Mohammed Hamid Khan Email and Phone Number
Mohammed Hamid Khan personal email
- Valid
• With an extensive background of approximately 12 years, I have been involved in the installation, testing, and commissioning of Electrical Systems in Construction projects.• I have a proficient understanding of AutoCAD, E-Plan, and MS Office, MS-Project, along with a foundational familiarity with Revit-BIM, ETAP, and Dialux.• Demonstrating substantial expertise in tasks including preparation of Prequalification Documents, Technical Submittals, Document Submittals, Shop drawings, Red Line Drawings, As-Built Drawings, RFQ, RFI, Quantity Surveying report, FAT, SAT, Project Budget Schedule, Cost Variation documents, Test reports, , Root Cause Analysis Reports, Site Progress reports, NCR closure reports, Clash Reports, etc.• Operating in accordance with various Electrical Regulations and Standards such as NFPA, IEC, NEC, API, IEEE, QCS2014, KAHRAMA, DEWA, ARAMCO, etc.• Demonstrating substantial proficiency in the Estimation, Installation, Testing, and Commissioning of a wide array of Low Current (LC) Systems including CCTV, Fire Alarm and Voice Evacuation Systems, PAGA Systems, Access Control Systems, IBMS, Audio Visual, Structured Cabling, IPTV, Intrusion Alarm System, Gas Detection, FM200, Master Clock, Intercom, etc.• Demonstrating substantial proficiency in Estimation, Installation, Testing, and Commissioning of a wide array of Medium Voltage (MV) and Low Voltage (LV) Systems including General/Emergency Lighting, Decorative Lighting, Explosion Proof Lighting, General/Emergency/UPS Power, Lighting Control, Blind Motor Control, Explosion Proof Panels, Distribution Panels, CBDB Panel, Transformers, LV/MV Panels, etc.• Demonstrating substantial proficiency in Power and Communication Cable laying (Underground Trenches, Low-Level and High-Level Cable Trays, and Trunkings), Testing, Tagging and Termination.• Possessing fundamental knowledge of PLC, SCADA, DCS, Variable Speed Drives, Instrumentation, Hydraulic and Pneumatic Systems, and HMI. • Possessing fundamental knowledge in calculation related to the rating of Distribution Panels, Transformers, UPS, Central Battery Systems, Diesel generators, Power cables, Short circuits at various points, and Earthing, and Lightning protection.• Possessing knowledge of implementing Automation Controls within Electrical and Mechanical Systems such as AHU, VRV, FCU, VAV, CAV, etc.• Exhibited strong coordination and follow-up with both the Civil and Mechanical departments, facilitating the seamless progress of the project.• Demonstrating a strong gasp of HSE, as well as QA/QC requirements.
-
Senior EngineerOds Global Aug 2024 - PresentNoida, Uttar Pradesh, India• Review shop drawings and coordinate with Main Contractor / Consultant for approval.• Collaborate with the Main Contractor / Consultant for document approval.• Inspect received materials and site work, generating reports.• Lead Testing and Commissioning, troubleshoot and resolve faults.• Attend routine meetings with stakeholders.• Coordinate with various teams for installation, testing, and commissioning.• Collaborate with QA/QC, HSE, Civil and MEP Contractors at… Show more • Review shop drawings and coordinate with Main Contractor / Consultant for approval.• Collaborate with the Main Contractor / Consultant for document approval.• Inspect received materials and site work, generating reports.• Lead Testing and Commissioning, troubleshoot and resolve faults.• Attend routine meetings with stakeholders.• Coordinate with various teams for installation, testing, and commissioning.• Collaborate with QA/QC, HSE, Civil and MEP Contractors at different stages of project.• Identifying opportunities for project variations.• Verifying the invoices submitted by the Subcontractors.• Implementing Request for Information (RFI) process.• Maintain site reports and ensure HSE and QA/QC compliance. Show less -
Electrical EngineerTrags Electrical Engineering & Air Conditioning Company May 2019 - Mar 2022Doha, Qatar• Before the project’s commencement, assess the design and associated IFC drawings to verify their coherence. Identify any ambiguities and discuss them with the Project Manager. Examine project’s specifications to ensure they align with Design.• Evaluate the Technical Documentation submitted by Electrical Vendors / suppliers to seek approval.• Coordinating with the Draftsman for preparing the Shop Drawing in the required format, as mentioned in Project Specification. • Ensuring… Show more • Before the project’s commencement, assess the design and associated IFC drawings to verify their coherence. Identify any ambiguities and discuss them with the Project Manager. Examine project’s specifications to ensure they align with Design.