Scott T. Email & Phone Number
Who is Scott T.? Overview
A concise factual answer block for searchers comparing this professional profile.
Scott T. is listed as Designer/Estimator @ GAI Consultants, Inc. | Pipeline Bending & Engineering at GAI Consultants, Inc., a company with 973 employees, based in Clearfield, Pennsylvania, United States. AeroLeads shows a matched LinkedIn profile for Scott T..
Scott T. previously worked as Pipeliner-Local 66 at International Union Of Operating Engineers and Sideboom Instructor at International Union Of Operating Engineers. Scott T. holds Heavy Equipment Operator, Installation Of Cross-Country Pipelines, Journeyman from The Western Pennsylvania Operating Engineers Joint Apprenticeship & Training Program.
Email format at GAI Consultants, Inc.
This section adds company-level context without repeating Scott T.'s masked contact details.
Review company-level records connected to Scott T. before choosing the right outreach path.
About Scott T.
The past 10 years, I mainly focused on precisely Engineering/Bending pipe for various transmission, gathering & distribution pipeline projects throughout the Country. I worked on a variety of other diffetent crews also (Stringing back to Hydro Testing). Mainly I try to work on the "Front End", whether it is operating, engineering or a being foreman. During the winter months I was a Pipeline Sideboom Instructor for the International Union of Operating Engineers. Travelling to multiple I.U.O.E.-Training Facilities throughout the Country. Instructing 8 Journeyman Operators for 3 weeks. Educating them on how to safely & efficiently drive a Live/Hydraulic Sideboom.Prior to joining the Local 66 Apprenticeship Training Program, I worked for a local Stainless Steel Pressured Vessel Manufacturer. In 1999 while in High School, I acquired a position sweeping the shop floors & handing out parts to the Fabricators. After I graduated, I was accepted toTriangle Tech in DuBois, Pa for Mechanical Drafting. All while still maintaining a full-time job. Directly after college, I was promoted into the Drafting Department. In 2004, the company offered me to fully pay for my tuition/fees to Penn State University for Mechanical Engineering. Only stipulation was that I had to maintain my full time Drafting Position. I attended Penn State Altoona full-time, plus I took Summer courses. I was promoted into the Estimating Department in 2007. A few months later in 2008, I was promoted again into the Sales Department as a Process Engineer. I ended up staying there until I decided to join Local 66 Apprenticeship Training Program in 2009.
Scott T.'s current company
Company context helps verify the profile and gives searchers a useful next step.
Scott T. work experience
A career timeline built from the work history available for this profile.
Pipeliner-Local 66
CurrentI mainly focused working on Pipeline Projects throughout the 4 years of my Apprenticeship. While attendeding, I managed to acquire my O.S.H.A 30 Hr, M.S.H.A. 40, Class A-Pennsylvania CDL License, N.C.C.O. Hand Signal Cert., N.C.C.O. Rigging Cert., Large & Small Hydraulic, Lattice Boom & Truck Crane N.C.C.O. Permit & Cert., Forklift Cert., Pipeline Training.
Sideboom Instructor
6 months a year I would travel to various Union Training Facilities. Every 3 weeks I would instruct 8 students (2 Live 72's & 2 PL61's) for 3 weeks, 60 hrs a week (2 hrs a day in the classroom & 8 hrs a day in the field. Teaching the students the proper Safety & Operating Technique of both Live & Hydraulic Sidebooms followed up with a Timed Course that the.
Bending Foreman
Ensure that the Gas Companies Pipe was properly bent to their specifications & also meet or exceed D.O.T. Regulations
Tie-Ends [Hill Crew]
Tie-In loosens & stove pipe in steep terrain where Winch Tractors were needed.
Bending Machine Operator
Responsible for bending & accurately ensuring the correct bends & degrees were in 50 miles of 16" pipe for Vermont Gas.
Bending Machine Operator
Emergency Dig Up & Relay for 3 miles of 30" pipe for Spectra Energy.
Bending Machine Operator
Engineered & Bent 6 mile of 24" for Baltimore Gas & Electric.
