Simone Brazzo Email & Phone Number

Bolzano, Trentino-South Tyrol, It

Bolzano, Trentino-Alto Adige, Italia

Management and coordination of cabs & hulls design team of multirole, armored, amphibious, wheeled and tracked vehicles. Management of the design of the cab, hull, anti-mine kit and ballistic protection kit and interior and exterior installations (seat structures, equipment, periscopes, hatches, doors, rear ramps,...); working with other product design departments to design the complete vehicle. Design management starting from the prototypal phase of the vehicle to the start of production; support to manufacturing dept. for the mass production and to quality dept. for the claims. Supervision of design activities and active cooperation with Project Leaders and Chief Engineers of various projects. Management of the drafting of the technical documentation of my dept. (SSS, SSDD, ER, SOW,…). Supervision and coordination of design tasks required for external design centers. Technical management of the suppliers, change requests and improvement proposals related to all parts of the cabs, hulls and related interior and exterior installations. Active cooperation with Concept Simulation & Concept Protection departments for design of anti-mine kits, ballistic protection kits and development of test rigs and mockups for industrial blast and ballistic testing campaign. Support and collaboration with Plant Quality, Plant Manufacturing, Launch Management, Customer Service, Product Validation, Purchasing and Sales departments. Resource management and related planning according to company and project priorities. Staff training management. Active participation in Technical & Design Reviews and industrial and homologation test. Tender: analysis of the program of requirements, drafting of technical documentation (technical specifications, engineering reports,…) in response to PoR and management of the design of the prototypes and pre-series.

Bolzano, Trentino-Alto Adige, Italia

Management and coordination of the armored cab (hull) design team of amphibious, wheeled and tracked armored vehicles. Setting up the design of the hull, anti-mine and ballistic protection kit, and interior and exterior installations (seat structures, equipment, periscopes, hatches and hatches,...); working with other product design depts. to produce the complete vehicle. Design management from prototype stages to vehicle start of production; support to manufacturing dept. for the mass production and to quality dept. for the claims. Supervision of design activities and active cooperation with Project Leaders and Chief Engineers of various projects. Management of the drafting of the technical documentation of my dept. (SSS, SSDD, ER, SOW,…). Supervision and coordination of design tasks required for external design centers. Technical management of the suppliers, change requests and improvement proposals related to all parts of the cabs, hulls and related interior and exterior installations. Active cooperation with Concept Simulation & Concept Protection departments for design of anti-mine kits and direct firing protections. Support and collaboration with Plant Quality, Plant Manufacturing, Launch Management, Customer Service, Product Validation, Purchasing and Sales departments. Resource management and related planning according to company and project priorities. Staff training management. Active participation in Technical & Design Reviews and industrial and homologation test. Tender: analysis of the program of requirements, drafting of technical documentation (technical specifications, engineering reports,…) in response to PoR and management of the design of the prototypes and pre-series.Supporting the Concept Development & Concept Protection for the design and development of test rigs and mockups for industrial blast and ballistic testing.

Bolzano, Trentino-Alto Adige, Italia

Research and development of ballistic protection for armored vehicle; management of related shooting testing campaign at specialized shooting ranges, both for industrial and customer certification testing campaign (MoD). Management of the design of the protection, starting from the research of the best materials and stratigraphy for satisfy the ballistic requirements (threat level, weight-to-ballistic performance ratio and cost) moving to the prototype production and industrial test and concluding with the certification with the customer and the start of production. Technical coordination of the suppliers and management of characterization and testing activities with universities and laboratories. Management of projects related to ballistic protection of armored vehicles (Multirole, Armored and Amphibious). Technical point of contact for the prototype and mass production of the ballistic protections. Research, development and testing of new materials and production technologies. Cooperation with Product Design, Engineering & Validation, Quality, Manufacturing and Purchasing departments.

Bolzano, Italia

Research and development of innovative technologies with a view to improve existing industrial processes. Research and development of innovative materials with a view to continuous improvement (weight & cost saving). Active coperation with Plant Quality, Plant Manufacturing, Customer Service, Product Design & Product Validation departments. Setup, development and management of test plans for satisfying the technical specifications for materials and industrial processes. Research and development of ballistic protections for military vehicle. Management, setup and development of durability tests on military vehicle and components. Active participation in ballistic protection certification procedures through shooting range activities. Collaboration and technical coordination of suppliers. Collaboration and management of basic characterization activities of innovative materials with universities.

