Please complete the CAPTCHA to continue
@ngc.com
✓
3 phones found area 514
✓
LinkedIn matched
A concise factual answer block for searchers comparing this professional profile.
James H Wright, Pe (California) is listed as Mechanical Engineer - Experience for Rent at Virgin Galactic, based in Tucson, Arizona, United States. AeroLeads shows a work email signal at ngc.com, phone signal with area code 514, and a matched LinkedIn profile for James H Wright, Pe (California).
James H Wright, Pe (California) previously worked as Test Engineer at Virgin Galactic and Designer at Northrop Grumman. James H Wright, Pe (California) holds Bsme, Bachelor Of Science Mechanical Engineering from The Ohio State University.
This section adds company-level context without repeating James H Wright, Pe (California)'s masked contact details.
AeroLeads found 1 current-domain work email signal for James H Wright, Pe (California). Compare company email patterns before reaching out.
A seasoned mechanical engineer with years of industrial experience and mileage, primarily in aerospace, lately the medical device industry. Experienced with certification, component and system testing, design, FARs 23, 25, 27 and 29; FEA stress analysis, flight test, interiors, manufacturing, medical devices, project management, spacecraft, space launch platforms and launch vehicles, structural, tooling, and other program survival skills. Has worked several return engagements with former clients from established credibility. US Citizen.In a word... EXPERIENCE, something that evolves over time.
Listed skills include Aerospace, Systems Engineering, Engineering, Mechanical Engineering, and 46 others.
Company context helps verify the profile and gives searchers a useful next step.
A career timeline built from the work history available for this profile.
Tustin, CA, US
Test Engineer, Ground Test Group. Authoring Production Acceptance and Qualification Test Plans for the Delta Spaceship program. Utilizing 3DX for PLM and modeling of test fixtures. Using FEMAP for modal and other analysis.
Falls Church, VA, US
Providing drafting and modeling support using NX 2206. Layout studies, rapid drawing turnaround and other design support services as needed. Supporting a new generation of engineers as a Designer.
Odessa, Florida, US
New contract (1099) with Baymar. Provide drawing conversion, tolerance analysis and other engineering services for Baymar’s client, Roche Sequencing Systems’ DNA sequencer as needed. Completed 20-hour refresher course (GeoTol Inc.) in ASME Y14.5-2018 GD&T.
Odessa, Florida, US
Supported the engineering model and drawing database for the Client’s (Roche Tissue Diagnostics/Ventana) APEX medical instrument. Provided mechanical engineering support to a multi-discipline IPT (Agile team), including CAPA safety board investigations and supplier sourcing. Solidworks 2018 was used for the CAD work.
Provided engineering support for a high-altitude airship. SME for flight systems hardware integration. Used Solidworks 2018 for modeling and drawing creation. (COVID-related contract termination).
Used NX12 to design interior assemblies and installations for G550 HALO aircraft modifications.
SkyCourier aircraft program. Provided front-end data mining and compilation of certification documents. Designed text fixtures for RTCA/DO-160 testing using CATIA V6. Authored QTPs and QTRs and coordinated resources for fuel quantity gaging certification performed in-house.
Charlotte, North Carolina, US
ACES 5 Ejection Seat Escape System. Authored test plans and reports, supported PDR, covered critical weekend production, and supported multiple programs simultaneously. Modified live ejection test fixtures as needed using NX. BATFE explosives handling clearance.
Centennial, CO, US
Modeling and validation of Delta IV Upper Stage Engine Integration and cryogenic LOX, LH, He installations using NX8 and NX11. Authored Statements of Work, ATPs and other documents as required to support testing and production release of GSE.
London, England, GB
Provided production engineering support to engine accessories including fuel pump and metering units, and electronic enclosures packaging (ARINC 600 and ATR) using NX.
Cleveland, OH, US
Provided engineering documentation to refurbish the USAF C-5A/B Fire Suppression and (liquid) Nitrogen Inerting System. Compiled and authored LRU qualification test reports for the Rolls-Royce Trent 1000-TEN, XWB and GE-90 programs, among others.
Cleveland, OH, US
Provided engineering analysis for the COMAC 919’s center and wing tanks’ fuel pumps, including Excel-based tolerance stacks. Authored qualification test reports and reduced production sustaining backlog.