Live Sideboom Operator
Drove a tractor on 5 mile of 24" dig-up & relay for Dominion
Set-In Tractor Driver
Drove Set-In Tractor on 24 mile of 24" for Chesapeake Energy.
Bending Tractor Driver
Drove the Bending Tractor on 9 mile of 30" for Spectra Energy.
Bending Machine Operator
Ran the bending machine on 12 mile of 24", 16 mile of 16" & a few thousand feet of 12" & 8" on spurs off the Mainline for Shell Energy.
Operator
Ran various pieces of equipment working with Local 798 on Fabrication for an existing Transmission Line.
Bending Machine Operator
Ran the Bending Machine on 7 Mile of 24" for Sunoco Lp.
Bending Machine Operator
Broke out running the Bending Machine on 5 mile of 16" for Sunoco Lp
Hoe Operator
Ran a Hoe on Secondary Clean-Up for 81 miles of 24" for Dominion.
Colleagues at GAI Consultants, Inc.
Other employees you can reach at gaiconsultants.com. View company contacts for 973 employees →
Bryce Rammler-Young
Colleague at Gai Consultants, Inc.Kissimmee, Florida, United States, United States
View →
TP
Thomas Powell, P.E.
Colleague at Gai Consultants, Inc.Royersford, Pennsylvania, United States, United States
View →
MF
Mark Foster
Colleague at Gai Consultants, Inc.Wayne County, West Virginia, United States, United States
View →
RS
Robert Schoolcraft
Colleague at Gai Consultants, Inc.Elkview, West Virginia, United States, United States
View →
AR
Austin Rumbaugh, Eit
Colleague at Gai Consultants, Inc.Greater Pittsburgh Region, United States
View →
RL
Robert Lockridge
Colleague at Gai Consultants, Inc.Winter Springs, Florida, United States, United States
View →
RS
Robert Sabo
Colleague at Gai Consultants, Inc.Indiana, Pennsylvania, United States, United States
View →
ML
Michael Lott
Colleague at Gai Consultants, Inc.Glen Allen, Virginia, United States, United States
View →
KL
Kirsten Lipsky
Colleague at Gai Consultants, Inc.Pittsburgh, Pennsylvania, United States, United States
View →
HA
Henry Alexander
Colleague at Gai Consultants, Inc.Franklin, Tennessee, United States, United States
View →
Scott T. education
Heavy Equipment Operator, Installation Of Cross-Country Pipelines, Journeyman
Bachelor'S Degree, Electro-Mechanical Engineering
Associate'S, Mechanical Drafting, 3.4 Qpa
Frequently asked questions about Scott T.
Quick answers generated from the profile data available on this page.
What company does Scott T. work for?
Scott T. works for GAI Consultants, Inc..
What is Scott T.'s role at GAI Consultants, Inc.?
Scott T. is listed as Designer/Estimator @ GAI Consultants, Inc. | Pipeline Bending & Engineering at GAI Consultants, Inc..
Where is Scott T. based?
Scott T. is based in Clearfield, Pennsylvania, United States while working with GAI Consultants, Inc..
What companies has Scott T. worked for?
Scott T. has worked for Gai Consultants, Inc., International Union Of Operating Engineers, Michels Corporation, Welded Construction, L.P., and Henkels & Mccoy, Inc..
Who are Scott T.'s colleagues at GAI Consultants, Inc.?
Scott T.'s colleagues at GAI Consultants, Inc. include Bryce Rammler-Young, Thomas Powell, P.E., Mark Foster, Robert Schoolcraft, and Austin Rumbaugh, Eit.
How can I contact Scott T.?
You can use AeroLeads to view verified contact signals for Scott T. at GAI Consultants, Inc., including work email, phone, and LinkedIn data when available.
What schools did Scott T. attend?
Scott T. holds Heavy Equipment Operator, Installation Of Cross-Country Pipelines, Journeyman from The Western Pennsylvania Operating Engineers Joint Apprenticeship & Training Program.
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trialCheck these profiles if this is not the Scott T. you were looking for.
View similar profiles