Robert Morgan Email & Phone Number

Melbourne, Fl, Us

Charlotte, North Carolina, Us

Volunteer basis to support others who may be struggling on how to handle their resources.

De Leon Springs, Florida, Us

• Process Lead (Systems) - Aligning Systems Engineering Process to the enterprise phase/gate Framework...ensuring Standard Process is institutionalized.• Systems Engineering - Leading/Supporting Independent Review Teams for providing mentorship to key project leads on Programs that are new to System Engineering Process, Design for X, and Project Engineering.

Melbourne, Florida, Us

• IPT Lead F-35 - TR3 (SAS Segment) - Return to Green IPT Lead - DS/Crypto Module IPT lead on the F-35 TR3 program after supporting an Independent Review Team bringing Systems focus to an IPT the was struggling with Requirements Management and Verification Phase planning.• Advance Concept Engineer– Proposal - Provided leadership and support on two Major Proposals (each valued at more than $500M+ for L3Harris…$3B+ for Prime; recently awarded Ground Weapon Systems (MDA)). Support initial RFI and RFP stages developing winning Architecture.

Melbourne, Florida, Us

Chief Engineer - Systems: Leading/Support Independent Review Teams for providing mentorship to key project leads on Programs that are new to System Engineering Process, Design for X, and Project Engineering. Leading Engineering Process Team for the Integrated Mission Systems (IMS) Segment for development of Roadmap and Framework of a unified engineering process (based on 25+ newly acquired engineering sites with various levels of Engineering Process). Aligning all of IMS Engineering Process to the enterprise L3Harris phase/gate Framework...ensuring Standard Process is institutionalized.

Melbourne, Florida, Us

Advance Program Engineer - Created Technology Roadmap for Strategic SATCOM Ground Segment for the the Next Generation MET Terminal to support DoD vision by L3Harris.Co-Created Technology Roadmap to support Missile Defense vision by L3Harris.Led various Business Development efforts for DoD and International SATCOM efforts.Led critical SATCOM Network Diversity Demos at Aberdeen for Army

Melbourne, Florida, Us

Proposal/Program ExecutionChief System Engineer - Led team to architect Solid State HPA replacement for legacy Klystron for key DoD Customer. Working with Study/IRAD Lead for successful MMIC release...Key component for SSPA. IRT ActivitiesLed various key Independent Review Teams to ensure Programs followed sound Engineering and Program Management Process.Strategic Growth/APEKey developer of two Tech Roadmaps for 2 BAs used by SATCOM Director for SGP Planning.Awarded Seedling IRAD on Phased Array with Principle Engineer.Attended and developed topic that was presented at MIL-STD-188-164C Working Group (Jan 2019)

Melbourne, Florida, Us

Chief System Engineer located in Abu Dhabi UAE... responsible for the design/development, integration, First Article Qualification and certification of ELTS IOC Battle Management System for the UAE Land Forces.

Melbourne, Florida, Us

Sr. Engineering Manager for Systems Engineering at Harris ES which includes Systems process, design and analysis, test, and sustainment engineering. Responsibilities for this role begin with leading 100+ engineers, engineering specialists and technicians to support the various programs and business areas. This includes career development, matrix organization staffing, recruiting, division processes, and helping ensure positive programmatic executionAlso, a key contributor of UAE ELTS IOC Proposal Team (Received Harris Engineering & Program awards for Program Win) – Initial Program Value $200M. ELTS is a Battle Management System to support Real-time Combat operations. After award was made Chief Systems Engineer of “Away Team” located for a two-year assignment in Abu Dhabi, UAE to lead technical side of program.

Melbourne, Florida, Us

Sr. Engineering Manager for RF Electronics at Harris GCS which includes RF electronics design and analysis, test, a variety of controls engineering, as well as electromagnetics and nuclear effects engineering. The businesses supported within Harris include RF Electronics for Space, Ground, Air and Sea. Specific technologies include phased arrays, receivers, frequency converters, synthesizers, power amplifiers and radiated emissions. Responsibilities for this role begin with leading 70 engineers, engineering specialists and technicians to support the various programs and business areas. This includes career development, matrix organization staffing, recruiting, division processes, and helping ensure positive programmatic execution- Managing RF Electronics Core Technology Center (CTC)

Melbourne, Florida, Us

Chief System Engineer responsible for the development, integration, First Article Qualification and ARSTRAT certification of Modernization of Enterprise Terminals (MET). These terminals are the backbone of the entire DOD Strategic Satellite Network and will interface to the next-gen WGS Satellite constellation.

