• Working closely with OCC staff including Train Operators, Train Crew Supervisors and Duty Managers.• Executing the Operating plan and level of service required each day to meet the needs of the Project.• Notifying the general public through the PA systems of service adjustments.• Dispatching trains in accordance with the Operating Plan.• Work closely with maintenance team for service dispatch and Train yarding. • Closely monitor all Control systems including… Show more • Working closely with OCC staff including Train Operators, Train Crew Supervisors and Duty Managers.• Executing the Operating plan and level of service required each day to meet the needs of the Project.• Notifying the general public through the PA systems of service adjustments.• Dispatching trains in accordance with the Operating Plan.• Work closely with maintenance team for service dispatch and Train yarding. • Closely monitor all Control systems including Agility/ICS/SCADA/Maximo.• Communicating with all stakeholders including TransEd staff as well as the City of Edmonton, ETS etc. Show less

• Coordinating with the sales and marketing team regarding product development.• Reading & Understanding assembly drawing and complying as per the customer demand.• Preparing the daily check sheets regarding product for further working.• Filling Excel sheets regarding daily progress of the assembly line.• Greeting visitors on the assembly line and providing a detail overview of the activities being performed.• Complying with the directions of the senior management regarding… Show more • Coordinating with the sales and marketing team regarding product development.• Reading & Understanding assembly drawing and complying as per the customer demand.• Preparing the daily check sheets regarding product for further working.• Filling Excel sheets regarding daily progress of the assembly line.• Greeting visitors on the assembly line and providing a detail overview of the activities being performed.• Complying with the directions of the senior management regarding improvement in product assembly.• Verifying the product assembly with the technical specifications.• Keeping a track record of the material available for product assembly and updating the senior management regarding the inventory available on floor.• Inspecting the final product and taking notes on the faults before forwarding to the quality department.• Supervising the activities of other workers and suggesting improvements while making sure that work is being carried out as per the work ordfer.• Replying to the queries raised by the quality department and exchanging notes on critical assembly issues. Show less

• Supervising and performing Power transmission and Power Cut off through SCADA (Keyvia Electric, PSCADA).• Operating and monitoring equipment like station lightning, Chillers, Air handling units, Water pumps, Platform screen doors, Elevators and Escalators through Building Automation System (Tsinghua Tongfang Co. Ltd).• Managing Train Operations in normal and Peak hours using Casco equipment from Operations Control Centre (OCC).• Preparing Incident investigation reports by taking… Show more • Supervising and performing Power transmission and Power Cut off through SCADA (Keyvia Electric, PSCADA).• Operating and monitoring equipment like station lightning, Chillers, Air handling units, Water pumps, Platform screen doors, Elevators and Escalators through Building Automation System (Tsinghua Tongfang Co. Ltd).• Managing Train Operations in normal and Peak hours using Casco equipment from Operations Control Centre (OCC).• Preparing Incident investigation reports by taking station attendant and station master in close coordination.• Suggesting improvement in Operational practices based on the customer feedback.• Conducted criticality meetings with reliability department and assigned criticality to electrical equipment such as bus bars, switch gears, oil immersed transformers, dry type transformers, traction transformers, generators, isolators, CTs, PTs, tap changers, bus risers, motor control centers, distribution panels, air handling units, escalators etc.• Identified maintenance strategies PM/CM/CBM, prepared maintenance procedures, check sheets, spare part list for maintenance activities related to 132kV/33kV H.V. substations, 33kV/400V (low voltage equipment) substations and 33kV/.590kv substations (DC 750V traction supply).• Identified maintenance strategies PM/CM/CBM, prepared maintenance procedures, check sheets for building HVAC system, escalators and elevators etc.• Reviewed post maintenance activity check sheets and provide necessary feedback if any improvement is required.• Contacted vendors to get budgetary quotations and other required technical information.• Performing a comprehensive Job Hazard Analysis (JHA) and educate the site staff regarding the latest happenings.• Coordinated with electricians, technicians for routine PM/CM and equipment failures.• Prepared incident report in case of sudden breakdowns and sharing with the senior management for the necessary feedback. Show less

• Supervised the Tower assembly, erection and inspection of SGM, AGM, DGM, DS1, DA1 and DD1 Towers according to ASTM A572 & ASTM A36.• Ensured the proper torque, tightening and mark of the bolts and U-bolts during inspection as per ASTM A325 or ISO 898.• Inspection of the SGM, AGM, DGM, DS1, DA1 and DD1 towers.• Monitored contractor(s) day to day progress in association with the Client representative and resolved problems at site to achieve scheduled targets.• Performing regular… Show more • Supervised the Tower assembly, erection and inspection of SGM, AGM, DGM, DS1, DA1 and DD1 Towers according to ASTM A572 & ASTM A36.• Ensured the proper torque, tightening and mark of the bolts and U-bolts during inspection as per ASTM A325 or ISO 898.• Inspection of the SGM, AGM, DGM, DS1, DA1 and DD1 towers.• Monitored contractor(s) day to day progress in association with the Client representative and resolved problems at site to achieve scheduled targets.• Performing regular site visits and making sure that work is carried out as per the technical specifications.• Supervision of the erection of SGM, AGM, DGM, DS1, DA1 and DD1 Towers according to ASTM A572 & ASTM A36.• Inspected the disc type insulators according to ANSI & Drake conductor as per ASTM standards B498, B232 AND B230 and comply their other accessories with the approved drawing and specification provided.• Maintaining minimum safety standards at the site and providing basic safety awareness to the site staff.• Order and schedule material delivery and keeping a complete record of the material available on site.• Assisting field crews in the interpretation of the drawings and various technical specifications.• Conducting daily on site meetings and educating the field crew regarding site safety.• Performing job hazard analysis and issue instructions for the overall safety of the site crews.• Kept close liaison between various formations of the stakeholders, review and monitor Contractor’s progress and prepare and submit to Client monthly progress reports on physical progress of works. • Issuing RFI’s for design related queries.• Recommend changes in project schedule and design changes in order to meet the client demand.• Verifying the contractor’s invoice with the onsite work progress and giving approval for further action.• Keeping a track record of the material stacked on site and preparing the material reconciliation report at the end of the project. Show less

• Prepared electrical/Lighting design of the industrial and commercial buildings • Calculated the size of Circuit Breakers, Transformers, Generators and PFI panels• Calculated total length of electric cable required and arrange all the related electrical resources required for completion of any electrical engineering related projects• Established the delivery and installation schedules for electric machines, switchgear, cablings etc.• Calculated the connected and demand electric… Show more • Prepared electrical/Lighting design of the industrial and commercial buildings • Calculated the size of Circuit Breakers, Transformers, Generators and PFI panels• Calculated total length of electric cable required and arrange all the related electrical resources required for completion of any electrical engineering related projects• Established the delivery and installation schedules for electric machines, switchgear, cablings etc.• Calculated the connected and demand electric load from the lighting and power lay out.• Preparing Bill of Quantities/Materials and complying with the drawing quantity.• Assist in preparation of shop drawings and as built drawings.• Inviting quotations from various vendors for the procurement of site material.• Finalizing the vendors from the approved vendor list based on the quotations submitted.• Performing material take off from construction drawings.• Preparing technical submittals and assisting design engineer in performing basic engineering calculations. Show less