Bolzano, Italia

Design of multirole light military vehicle cab components. 3D and 2D design using Catia V5 and integration with vehicle BOM management software (Teamcenter - MatrixOne). Supporting the Prototype and Testing department in the prototypal phase and in the mass production of the vehicle. Collaboration with suppliers in the design phase. Collaboration in the processing of D-FMEA. Cooperation with Plant Quality and Customer Service departments. Design from a structural, ballistic and functional point of view of protection kit for light multirole vehicles. Support the Purchasing and Manufacturing dept. for the resolution of the SREA, MR and PIR. Drafting of the technical documentation (Engineergin reports, test plan,…) and support the Chief engineer of the project.

Bolzano, Italia

Individuazione dei fattori di rischio, delle misure per la sicurezza e per la salubrità degli ambienti di lavoro e valutazione dei rischi nel rispetto della normativa vigente sulla base della specifica conoscenza dell’organizzazione aziendale. Elaborazione, per quanto di competenza, delle misure preventive e protettive, nonché i sistemi di controllo di tali misure; elaborazione delle procedure di sicurezza per le varie attività aziendali. Gestione e proposta dei programmi di informazione e formazione dei lavoratori;Partecipazione alle consultazioni in materia di tutela della salute e sicurezza sul lavoro, nonché alla riunione periodica di cui all’art. 35. Fornire ai lavoratori le informazioni sui rischi per la salute e la sicurezza connessi all’azienda in generale, sulle procedure di primo soccorso, antincendio ed evacuazione, sui nominativi del RSPP degli addetti al SPP e del medico competente, sugli addetti al servizio di primo soccorso ed antincendio. Informazione sui rischi specifici dell’attività svolte dai singoli lavoratori e sulle norme di sicurezza, nonché sulle disposizioni aziendali in materia; sui pericoli derivanti dall’uso di sostanze e preparati pericolosi, sulle misure e le attività di protezione e prevenzione adottate. Collaborazione alla stesura del Documento di Vautazione dei Rischi e dei DUVRI. Miglioramento dei processi e luoghi aziendali al fine di rispettare le normative vigenti in materia di sicurezza e salute sul lavoro. Collaborazione con RLS e medico del lavoro.

Laghetti Di Egna - Bolzano - Bz

Quality management during new product development, in collaboration with the customer and the design department, in order to produce high quality products which meet the customer specifications.Collaboration on feasibility analyses of new products;Assisting with sampling and coordinating product validation activities in collaboration with the Laboratory;Monitoring, preparation and execution of DVP and PVP;Measurement and reporting of sampling, documentation and archiving of results on parts under development (pre-series);Statistical measurements on the capabilities of a pre-series process with subsequent analysis and archiving of results;Defining control methods and plans (including tools) for prototypes, pre-series and series, relaying the information to the QSP (Quality Manager in Production);Collaboration in the processing of D-FMEA and P-FMEA;Recall management on prototypes, samples and pre-series;Maintaining direct contact with customer and/or suppliers regarding quality planning;Lean Development;DOE - Design of Experiments;Product homologation: management and organization of laboratory tests and analysis of results.

Disegni tecniciCalcolo sforzi di progettoRealizzazione e caratterizzazione di materiali compositiUtilizzo di software agli elementi finiti e di modellazione di materiali compositi tecnologici.

Bolzano

Collaboratore e istruttore sportivo presso la palestra Fit-Star di Bolzano.

Bolzano, Italia

Collaboratore in azienda di famiglia. Installazione componenti elettrici e meccanici; magazziniere; riparazione e installazione di server aziendali; collaborazione alla dichiarazione di conformità dei dispositivi medici; consulente tecnico.

Ingegneria Dei Materiali, Indirizzo Biomedicale, 110/110 E Lode

Activities and Societies: Principali materie e abilità professionali: analisi strumentale e controllo dei materiali; materiali metallici.

Ingegneria Industriale, Laurea In Ingegneria Industriale, 95/110

Activities and Societies: Principali materie e abilità professionali: scienze delle costruzioni; scienze e tecnologie dei materiali.

Diplomato, Percorso Tradizionale, 71/100