coordinated approach to all work tasks ☛ Detailed working knowledge of PTW, isolations & LOTO systems & procedures, & dedicated Senior Permit Authority & PTW Officer experience.
Listed skills include Electricians, Construction, E&I, Hazardous Areas, and 19 others.
Jonathan Croft's current company
Company context helps verify the profile and gives searchers a useful next step.
Jonathan Croft work experience
A career timeline built from the work history available for this profile.
E&I Maintenance Technician
Supervisor Electrical/Eeha, Instrumentation & Control
E&I Maintenance Technician & Instrumentation/Control Apprentice
Seconded from ADX to Leahy’s, core role responsibilities include (but are not limited to):► Installation of 3 phase DOL pumps, solenoid valves, mag flow meters, Coriolis flow meters and various other electrical, instrumentation, and control (EI&C) equipment, as well as performing preventative maintenance and shutdown upgrades in Hazardous and Non-Hazardous Area’s► Working efficiently within site Permit to Work (PTW), isolation and Lock Out/Tag Out (LOTO) systems and procedures to ensure equipment and systems are safe to work on, and effectively returned to service► Maintaining diligent compliance with Health, Safety, Environmental and Quality (HSEQ) policies and procedures to ensure the safety of self, colleagues and the equipment being worked with► Analysing potential risks to people and plant prior to starting work activities to identify and control hazards.
Leading Hand (Electrical/Eeha) & Instrumentation/Control Apprentice
► Coordinating and leading the work crew in the provision of preventative and reactive maintenance tasks, and project works, including the installation of various instrumentation including level, flow, pressure, temperature transmitters and chromatographs, and Electrical Equipment in Hazardous Areas (EEHA) such as lighting and motors► Commissioning and calibration of new instrumentation, electrical installations including 5 point checks, sensor trims and configurations, and performing Hazardous Area E&I inspections and rectification works► Creating PTW applications, and coordinating daily works with the Shift Responsible Officer and Operations personnel► Performing scheduled inspections and rectification punch list works on plant and equipment during planned outages► Acting Electrical Supervisor to provide for leave coverage, and lodging Certificates of Electrical Safety.
Senior Permit Authority - Commissioning & Start Up (Csu) Team
► Attending and/or chairing PTW/SIMOPS meetings with the client to coordinate permit applications with planned works in relation to current plant status, Operations process targets and adjacent work groups► Issuing PTW’s to Permit Holders ensuring conditions of PTW, relevant isolations and JSEA’s were fully understood and in accordance with PTW procedures► Chairing daily pre-start meetings with the PTW Isolation crew to discuss planned works such as isolations and site checks► Reviewing PTW applications, isolation requests for HV/LV electrical, mechanical and process, and relevant JSEA’s► Attending Operations daily pre-start meetings to ensure understanding of the status of the plant► Daily data entry into the computer based PTW Register.
Hv Electrician & Ptw Officer
⇨ Dec 2014: Electrician/HV Switching - AKD Softwoods Colac (VIC) ► Working on an upgrade to the HV switch room, involving the installation of an additional HV RMU► Installation, termination and assisting in the testing of HV Cables► Developed and executed the HV Switching Program.⇨ June 2014 - Dec 2014: PTW Officer/Isolator (Safe Transition to Operations/CSU Team) - APLNG Condabri Water Treatment Facility ► Working on the Origin Energy’s APLNG Upstream project (specifically their Condabri Water Treatment Facility in QLD), preparing electrical isolation certificates, and performing numerous electrical and mechanical plant and process isolations► Preparing permits and performing site checks for field activation of high risk activities such as hot works near the chloramination plant and chemical storage tanks, and supporting commissioning personnel with test runs► Issuing PTW’s in accordance with PTW procedures, performing PTW audits in the field, and providing training to contractors on PTW procedures.⇨ Apr 2014 - June 2014: HV Electrician - for Thiess on QGC’s QCLNG Upstream Project - Woleebee Creek & Jordan (CPP’s)► HV commissioning and pre-commissioning activities on the Woleebee Creek and Jordan Central Processing Plants (CPP’s)► Active member of the Commissioning Team which successfully commissioned and energized the 132kV switchyard► Assisting HV Technicians with VLF and Tan Delta testing using Omicron testing equipment► Performing works safely and efficiently under the HV PTW system.
Electrician
► Administration MCC switchboard room change over.
Electrician
► Installation and termination of various E&I circuits for the new butter packing line, box formation conveyor, and stretch wrapper, as well as numerous installations on 4 different milk driers including 3 phase motors, VSD’s, light and power, PLC’s and instrumentation► Trouble-shooting instrument and PLC faults in collaboration with Plant Operators using SCADA.
Electrician
► Re-wiring and replacement of smoke and fire damaged electrical cabling.
Overseas Travel To Europe
Electrician
► Installation and termination of various Hazardous Area E&I cabling (including IS and non-IS), as well as terminations on VSD and DOL motors, instrumentation, Distributed Control System (DCS), lighting and power► Executing and documenting QA and Hazardous Area inspections, and rectification of punch list itemsCommissioning of various instrumentation in conjunction with on-site engineers.
Electrician
► Installation and termination of the main supply from transformer, as well as overseeing and performing installations and terminations of switchboards and cabling in the MCC.
