Nerio Vera Email & Phone Number

Texas, United States

United States

- Traveled all across the continental US as an On-site Deployment Engineer, installing NetworkEquipment and Wireless Access Points for the hospitality industry (Knowledgeable on different line ofproducts within brands like Cisco, Meraki, Aruba/HP, Ruckus Technologies, Fortinet and Nomadix. WAPs, Switches, Routers, Firewalls, gateways, etc.).- Unboxed, inventoried, assembled and prepared network devices by scanning mac addresses and serial numbers, organizing equipment by its deployment physical location, physically labeling all the devices with the hostnames.- Racked and stacked headend in MDFs and edge network devices in IDFs. Determined the type ofphysical media to establish uplinks between MDF and IDFs devices (Fiber Type, SFPs compatibility orCopper cable).- Worked closely, kept informed (Daily Reports) and followed guidance from the Project Managersoverseeing to the project.- Staged network equipment by upgrading firmware/IOS and uploading configurationusing predetermined scripts to the headend devices.- Performed WiFi heat maps using different heat map devices (Ekahau and Air Magnet).- Managed onsite technicians crew during the installation to ensure deadlines are met according to the SOW.- Assisted as Voice Technician, deploying Voice/Data headend equipment and IP Phones infrastructure.- Assisted the remote technical support team in solving network connectivity problems for the hospitality industry.- Be on-site liaison between clients, third parties and engineering during the project deployment.

Dallas, Texas, United States

- Traveled all across the continental US as an On-site Deployment Engineer, installing NetworkEquipment and Wireless Access Points for the hospitality industry (Knowledgeable on different line ofproducts within brands like Cisco, Meraki, Aruba/HP, Ruckus Technologies, Fortinet, WatchGuardTechnologies and Juniper. WAPs, Switches, Routers, Firewalls, gateways, etc.).- Unboxed, inventoried, assembled and prepared network devices by scanning mac addresses and serialnumbers, organizing equipment by its deployment physical location, physically labeling all the devices with the hostnames.- Racked and stacked headend in MDFs and edge network devices in IDFs. Determined the type ofphysical media to establish uplinks between MDF and IDFs devices (Fiber Type, SFPs compatibility orCopper cable).- Worked closely, kept informed (Daily Reports) and followed guidance from the Project Managersoverseeing to the project.- Assisted the remote deployment engineers upgrading firmware/IOS and uploading configurationusing predetermined scripts to the headend devices.- Performed WiFi heat maps using different heat map devices (Ekahau and Air Magnet).- Managed onsite technicians crew during the installation to ensure deadlines are met according to the SOW.- Assisted as Voice Technician, deploying Voice/Data headend equipment and IP Phones infrastructure.- Assisted the remote technical support team in solving network connectivity problems for the hospitality industry.- Be on-site liaison between clients, third parties and engineering during the project deployment.

Odessa/Midland, Texas Area

United States

- Designed and implemented RF (coax), Ethernet, Wi-Fi and Fiber Optic network infrastructure.Network Equipment remote installation and configuration (Switches, routers, CMTSs, Wireless AP managers, etc.) - Tier 3 Technical Support for Enseo E3 system for a portfolio of over 500 clients in production. - Provided Technical Support for Enseo E3 system installation. Including remote configuration settings, installation, problem resolution, change management implementation.- Served as a liaison between clients, third parties, engineering and sales department.Proactively & efficiently provided technical support to customers.- Collaborated with the Sales teams to gather and communicate the latest customer needs and competitive information to the company.- Build and perform demonstrations of product capabilities to prospective customers.- Be the liaison between engineering and the customer for product improvement.Travel as support for customers & trade shows.- As PM; I fostered relationships with GMs, Engineers and owners of multi-billion dollar properties.- Overseed installations of Enseo’s products/services coordinating equipment, install crews and 3rd party vendors working within clients approved timeline to completion. Updated monthly re-occurring charges as needed with upsells.- Managed multiple properties simultaneously as Field Engineer and PM, communicating daily with each property point of contact.

