Ray Rivera
AeroLeads people directory · profile

Ray Rivera Email & Phone Number

Construction Oversight Engineer and Mechanical and Plumbing at MacDonald-Bedford LLC
Location: Guam 14 work roles 1 school
LinkedIn matched
✓ Verified July 2026 3 data sources Profile completeness 86%

Contact Signals

LinkedIn Profile matched
3 free lookups remaining · No credit card
Current company
Role
Construction Oversight Engineer and Mechanical and Plumbing
Location
Guam
Company size

Who is Ray Rivera? Overview

A concise factual answer block for searchers comparing this professional profile.

Quick answer

Ray Rivera is listed as Construction Oversight Engineer and Mechanical and Plumbing at MacDonald-Bedford LLC, a with 30 employees, based in Guam. AeroLeads shows a matched LinkedIn profile for Ray Rivera.

Ray Rivera previously worked as Construction Oversight Engineer/Mechanical/Plumbing at Macdonald-Bedford Llc and Residential General Contractor / Co-Owner at J&R Design Construct. Ray Rivera holds Bachelor'S Degree, Mechanical Engineering from University Of Santo Tomas.

Company email context

Email format at MacDonald-Bedford LLC

This section adds company-level context without repeating Ray Rivera's masked contact details.

MacDonald-Bedford LLC

Review company-level records connected to Ray Rivera before choosing the right outreach path.

Profile bio

About Ray Rivera

Ray Rivera is a Construction Oversight Engineer and Mechanical and Plumbing at MacDonald-Bedford LLC.

Current workplace

Ray Rivera's current company

Company context helps verify the profile and gives searchers a useful next step.

MacDonald-Bedford LLC
Macdonald-Bedford Llc
Construction Oversight Engineer and Mechanical and Plumbing
Guam
Employees
30
AeroLeads page
14 roles

Ray Rivera work experience

A career timeline built from the work history available for this profile.

Construction Oversight Engineer/Mechanical/Plumbing

Current

Guam, Usa

• Project Involvement: Guam Military Base Quarters (BEQ) 6-Storey and Police Station Building.• Review and provide comments for IFC, Shop Drawings, Submittals, and RFIs for Mechanical and Plumbing Design to ensure compliance as per Specs, Code, and coordinate with the Government Design Manager and OICC/CME.• Coordinate with construction team members to execute project scope, and quality assurance, in conformance with the project requirements.• Facilitate the project team and work closely with the OICC/CME to minimize project delays. • Attend weekly on-site QC and coordination/progress meetings with the contractor and communicate any actions with the OICC/CME.• Work closely with the contractor QC Manager in the development of a quality control re-work list. Ensure all Government findings are incorporated in the re-work list and verify completion status.• Assist the OICC/CME in preparing CREQ PC/RFP, technical analysis, Independent Government Estimate, and analyzing REA.• Make recommendations to OICC for progress, materials status, and equipment. Confirm submittals are complete/approved, materials properly stored, and equipment protected on-site.

Sep 2022 - Present

Residential General Contractor / Co-Owner

J&R Design Construct

Philippines

• Project Involvement: Residential• Ensure work standards are performed to the highest level and meet client requirements.• Oversee, manage, coordinate, and facilitate general construction activities (Civil, Electrical & Plumbing).• Participate in providing quotes for clients, quantity estimation, and submitting plans to local government for permits.• Monitoring subcontractors’ work activities to ensure completion of their assigned tasks.• Handle every aspect of project management including selecting and pricing building materials and delivery schedule.

Feb 2016 - Mar 2022

Senior Mechanical Engineer

Meinhardt Saudi Arabia

Riyadh, Saudi Arabia

• Project Involvement: King Abdullah Financial District (KAFD) & Information Technology and Communication Complex (ITCC) Riyadh, Saudi Arabia.• Client representative for Quality Assurance (QA). Prepare technical site reports/observations/inspections for HVAC, Plumbing, and Fire Protection issues to ensure compliance as per Specifications and International Code Standards (NFPA, ASHRAE, IPC, IMC, SMACNA, SBC)• Review and provide comments for HVAC and Plumbing IFC, Shop Drawings, and submittals to ensure installation work conforms to the standards.• Attend meetings with Site Supervision Consultant and Contractor to discuss Non-Compliance issues.• Review Inspection Request (IR) submittals for closure.

Jun 2012 - Mar 2015

Senior Mechanical/Plumbing Engineer/Interface Coordinator

Jubail, Eastern, Saudi Arabia

• Project involvement: Manifa & Wasit Cogeneration Plant (Aramco)• Performed plumbing design as per UPC & Aramco Standards (SAES).• Prepare technical queries and perform pipe spooling, weld mapping, MTO, RAM, and Material Store Requisition.• Monitor ongoing construction for punch-list completion and provide As-Built drawings.• Meetings with Contractors for Interface-related issues and reporting the status of Interface activities within the Contractor’s scope of work.• Review, analyze and provide comments for underground utilities crossing.

