AeroLeads people directory · profile

Jonathan Slater Email & Phone Number

RF Product Design Engineer at Molex
Location: Livonia, Michigan, United States 10 work roles 2 schools
1 work email found @emagtech.com LinkedIn matched
✓ Verified August 2026 4 data sources Profile completeness 100%

Contact Signals · 1 work email

Work email j****@emagtech.com
LinkedIn Profile matched
3 free lookups remaining · No credit card
Current company
Molex
Role
RF Product Design Engineer
Location
Livonia, Michigan, United States
Company size
13468 employees

Who is Jonathan Slater? Overview

A concise factual answer block for searchers comparing this professional profile.

Quick answer

Jonathan Slater is listed as RF Product Design Engineer at Molex, a with 13468 employees, based in Livonia, Michigan, United States. AeroLeads shows a work email signal at emagtech.com and a matched LinkedIn profile for Jonathan Slater.

Jonathan Slater previously worked as Senior RF Engineer at Emag Technologies Inc. and Lead RF Engineer at Rf Bistatics, Inc.. Jonathan Slater holds Master'S Degree, Electrical Engineering -- Ic And Vlsi from University Of Michigan.

Company email context

Email format at Molex

This section adds company-level context without repeating Jonathan Slater's masked contact details.

{first_initial}{last}@emagtech.com
86% confidence

AeroLeads found 1 current-domain work email signal for Jonathan Slater. Compare company email patterns before reaching out.

View email format View company profile Management contacts
Profile bio

About Jonathan Slater

Analog/RF circuit design | Hardware engineer | Electronics

Listed skills include Analog Circuit Design, Rf Circuits, Cadence Virtuoso, Electronics, and 15 others.

Current workplace

Jonathan Slater's current company

Company context helps verify the profile and gives searchers a useful next step.

Molex
Molex
RF Product Design Engineer
Howell, MI, US
Website
molex.com
Employees
13468
AeroLeads page
Company profile
View company profile Email format
10 roles

Jonathan Slater work experience

A career timeline built from the work history available for this profile.

Rf Product Design Engineer

Molex

Howell, Mi, Us

Senior Rf Engineer

Emag Technologies Inc.

Ann Arbor, Michigan, Us

- Phased array hardware development (antenna, TR module, beamformer, power supply)

Lead Rf Engineer

Rf Bistatics, Inc.

- developed an Up/Down converter for a prototype 1 GHz synthetic aperture radar

Nov 2021 - Nov 2022

Rf Systems Engineer

Orbital Effects

Ann Arbor, Michigan, Us

May 2021 - Nov 2021

Radio Frequency Design Engineer

Harada Industry Of America, Inc.

Tokyo, Jp

Board level LNA design: AM, FM, DAB, GNSS, SDARS, RKE, etc.RF design and testing for automotive applications: GNSS, SDARS, V2X, AM, FM, and DAB

Nov 2019 - May 2021

Design Engineer

Analog Devices

Wilmington, Ma, Us

Jul 2018 - Jan 2019

Graduate Student Instructor

University Of Michigan

Ann Arbor, Michigan, Us

Graduate Student Instructor for EECS 413: Monolithic Amplifier Circuits (Analog Integrated Circuits)- Held office hours and review sessions- Taught lab sessions - Familiarized students with Cadence software- Offered assistance on homework and projectsGraduate Student Instructor for EECS 511: Analog-Digital Interface Circuits- Held office hours - Graded homework projects and lab assignments

Aug 2017 - Apr 2018

Rf Design Intern

Skyworks Solutions, Inc.

Irvine, California, Us

I worked on LNAs that are used in the front-end modules in cell phones.Project: LNA DesignI worked on an LNA size and cost reduction project. Given an existing LNA, I simplified it to reduce die area and cost all while designing to meet key specifications: input return loss, output return loss, gain, reverse isolation, noise figure, and linearity. The LNA accommodated numerous LTE frequency bands as well as several gain modes. Other skills gained:- taking measured S-parameter data and designing a matching network for optimum noise or gain - knowledge of LNA linearization techniques- real world LNA design- modern cell phone architecture (Antenna to DSP)

May 2017 - Aug 2017

Engineering Co-Op Ii

Denso

Southfield, Michigan, Us

I worked on instrument clusters and HUDs for automotive customers (Ford, GM, and Toyota).Daily Tasks:- soldering - measurements with oscilloscopes and multimeters - fire hazard testing for instrument clusters- assemble BOMs and order parts- assemble wire harnesses- aid engineers with various tasksProject: Power Supply Load TesterI was tasked with designing a circuit which could periodically switch-in various forms of resistive and reactive loads. This tester was used to determine the ruggedness of an instrument cluster's power supply design.

Nov 2014 - Dec 2015
Team & coworkers

Colleagues at Molex

Other employees you can reach at molex.com. View company contacts for 13468 employees →

HB Hau Bui Hau Bui Colleague at MolexVietnam, Viet Nam View → SW Susan Wyant Susan Wyant Colleague at MolexClearwater, Florida, United States View → VM Victor Mitchell Victor Mitchell Colleague at MolexLondon, Canada Metropolitan Area, Canada View → KO Khairi Omar Khairi Omar Colleague at MolexPenang, Malaysia View → OC Osiris Callahan Osiris Callahan Colleague at MolexDetroit Metropolitan Area, United States View → VY Vincent Yap Vincent Yap Colleague at MolexChengdu, Sichuan, China View → LZ Lily Zheng Lily Zheng Colleague at MolexChengdu, Sichuan, China View → WQ Wp Qin Wp Qin Colleague at MolexChengdu, Sichuan, China View → FC Fernando Contreras Fernando Contreras Colleague at MolexSan Pedro Tlaquepaque, Jalisco, Mexico View → SG Sindhu Gopinath Sindhu Gopinath Colleague at MolexBengaluru, Karnataka, India View →
2 education records

Jonathan Slater education

Master'S Degree, Electrical Engineering -- Ic And Vlsi

University Of Michigan

Bachelor'S Degree, Electrical Engineering

Lawrence Technological University
FAQ

Frequently asked questions about Jonathan Slater

Quick answers generated from the profile data available on this page.

What company does Jonathan Slater work for?

Jonathan Slater works for Molex.

What is Jonathan Slater's role at Molex?

Jonathan Slater is listed as RF Product Design Engineer at Molex.

What is Jonathan Slater's email address?

AeroLeads has found 1 work email signal at @emagtech.com for Jonathan Slater at Molex.

Where is Jonathan Slater based?

Jonathan Slater is based in Livonia, Michigan, United States while working with Molex.

What companies has Jonathan Slater worked for?

Jonathan Slater has worked for Molex, Emag Technologies Inc., Rf Bistatics, Inc., Orbital Effects, and Harada Industry Of America, Inc..

Who are Jonathan Slater's colleagues at Molex?

Jonathan Slater's colleagues at Molex include Hau Bui, Susan Wyant, Victor Mitchell, Khairi Omar, and Osiris Callahan.

How can I contact Jonathan Slater?

You can use AeroLeads to view verified contact signals for Jonathan Slater at Molex, including work email, phone, and LinkedIn data when available.

What schools did Jonathan Slater attend?

Jonathan Slater holds Master'S Degree, Electrical Engineering -- Ic And Vlsi from University Of Michigan.

What skills is Jonathan Slater known for?

Jonathan Slater is listed with skills including Analog Circuit Design, Rf Circuits, Cadence Virtuoso, Electronics, Public Speaking, Communication, Teaching, and Problem Solving.

Find 750M verified contacts

Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.