Melbourne, Florida, Us

RF Systems Integrated Product Team Leader (MET Program – Current Value $750M+)• Responsible for RF Architecture and key Sub-System/Component Development of Modernization of Enterprise Terminals (MET). These terminals are the Backbone of the entire DOD Strategic Satellite Network and will interface to the next-gen WGS Satellite constellationo Responsible to and Developer of Cost, Schedule, and Technical Plan for entire RF Systems activity for MET Program RF Budget Analysis – Worked with Team of Engineers to develop complex, modular RF System that conform to several Customer Terminal configurations…Focus on balanced cascaded performance that can handle three antenna types, X-band and Ka-band, Fiber Optics, Teleport Matrix switching, Converters, High Power Amplifiers (TWTA and SSPA), etc Oversaw In-house Development of all Converter/DA Development (10 Products overall) including First Article Qualification Responsible for Capital development ($1M+) of Automated Test Systems for the Converter Team. Developed Test Procedures for Converter Products Responsible for Technical Specification allocation/development, Subcontract Selection and Technical Management of SSPA, TWTA, Fiber Optics, L-band Switching (Teleport), and Frequency Timing System.RF Systems Proposal (MET Proposal – Current Value $750M+)• Key member of MET Proposal Team (one of three Engineers to receive Harris Engineering award for Program Win)o Developed RF Systems Basis of Estimates for Cost and Schedule on the MET Proposalo Key member in initial RF Analysis Team and writer of Technical Proposalo Developed key Sub-systems requirements flow down

Melbourne, Florida, Us

Post Merger of Harris MCD and Stratex Networks - Advised Leadership on Engineering teams for RF and Mechcanical Development to maximize staff potential and minimize product development inefficiency.- Continued in tasks from Harris MCD Position

Melbourne, Florida, Us

Directed RF/Mechanical Engineering, comprised of NPD and existing product support. Managed a muti-site staff of up to 50.• TRuepoint 5000 Development/Release o 13, 15, 10/11, 18, 23, and 38 GHz successfully released. Project engineering concepts installed upon arrival. Instilled teamwork with DVT to insure success. o TR5000 replaced about 35% of the top line revenue from exited products, and increased the division’s gross margin from 20% to well over 45%.• TRuepoint 6000 Development o Released the first 3 (6, 7/8, 10/11 GHz) TR6000 RF Radios in the last 24 months of his tenure at HSTX. • Low Cost Initiative o Worked with PLM and Procurement, the RF/Mechanical Department helped achieve and exceed the goals of 14% annual Cost Reduction for TR5000. Significantly helping maintain/improve revenue/profit margins year over year.• Yield Improvement o Module Yields in early 2005 ranged from low 40% to 80% based on design, test station accuracy / calibration / maintenance, Batch issues, operator issues. Worked with RF Engineering Team and VP of Operations to develop a Yield plan that saw module yield improve from mid 80s to mid 90s (consistently). Further improvements are being implemented to improve all yields to 95+%.• RoHS Compliance o RoHS compliance 100% complete for TR 5000/6000.• Process Development o Improved development schedule compliance, estimation accuracy, accountability, and utilization o RF Methodology Team in place and Design/Project process improvement moving forward and being implemented across all engineering.• Department Functions o Reorganized RF/Mechanical Group to improve delivery to technical, budget and cost commitments. o Ensured all PDS and Salary Planning were completed and given to employees in a timely manner

Melbourne, Florida, Us

• Product Team Leader for Antennas and Transmitters for Electronic Warfare Simulator utilized in training exercises. Responsible for development and procurement of several high power pulsed Transmitters.• Developed architecture and release of several SATCOM Ground-based terminals.

Project Engineer in development of Multi-Band High Power Amplifiers (LMST).Responsible for design and testing of Redundant High Power AmplifiersDeveloped Software for Remote Control of Redundant and VPC High Power Amplifier SystemsDesigned Controller for Antenna mount Amplifier (MX2000XE)Part of team developing communication protocols for High Power Amplifiers

Melbourne, Florida, Us

• Developed automated test software used to characterize and test performance requirements of various RF communication systems at both chassis and system levels. Chassis level items included high power amplifiers, low noise amplifiers, and frequency converters. Tests included EIRP, G/T, antenna gain, antenna patterns, amplitude response, VSWR, phase linearity, phase noise, and thermal noise.• Responsible for assuring Satellite Earth Stations met RF and software performance requirements, utilizing various test techniques. Isolated problems and recommended alternate solutions. Called upon to independently evaluate and align newly installed isolated communication systems.• Developed test procedures used to assure communication systems met all performance requirements.

R&D Engineer Involved with development of innovative HT/MT 2kW X-band TWTA for MCL/Harris ...pushing State of the Art

Worked as a Test/Repair Engineer while interning at MCL Inc. Worked primarily on C/X/Ku bands Traveling Wave Tube (TWT) and Klystron High Power Amplifiers (HPA).

Bachelor Of Science (B.S.), Electrical And Electronics Engineering

High School