Electrician
► Employed with Thiess from May 2010 until October 2011, then moving across to Downer Edi Engineering until completion of the project, was responsible for the installation and termination of various temporary construction wiring for applications including (but not limited to) gensets, DB’s and DB supply feeds, crane feeds, lighting and power► Installation of fiberglass cable trays and HV cable supports, pulling cables and using the capstan winch► Executing and documenting QA inspections, and rectifying punch list items► Terminating of various instrumentation.
Ha Electrical Tech
► Employed with Downer EDI from September 2009 until March 2010, then moving across to ADX E&I for the remainder of the project, was responsible for the installation and termination of mains cable to the MCC, as well as commissioning of various motors, instruments and DCS/PLC panels in preparation for start-up ► Field motor and instrument SWA terminations including IS and non-IS in Hazardous Areas, as well as the installation of numerous Ex e and Ex d rated glands► Cable pulls and installation of cable support systems such as trays, performing and documenting QA and HA inspections, and rectifying punch list items.
Electrician
⇨ CSR Gyprock Project - Yarraville ► Installation of cables and cable trays, conducting field instrument terminations, and VSD terminations in the MCC.⇨ Iluka Mineral Sands - Hamilton Shutdown► Installation of new E&I circuits and cable trays, terminating VSD’s and other new I&E equipment in the field and in MCC’s, as well as performing QA inspections, completing associated documentation, and rectifying punch list items.⇨ Iluka Mineral Sands - Douglas Shutdown ► Pre-shut works including (installing lighting, power and data on a Brownfields site), HV earth grid installations, and shutdown works including the relocation of process plant and equipment, and the disconnection and reconnection of mains, motors, conveyors, instruments, lighting and power.
Electrician
► Installation of various E&I circuits, and conducting a wide range of terminations in throughout the food processing facility including VSD and DOL motors and isolators, and various analogue and digital instrumentation.
Electrician
► Australian Paper - Maryvale Wood Yard► East Link Transport Project - Melbourne.
Electrician
Electrical Apprenticeship
► Jan 2006 - June 2007: Corke Electrical - Otway Gas Project (Port Campbell)► June 2005 - Dec 2005: Elecraft - Royal Domain Apartments (South Melbourne)► Jan 2005 - May 2005: Bell Technology - Melbourne MFB► Jan 2004 - Dec 2004: Prolec - Water Gate Apartments (Docklands Melbourne)► Mar 2003 - Dec 2003: Newscom - Bio 21 Building (Melbourne University).
Colleagues at Lochard Energy
Other employees you can reach at lochardenergy.com.au. View company contacts for 117 employees →
Karl Anderson
Colleague at Lochard EnergyVictoria, Australia
View →
RH
Rohan Horsley
Colleague at Lochard EnergyGreater Melbourne Area, Australia
View →
GT
Giles Toler
Colleague at Lochard EnergyMelbourne, Victoria, Australia
View →
SW
Samantha Whittam
Colleague at Lochard EnergyPort Campbell, Victoria, Australia
View →
SE
Shane Eden-Jones
Colleague at Lochard EnergyVictoria, Australia
View →
WT
Warren Taylor
Colleague at Lochard EnergyCarlton, Victoria, Australia
View →
RH
Rod Harris
Colleague at Lochard EnergyGreater Melbourne Area, Australia
View →
DS
David Smith
Colleague at Lochard EnergyGreater Melbourne Area, Australia
View →
CH
Christopher Holloway
Colleague at Lochard EnergyGreater Melbourne Area, Australia
View →
CM
Christopher Madden
Colleague at Lochard EnergyVictoria, Australia
View →
Jonathan Croft education
Education record
Electrical (Installation, Maintenance And Detailed Inspection
Education record
Education record
Frequently asked questions about Jonathan Croft
Quick answers generated from the profile data available on this page.
What company does Jonathan Croft work for?
Jonathan Croft works for Lochard Energy.
What is Jonathan Croft's role at Lochard Energy?
Jonathan Croft is listed as E and I Maintenance Technician at Lochard Energy.
What is Jonathan Croft's email address?
AeroLeads has found 1 work email signal at @epsgroupaustralia.com.au for Jonathan Croft at Lochard Energy.
Where is Jonathan Croft based?
Jonathan Croft is based in Victoria, Australia while working with Lochard Energy.
What companies has Jonathan Croft worked for?
Jonathan Croft has worked for Lochard Energy, Adx Electrical, Adx Electrical & Instrumentation, Eps Group Australia, and West Tech Electrical.
Who are Jonathan Croft's colleagues at Lochard Energy?
Jonathan Croft's colleagues at Lochard Energy include Karl Anderson, Rohan Horsley, Giles Toler, Samantha Whittam, and Shane Eden-Jones.
How can I contact Jonathan Croft?
You can use AeroLeads to view verified contact signals for Jonathan Croft at Lochard Energy, including work email, phone, and LinkedIn data when available.
What schools did Jonathan Croft attend?
Jonathan Croft studied at ✰ Certificate Iv In Instrumentation And Control.
What skills is Jonathan Croft known for?
Jonathan Croft is listed with skills including Electricians, Construction, E&I, Hazardous Areas, Gas, Qa, Pharmaceutical Industry, and Commissioning.
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trialCheck these profiles if this is not the Jonathan Croft you were looking for.
View similar profiles