Cedar Rapids, Iowa, US
Produced tolerance stacks and NX models to reverse-engineer an A400M PMOR (Panel Mounted Oxygen Regulator), and other tolerance stacks and NX layouts to help diagnose a non-conforming field condition in an oxygen dispensing system. Authored technical notes (coord memos) to Airbus, for a Sustained Engine Imbalance, requirement for an oxygen mask system.
Hawthorne, California, US
Provided NX structural design engineering ¬for a transporter/erector launch platform at Cape Canaveral, Florida, for the Falcon 9 rocket. Provided NX-based layouts for a feasibility study to retrieve a reusable Falcon 9 first stage assembly from the ocean.
Birmingham, West Midlands, GB
Produced NX-based layouts for tooling fixtures used in a vacuum furnace at 1550°F.
Fort Collins, CO, US
Provided engineering for GE’s TRAS (Thrust Reverser Actuation System) for the A320 NEO, using both NX and SolidWorks. ASME Y14.5-2009 GD&T was used. Provided tolerance stack-ups for several LRUs, including the hydro mechanical actuators. Traveled to France as a part of GE’s delegation to support the integration of LRUs into the Airbus/Aircelle A320¬ NEO..
Cedar Rapids, Iowa, US
Provided NX designs for B/E’s Super First Class interior furnishings such as monuments, credenzas and related mechanisms.
London, England, GB
Supported Rolls-Royce’s outsourcing of engine components, including oil pumps, accessory gearbox castings and other LRUs. Authored Technical Analysis Reports (TAR), First Article Inspection Reports (FAIR), Last Article Inspection Reports (LAIR), Material Review Board concessions, tooling dispositions, and supported the Fixed Process Approval (FPA) supplier.
Cedar Rapids, Iowa, US
Provided NX-based engineering for several of Rockwell Collins’ flight and pilot controls, including the Horizontal Stabilizer Trim Actuator (HSTA) for the Airbus A350, Boeing 787 pilot controls, and Dassault Falcon Jet F7X subsystems. Production support for the Embraer ERJ-190, among others.
London, England, GB
Supported production of engine compressor vane and stator assemblies for Rolls-Royce’s engine models M250, AE1107, AE2100, AE3007 and the T56. Helped resolve quality and supplier-related non-conformance issues and presented solutions at MRB and PCB meetings. Produced preliminary design for the RB282 engine program, using NX and CATIA V5. Provided NX.
Cedar Rapids, Iowa, US
Provided NX, GD&T and other engineering for legacy throttle quadrants and other pilot controls. Authored Acceptance Test Procedures (ATP), Qualification Test Procedures (QTP), and handled coordination memos between the Rockwell Collins, Gulfstream and Israeli Aircraft Industries.
Pasadena, CA, US
Provided NX and SolidWorks-based engineering design for the Mars Science Laboratory, the Curiosity Rover, including flight hardware prototypes and tooling. Provided NX layouts for large structural and optical kinematic mounts, and large instrument packages in the cancelled SIM (Space Interferometer Mission) program. Provided both NX modeling services to.
Charlotte, North Carolina, US
Provided NX-based engineering for the Boeing 787 (APS5000) APU. Refined the design of the composite inlet door, seals and mechanical interfaces, including a heat shield for fire testing of the Fuel Control Unit, FCU, for the A-380 APU. Produced NX designs for the ARJ-21 Chinese RJ’s APU.
Moffett Field, California, US
Provided FAR 25 STC, Supplemental Type Certificate, compliance charts for NASA’s SOFIA (Stratospheric Observatory For Infrared Astronomy), a 2.5 meter diameter reflector telescope inside of a Boeing 747SP.
Arlington, VA, US
Provided NX-based engineering designs for Boeing’s first CV-22 maintenance trainer.
Boston, MA, US
Produced design and FEA stress analysis, using NX, ANSYS for the F404-402 (F-18), F404-T50 (Korea), F404-IN20 (India), F414 (F-18E/F).
Charlotte, North Carolina, US
Authored procurement specs, handled vendor coordination and conducted PDRs/CDRs of sensors (N2, EGT and T2) for Honeywell’s turbomachine for the F-35 JSF. Authored specifications for bleed air control valves associated with Honeywell’s turbomachine. AS907 support.
Dorval, Québec, OO
CRJ-700 Flight Test Engineer. Handled the interfaces between GE’s CF34-8C1 engine, its FADEC and the aircraft’s ARINC intranet. Authored flight test plans, compiled flight test results, authored test reports to be used for certification, and resolved flight test squawks. Briefed and de-briefed test pilots. Supported the Q-400 turboprop (PW150 engine) and.