• Evaluate the Technical Documentation submitted by Electrical Vendors / suppliers to seek approval.• Coordinating with the Draftsman for preparing the Shop Drawing in the required format, as mentioned in Project Specification. • Ensuring design deliverables are thoroughly reviewed for completeness and alignment with project scope and site conditions.• Collaborating and coordinating with fellow project leaders, specialists, designers, and vendor specialist.• Creating FAT/SAT documents, spearheading related activities and providing training to customers and service technicians.• Engaging with clients throughout the project execution and maintaining coordination.• Coordinating with Architectural and Main Contractor, and Sub-Contractors to oversee installation, testing and commissioning activities.• Taking charge of third-party engineers and technical personnel.• Overseeing project timelines, managing workforce, and meeting tight deadlines.• Leading Testing and Commissioning operations, troubleshooting on-site issues, investigating, and resolving faults.• Participating in routine meetings with Customers, Consultants and Contractors during Installation, Testing and Commissioning phases.• Maintaining continuous communication with Project Manager and Engineering Manager to relay progress updates and site changes.• Identifying opportunities for project variations and promptly informing the Project Manager.• Initiated Request for Information (RFI) process to proactively prevent costly corrective measures.• Maintain records of site reports in approved formats.• Preparing documents to close the NCR by complying the standards and consultant’s comments and maintaining the records. Show less -
Mep EngineerLeighton Asia Nov 2018 - Mar 2019Maker Maxity, Bkc, Mumbai• Evaluate the Technical Documentation submitted by Electrical Sub-Contractors to seek approval.• Review the shop drawings provided by Electrical Contractors to ensure they meet the required standards for approval.• Collaborate with the Consultant to obtain approval for submitted documents (such as Prequalification Documents, Material Submittals, Shop Drawings, etc.).• Conduct inspections of materials and site work and compile corresponding reports.• Issuing NCR for the work… Show more • Evaluate the Technical Documentation submitted by Electrical Sub-Contractors to seek approval.• Review the shop drawings provided by Electrical Contractors to ensure they meet the required standards for approval.• Collaborate with the Consultant to obtain approval for submitted documents (such as Prequalification Documents, Material Submittals, Shop Drawings, etc.).• Conduct inspections of materials and site work and compile corresponding reports.• Issuing NCR for the work that was not built as indicated in the approved issued for Construction drawings.• Leading Testing and Commissioning operations, troubleshooting on-site issues, investigating, and resolving faults.• Participating in routine meetings with Customers, Consultants and Contractors during Installation, Testing and Commissioning phases.• Coordinating with Architectural and Interior Design Teams, Main Contractor, and Sub-Contractors to oversee installation, testing and commissioning activities • Work alongside CIVIL and Mechanical Contractors during various project stages to ensure project efficiency.• Identifying opportunities for project variations and promptly informing the Project Manager.• Initiated Request for Information (RFI) process to proactively prevent costly corrective measures.• Maintain records of site reports in approved formats.• Guaranteeing full compliance with HSE rules and QA/QC policies requirements across all areas specific activities and tasks. Show less -
Mep EngineerOasis Tech Contracting Llc Dec 2015 - Feb 2018Dubai, Uae• Before the project’s commencement, assess the design and associated IFC drawings to verify their coherence. Identify any ambiguities and discuss them with the Project Manager. Examine project’s specifications to ensure they align with Design.• Evaluate the Technical Documentation submitted by Electrical Sub-Contractors to seek approval.• Ensuring design deliverables are thoroughly reviewed for completeness and alignment with project scope and site conditions.• Engaging with… Show more • Before the project’s commencement, assess the design and associated IFC drawings to verify their coherence. Identify any ambiguities and discuss them with the Project Manager. Examine project’s specifications to ensure they align with Design.• Evaluate the Technical Documentation submitted by Electrical Sub-Contractors to seek approval.• Ensuring design deliverables are thoroughly reviewed for completeness and alignment with project scope and site conditions.