Apr 2010 - Jan 2012

Mechanical Engineer

Oger International Abu Dhabi

United Arab Emirates

• Project Involvement: Abu Dhabi Financial Center (Sowwah Island) high-rise (mixed-used), stock exchange, and retail stores.• Review HVAC plan, equipment specs and provide comments to sub-contractor technical submittals to ensure compliance as per specs and code standards (NFPA, ASHRAE, etc.)• Involved in LEED facilitation to comply as per USGB requirements.• Participate in Plumbing Department for review and analyze plan layout.• Monitoring and inspection of ongoing M&P construction and signed for RFIA with M&P QA/QC approval.• Involved in HVAC seismic support review and approval.• MEP, Architectural, and Structural Plan coordination.

Nov 2008 - Dec 2009

Mechanical Engineer

Las Vegas, Nevada, United States

• Project Involvement: Commercial Retail Stores, Restaurant, and Custom Homes.• Review M&P approved drawings and technical specifications.• Recommend selection of equipment and coordinate with manufacturer’s representative.• Monitored and inspect ongoing MEP construction.• Assist Project Manager and coordinate with sub-contractor.• MEP, Architectural, and Structural Plan coordination.

Dec 2007 - Oct 2008

Plumbing And Hvac Cad Designer

Wright Engineers

Las Vegas, Nevada, United States

• Project Involvement: Residential, Restaurant, and Highrise.• HVAC System Design • Plumbing System Design• Ensure M&P plan layout and sizes are correct and coordinated with structural and architectural drawings.

May 2006 - Nov 2007

Plumbing Cad Designer

Las Vegas, Nevada, United States

• Project Involvement: Highrise and Custom Homes• Plumbing System Design• Assist the Project Manager with project development.• Provide Shop Drawings and Design Plan Coordination.• Creates As-Built drawings.

Feb 2003 - Apr 2006

Facility Maintenance Engineer (Hvac, Electrical, And Plumbing)

Las Vegas, Nevada, United States

• Manage day-to-day facility maintenance operations.• Record daily central plant readings for boilers, chillers, and pumps.• Diagnosing and troubleshooting minor HVAC Equipment problems.• Assisting MEP Contractor with major repairs.• Monitor ongoing major hotel interior renovation. • Maintains and prepares necessary Facility Maintenance reports, stock records, and materials requisitions.

Sep 2001 - Dec 2002

Facility Maintenance Engineer (Hvac, Electrical, And Plumbing)

New Jersey, United States

• Manage day-to-day facility maintenance operations in different NJ office locations.• Provide necessary supplies for different NJ office locations.• Diagnosing and troubleshooting minor HVAC Equipment problems.• Assisting MEP Contractor with major repairs.

May 1999 - Jul 2001

Hvac Design Engineer And Mechanical/Plumbing/Electrical Inspector

Hoi Communications

Riyadh, Saudi Arabia

• Project Involvement: Telecommunication Buildings (STC GSM Buildings)• HVAC System Design for Telecommunication Buildings.• Inspection and record daily MEP and FP activities.• Witnessed HVAC TAB and commissioning, plumbing & and fire protection pressure testing, electrical current reading and ground resistance measuring, ATS testing, and generator start-up.• Authorized approval of hold points inspections, installation tests, and field inspection sheets on Mechanical and Electrical construction of New Exchange Buildings.

Mar 1997 - Feb 1999

Hvac & Plumbing Designer / Drafter

Bickford And Spaeth Associates

New Jersey, United States

• Project Involvement: School, Offices, and Public Library• HVAC system design, load calculations using elite & carrier software, equipment selection (per assistance of manufacturer engr. representative computer selection recommendation), ductwork layout and sizing using ductulator.• Plumbing system design and layout, sizing DWV & Water distribution.

Feb 1994 - Jan 1997

Hvac And Plumbing Draftsperson

Yoder Engineering Consulting

Colorado, United States

• Project Involvement: Custom Homes, Offices, and Restaurant.• Participate in design layout, sizing, and drafting for HVAC and Plumbing systems.

Jul 1992 - Dec 1993
Team & coworkers

Colleagues at MacDonald-Bedford LLC

Other employees you can reach at macdonaldbedford.com. View company contacts for 30 employees →

1 education record

Ray Rivera education

FAQ

Frequently asked questions about Ray Rivera

Quick answers generated from the profile data available on this page.

What company does Ray Rivera work for?

Ray Rivera works for MacDonald-Bedford LLC.

What is Ray Rivera's role at MacDonald-Bedford LLC?

Ray Rivera is listed as Construction Oversight Engineer and Mechanical and Plumbing at MacDonald-Bedford LLC.

Where is Ray Rivera based?

Ray Rivera is based in Guam while working with MacDonald-Bedford LLC.

What companies has Ray Rivera worked for?

Ray Rivera has worked for Macdonald-Bedford Llc, J&R Design Construct, Meinhardt Saudi Arabia, Mohammad Al-Mojil Group Mmg, and Oger International Abu Dhabi.

Who are Ray Rivera's colleagues at MacDonald-Bedford LLC?

Ray Rivera's colleagues at MacDonald-Bedford LLC include Dale Arnold, David Mello, David Watson, Judy Hale, and Donald Masongo.

How can I contact Ray Rivera?

You can use AeroLeads to view verified contact signals for Ray Rivera at MacDonald-Bedford LLC, including work email, phone, and LinkedIn data when available.

What schools did Ray Rivera attend?

Ray Rivera holds Bachelor'S Degree, Mechanical Engineering from University Of Santo Tomas.

Find 750M verified contacts

Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.

People with similar names

Check these profiles if this is not the Ray Rivera you were looking for.

View similar profiles