Boston, MA, US
Produced design and FEA stress analysis for the F404-KTX (Korean) fighter using NX and ANSYS.
Dorval, Québec, OO
Provided flight test and production support services for Bombardier’s Learjet 45 program.
Longueuil, CA
Electrical Accessories group. Supported failure investigations of electrical sensors, wire harnesses and other engine external equipment. Requalified out-of-production LRUs by working with new suppliers for legacy PW100 engine models. Authored reports which demonstrated compliance with US, Canadian and European airworthiness standards. Evaluated technology.
Fort Worth, Texas, US
Modified the Bell 412HP crash-resistant fuel system for the Canadian Forces’ CH-146 Griffon, including other modifications for the hydraulic system and engine installation. Produced CATIA V4-based fuel, hydraulic and powerplant designs for the Bell 206, 230, 407 and 430 models, including composite nacelles and composite fairings.
Arlington, VA, US
MD900 program: Produced NX-based component, system layout and installation drawings of ECS, flight controls, crash-resistant fuel, hydraulic, and engine installation systems during preliminary and production design stages. AH-64 Apache program: sustaining support of engine exhaust IR suppressors, crashworthy fuel system, hydraulic, pneumatically-powered.
Stratford, Connecticut, US
Provided fuel system, power plant and airframe designs, including composite engine nacelles and composite nacelle work platforms using CATIA. Evaluated proposals for nitrogen inerting (OBIGGS), range extension, service life extension and mod kits to airframe, fuel and powerplant installations. Cognizant engineer for the MH-53E minesweeping helicopter’s.
Arlington, VA, US
757 program: Designed parts for the APU (Auxiliary Power Unit) group.KE-3A program: Produced refueling system layouts and installation drawings.
Other employees you can reach at virgingalactic.com. View company contacts →
George L.
Colleague at Virgin Galactic
Greater Sacramento, United States, United States
View →
JL
Jonny Lazaro
Colleague at Virgin Galactic
Ruislip, England, United Kingdom, United Kingdom
View →
RF
Rob Falco
Colleague at Virgin Galactic
Indianapolis, Indiana, United States, United States
View →
TS
Tiffane Stuckenschneider
Colleague at Virgin Galactic
Corona, California, United States, United States
View →
QC
Quentin Cannon
Colleague at Virgin Galactic
Las Cruces, New Mexico, United States, United States
View →
AP
Alexandre P.
Colleague at Virgin Galactic
Las Cruces, New Mexico, United States, United States
View →
DS
Derek Schatz
Colleague at Virgin Galactic
Orange County, California, United States, United States
View →
CL
Courtney Leverenz
Colleague at Virgin Galactic
United States, United States
View →
JF
Jason Formagus
Colleague at Virgin Galactic
Orange, California, United States, United States
View →
AH
Auhdra Houston
Colleague at Virgin Galactic
Las Cruces, New Mexico, United States, United States
View →
Quick answers generated from the profile data available on this page.
James H Wright, Pe (California) works for Virgin Galactic.
James H Wright, Pe (California) is listed as Mechanical Engineer - Experience for Rent at Virgin Galactic.
AeroLeads has found 1 work email signal at @ngc.com for James H Wright, Pe (California) at Virgin Galactic.
AeroLeads has found 3 phone signal(s) with area code 514 for James H Wright, Pe (California) at Virgin Galactic.
James H Wright, Pe (California) is based in Tucson, Arizona, United States while working with Virgin Galactic.
James H Wright, Pe (California) has worked for Virgin Galactic, Northrop Grumman, Baymar Solutions, Llc, Sceye Inc., and L3Harris Gcs.
James H Wright, Pe (California)'s colleagues at Virgin Galactic include George L., Jonny Lazaro, Rob Falco, Tiffane Stuckenschneider, and Quentin Cannon.
You can use AeroLeads to view verified contact signals for James H Wright, Pe (California) at Virgin Galactic, including work email, phone, and LinkedIn data when available.
James H Wright, Pe (California) holds Bsme, Bachelor Of Science Mechanical Engineering from The Ohio State University.
James H Wright, Pe (California) is listed with skills including Aerospace, Systems Engineering, Engineering, Mechanical Engineering, Manufacturing, Catia, Gas Turbines, and Manufacturing Engineering.
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trial Search contacts