• Engaging with clients throughout the project execution and maintaining coordination.• Coordinating with Architectural and Interior Design Teams, Main Contractor, and Sub-Contractors to oversee installation, testing and commissioning activities.• Taking charge of third-party engineers and technical personnel.• Overseeing project timelines, managing workforce, and meeting tight deadlines.• Supervising site completion verification and pre-commissioning tasks.• Leading Testing and Commissioning operations, troubleshooting on-site issues, investigating, and resolving faults.• Participating in routine meetings with Customers, Consultants and Contractors during Installation, Testing and Commissioning phases.• Maintaining continuous communication with Project Manager and Engineering Manager to relay progress updates and site changes.• Identifying opportunities for project variations and promptly informing the Project Manager.• Creating FAT/SAT documents, spearheading related activities and providing training to customers and service technicians.• Initiated Request for Information (RFI) process to proactively prevent costly corrective measures.• Maintain records of site reports in approved formats.• Preparing documents to close the NCR by complying the standards and consultant’s comments and maintaining the records.• Guaranteeing full compliance with HSE rules and QA/QC policies requirements across all areas specific activities and tasks. Show less
-
Electrical EngineerCegelec Qatar Wll Oct 2014 - Oct 2015Doha, Qatar• Evaluate the Technical Documentation submitted by Electrical Sub-Contractors to seek approval.• Review the shop drawings provided by Electrical Contractors to ensure they meet the required standards for approval.• Collaborate with the Consultant to obtain approval for submitted documents (such as Prequalification Documents, Material Submittals, Shop Drawings, etc.).• Conduct inspections of materials and site work and compile corresponding reports.• Issuing NCR for the work… Show more • Evaluate the Technical Documentation submitted by Electrical Sub-Contractors to seek approval.• Review the shop drawings provided by Electrical Contractors to ensure they meet the required standards for approval.• Collaborate with the Consultant to obtain approval for submitted documents (such as Prequalification Documents, Material Submittals, Shop Drawings, etc.).• Conduct inspections of materials and site work and compile corresponding reports.• Issuing NCR for the work that was not built as indicated in the approved issued for Construction drawings.• Leading Testing and Commissioning operations, troubleshooting on-site issues, investigating, and resolving faults.• Participating in routine meetings with Customers, Consultants and Contractors during Installation, Testing and Commissioning phases.• Work alongside CIVIL and Mechanical Contractors during various project stages to ensure project efficiency.• Initiated Request for Information (RFI) process to proactively prevent costly corrective measures.• Maintain records of site reports in approved formats.• Guaranteeing full compliance with HSE rules and QA/QC policies requirements across all areas specific activities and tasks. Show less
-
Electrical EngineerSafari Company Limited Dec 2012 - Aug 2014Jeddah Governorate, Saudi Arabia• Evaluate the Technical Documentation and coordinate with the project consultant to seek approval.• Review the shop drawings prepared by Electrical Draftsman to ensure they meet the required standards for approval.• Collaborate with the Consultant to obtain approval for submitted documents (such as Prequalification Documents, Material Submittals, Shop Drawings, etc.).• Conduct pre-inspections of materials and site work and compile corresponding reports.• Closing NCR for the… Show more • Evaluate the Technical Documentation and coordinate with the project consultant to seek approval.• Review the shop drawings prepared by Electrical Draftsman to ensure they meet the required standards for approval.• Collaborate with the Consultant to obtain approval for submitted documents (such as Prequalification Documents, Material Submittals, Shop Drawings, etc.).• Conduct pre-inspections of materials and site work and compile corresponding reports.• Closing NCR for the work that was not built as indicated in the approved issued for Construction drawings.• Leading Testing and Commissioning operations, troubleshooting on-site issues, investigating, and resolving faults.• Participating in routine meetings with Customers, Consultants and Contractors during Installation, Testing and Commissioning phases.• Work alongside CIVIL and Mechanical Contractors during various project stages to ensure project efficiency.• Initiated Request for Information (RFI) process to proactively prevent costly corrective measures.• Prepare cost variation supportive documents and coordinate the Main Contractor for approval.• Maintain records of site reports in approved formats.• Guaranteeing full compliance with HSE rules and QA/QC policies requirements across all areas specific activities and tasks Show less
