Lucas De Jesus Email & Phone Number

Ribas Do Rio Pardo, Mato Grosso Do Sul, Brasil

Duque De Caxias, Rio De Janeiro, Brasil

Responsible for maintaining, installing, and repairing instruments in the heating systems in the boilers.Performing tests in burner flame sensors, flame sensing, several types of thermocouples, and transmitters.Boiler interlock test, loop test, On-Off valve dissembling, assembling, test, etc.

Jacareí, São Paulo, Brasil

Working on the fiber line retrofit at Suzana's factory. Carrying out tests for the implementation of two Andritz DDWs.

Telêmaco Borba, Paraná, Brasil

Running tests on a bunch of instruments for the Andritz Drum Displacer Washer system, bleaching, Cooking and what else is needed on the Fiberline;

Paso De Los Toros, Tacuarembó, Uruguay

Performing loop check in several types of instruments including Pressure Transmitter, Level Transmitter, Flow Transmitter using Hart 475, Trex and Fluke generators.Continuity test for primary cables and secondary cables.Responsible for testing of various valves, including ball valves, gate valves, butterfly valves, safety relief valves, etc.Follow all.

Paulínia, São Paulo, Brasil

Responsible for all installations of skinpoint temperature elements within the furnace, perform loop testing of transmitters.Performing tasks related to maintenance and operations for the Petrobras team in the coke plant.Working inside the Furnace, removing, installing and testing skinpoint thermocouples.Performed loop test on temperature equipment for the.

São José Dos Campos, São Paulo, Brazil

As an instrumentation technician, I checked and adjusted damper controls and photoelectric sensors in heating and furnace systems. Adjusting knobs, switches, valves, and index arms to control process variables such as pressure, level, temperature, and flow.Calibrated and bench-tested various types of transmitters, etc.

Aripuanã, Mato Grosso, Brazil

Work under outsourcing contract for Nexa plant in Aripuanã.Commissioning of FLSmidth thickeners for copper, zinc, and lead.Performed maintenance, troubleshooting, upgrading and calibration of pneumatic and electronic instruments. Mesh test, cable pulling, assembly, disassembly, and repair.Parameterization, calibration and configuration of Endress Hauser.

Duque De Caxias, Rio De Janeiro, Brasil

Replacement and testing on multipoint thermocouples to monitor temperature in the reactor and converse for the 1250 unit in Reduc.Calibration and testing of Smar transmitters.calibration of several gas analyzers.Maintenance on rotary and linear valvesIdentified issues by testing and troubleshooting instruments, components and assemblies.

Paulínia

As a technician, I calibrated, installed, repaired, and inspected production equipment and monitoring devices. I was responsible for replacing several furnace system thermocouples.I also performed general maintenance on equipment and assisted in the development of new measurement and recording equipment.As a technician, I calibrated, installed, repaired.

São José Dos Campos, São Paulo, Brasil

Working on the instruments of the distillation towers and condensers.Proper installation of thermocouples & pressure transducers.Working on the instruments of the distillation towers and condensers. Adjusting flow switch of pump systems.Tests on all control valves and configuration of their respective positioners.

Araucária, Paraná, Brasil

Identify the problems, and repair and replace faulty components in the reactor system.Replacement of all reactor temperature elements like type k, type J, PT100, and loop test of LV/TV/PV/HV valves. Calibration of pressure, temperature, and level transmitters.

Duque De Caxias, Rio De Janeiro, Brasil

Working on the shutdown of the butadiene plant.Disassembly, assembly, and test valves for this system.Acting at the ammonia plant with operators and leading tests and calibrations of vessel and tank transmitters.

Betim, Minas Gerais, Brasil

Performing all tests on Foundation Fieldbus and Hart transmitters for the Hydrotreating process (HDT).Troubleshooting for Furnace System, H2, High Pressure Separator and Naphtha.

São José Dos Campos, São Paulo, Brasil

As a technician, I acted in the pump system, performed valve calibration, performed parameterization of transmitters, etc.I also performed maintenance on the HVAC Damper and supported the unit restart with the Petrobras team.

Duque De Caxias, Rio De Janeiro, Brasil

Maintenance and interface of various westlock intelligent positioners.Replaced the damaged parts with spares. Assembled the valve body and bonnet flange with the actuator.Performed hydro test as per pressure rating of the control valve.

Betim E Região, Brasil

Instrumentation technician in the maintenance Shutdown contract of the REGAP - Betim Refinery.Working at CCF and HDT units, supported the maintenance team in calibration, test loop, commissioning of control instruments process using Hart and Fieldbus protocols.

Rio Grande E Região, Brasil

My role was making decisions, exercising of judgment concerning operations in the following shipbuilding, construction of ship hulls, oil and gas systems, ascertains compliance of skids, offshore fabrication and so on. Geared towards leading practices for evaluating the quality of materials, equipment and processes. Through this practice, I was able to.

Recife E Região, Brasil

During this job, I inspected, tested, and repaired electrical, electronic, mechanical, and pneumatic instruments and systems used for display, recording, and control.I ensured the equipment was functioning according to specifications and performed test procedures and loop checks. Investigated problems, troubleshooted, and debugged equipment. Reading piping.

Rio De Janeiro E Região, Brasil

Control systems technician for subsea production systems (Manifold, SCM, Christmas Tree), for the oil and gas industry. Complex assembly, reading/wiring drawings, connecting and testing electronic boards for subsea multiplexed control systems. Perform hydrostatic testing, in-house testing, overpressure testing, and factory acceptance testing (FAT) in.

Rio De Janeiro E Região, Brasil

I was responsible for calibrating, troubleshooting, and maintaining gas analyzers, multi-gas detectors, and gas meters. Providing on-site technical support in various Brazilian states. Created AutoCad designs for oxygen systems, equipment, and gas processing plants.

Rio De Janeiro E Região, Brasil

Assembling and testing instrumentation and control devices according Brazilian National Oil (ANP) procedures. Main responsibilities include performing oil/water measuring liquid-in-liquid concentrations by measuring the complex properties of the flow stream using BSW equipment.Parameterizing and calibration of BS&W analyzers according manufacturer's.

Bachelor'S Degree, Electrical Engineering

Instrumentação E Controle