Odessa/Midland, Texas Area

Responsibilities: - Provided Directional Drilling services to drill different well profiles (Horizontal, vertical and directional wells) following a well plan. - Operated a variety of drilling systems: Conventional Bent Motors, Rotary Steerable and Vertical systems. - Managed drilling parameters to improve rate of penetration and at the same time keep the well on plan avoiding path deviation. - Supervised drilling crew to assure the use of best practices in the directional drilling activities to avoid accidents on location. - Worked in multiple geographic areas within US and South America: North Texas (Barnett Shale), South East Texas (Haynsville Shale), West Texas and New Mexico (Permian Basin), Oklahoma (Woodford and Marcellus Shale); Yacuiba, Bolivia (Los Monos) and Anelos, Argentina (Quintuco).Key Achievements: - Completed two projects (well drillings with a potential risk for collision) ahead of schedule 5 days and under budget by creating, executing, and modifying complex plans, as Directional Driller with Baker Hughes. - Achieved zero safety incidents for 52 projects by requiring job safety analysis for all potential hazardous tasks to be performed by onsite personnel with Baker Hughes

Responsibilities: - Operated LWD/MWD Equipment at well site (Surface Equipment and Downhole Tools). - Worked with different LWD/MWD services: Directional Only (Surveys), Gamma Ray, Azimuthal Gamma, Resistivity, Bore Hole Imaging and Dynamic Pressure. - Monitored real time drilling dynamics data (vibrations, torque, pressure, etc) to advise changes in drilling parameters and avoid downhole tool failure due to high vibrations or torque. - Prepared Reports from downhole Real time data for the different disciplines within the drilling operation (Geologyst, Drilling Engineer, Company Man and Directional Driller).Key Achievements: - Extend to over 50% the utilization life of downhole LWD tools by monitoring and managing realtime drilling dynamics data (vibration, torque, pressure, etc) avoiding tool failures and keeping the well plan within schedule.

Responsibilities: - Installation, maintenance and repair of residential and commercial public telephone infrastructure. - Provisioning of internet service (ADSL) at customer premises by installing and configuring ADSL modem/Wireless Router.Key Achievements: - Contributing to reduce 15% the resolution time of T-Ticket by implementing a double team strategy to attend difficult situations or time consuming installations.

Orlando, Florida Area

Responsibilities: - Installation, maintenance and repair of residential and commercial satellite TV systems. - Planned installation by evaluating location of dish, testing the line of sight with satellite; laying-out wiring, installing and configuring equipment at customer premises.

Orlando, Florida Area

Responsibilities: - Installation, maintenance and repair of residential and commercial satellite TV systems. - Planned installation by evaluating location of dish, testing the line of sight with satellite; laying-out wiring, installing and configuring equipment at customer premises.

Responsibilities: - Managed projects for design and implementing LAN/WAN Network infrastructure. - Design and installation of Fiber Optic and Cat 5/6 LAN Networks for voice and data (Structure Cabling) - Installation and configuration of Cisco equipment (routers and switches). - Supervised a crew of 10 technician for the installation of double ring of 950 meters fiber optic run in between 5 control rooms on an automated oil and gas fuel storage facility.Key Achievements: - The deployment of the dual fiber optic ring project increased the reliability and availability of the SCADA system that control the facility from 85% to 99.99%.

Maracaibo Venezuela

Responsibilities: - Support of Tier 2 for over 2000 Microsoft Windows based HP and Compaq workstations and about 300 HP network printers on customer premises. - Responsible for initial workstation installations as well as configuring for a specific end user desktop applications. - Provided for made regular site visits to external customers for problem resolution or upgrades to customer desktop and network equipment.Key Achievements: - Led a team for computer and software audit and remediation strategy for the Y2K compliant project.

B.S. Computer Engineer, Computer Engineer

Computer Engineering

Superior Technician In Information Technologies, Information Technology