-
Site EngineerMicro Systems Aug 2009 - Oct 2012Mumbai Area, India• Managed the coordination of Installation, Testing and Commissioning for ELV/Low Current System.• Reviewed Shop Drawings and Schematic drawings, Project Specifications, Scope of Work.• Orchestrated the integration of ELV/Low Current System with other MEP Systems.• Led efforts in material quantity assessments, estimates, surveys, and designs.• Verified the accuracy of all work in accordance with the scope of scope of work and designed shop drawings.• Generated internal… Show more • Managed the coordination of Installation, Testing and Commissioning for ELV/Low Current System.• Reviewed Shop Drawings and Schematic drawings, Project Specifications, Scope of Work.• Orchestrated the integration of ELV/Low Current System with other MEP Systems.• Led efforts in material quantity assessments, estimates, surveys, and designs.• Verified the accuracy of all work in accordance with the scope of scope of work and designed shop drawings.• Generated internal reports documented work progress and submitted these updates to the Team Lead.• Coordinated various site activities including material reception, cross referencing delivered items with BOQ and Project Specification, submitting for QA/QC approval.• Facilitated the approval of tools and accessories used by Technicians, obtaining fitness tags of each equipment, and renewing the same as per project requirements.• Coordinated in installation of First Fix and Second Fix of ELV systems and getting approval for the same from the Consultant.• Initiated Request for Information (RFI) process to proactively prevent costly corrective measures.• Prepare cost variation supportive documents and coordinate the Main Contractor for approval.• Prepared detailed reports as per client requests and actively participated in weekly progress meetings.• Maintained strict compliance with EHS regulations and QA/QC policies across all tasks. Show less
-
TraineeKurla Railway Traction & Distribution Substation Jun 2008 - Jul 2008Kurla, Mumbai, IndiaOur training was based on Traction & Distribution System in Railway. During training, we observed the maintenance of the circuit breakers, Overhead Equipments. We were also visited the Power Distribution Substation located in Panvel for Local Trains. Where we gathered knowledge about the Distribution Transformers, Power Transformers, Current Transformers, Surge / Lightning Arrestors, modern electronic relays used for the protection etc.
Mohammed Hamid Khan Skills
Mohammed Hamid Khan Education Details
-
Finolex Academy Of Management & TechnologyElectrical Engineering -
Terna PolytechnicIndustrial Electronics
-
Al-Hasnat Anglo Urdu High SchoolUrdu
Frequently Asked Questions about Mohammed Hamid Khan
What company does Mohammed Hamid Khan work for?
Mohammed Hamid Khan works for Ods Global
What is Mohammed Hamid Khan's role at the current company?
Mohammed Hamid Khan's current role is Electrical Engineer (MMUP/UPDA QATAR CERTIFIED).
What is Mohammed Hamid Khan's email address?
Mohammed Hamid Khan's email address is ha****@****ail.com
What schools did Mohammed Hamid Khan attend?
Mohammed Hamid Khan attended Finolex Academy Of Management & Technology, Terna Polytechnic, Al-Hasnat Anglo Urdu High School.
What are some of Mohammed Hamid Khan's interests?
Mohammed Hamid Khan has interest in Children, Economic Empowerment, Civil Rights And Social Action, Education, Poverty Alleviation.
What skills is Mohammed Hamid Khan known for?
Mohammed Hamid Khan has skills like Electrical Engineering, Engineering, Power Distribution, Project Engineering, Switchgear, Instrumentation, Construction, Autocad, Dcs, Transformer, Epc, Power Generation.
Who are Mohammed Hamid Khan's colleagues?
Mohammed Hamid Khan's colleagues are Bhavik Khatri, Samayita Mondal, Hadil Mon Kunhimohammed, Maria Alyza Camille Pael, Noushad Ali, Pandian Periyasamy, Jetha Ram Get.
Not the Mohammed Hamid Khan you were looking for?
-
-
1yahoo.co.in -
-
Free Chrome Extension
Find emails, phones & company data instantly
Aero Online
Your AI prospecting assistant
Select data to include:
0 records × $0.02 per record
Download 750 million emails and 100 million phone numbers
Access emails and phone numbers of over 750 million business users. Instantly download verified profiles using 20+ filters, including location, job title, company, function, and industry.
Start your free trial