• As a site leader for Machinery and Electrical, mainly carried out inspection for piping and electrical outfitting, piping systems installation, hydraulic test, and flushing test.作为机电现场负责人，主要负责管道和电气舾装件、管道系统安装、液压试验和冲洗的检查• Sighting and Alignment installation for Shafting and Rudder System, force fitting stern bearing and the propeller, inspection for installation of stern sealing, measured Sag and Gap for shaft coupling, loading test for shaft bearing, installation of shafting bolts， including rudder system installation.轴系和舵系的照光对中，艉轴轴承和螺旋桨的压装，尾轴密封安装的检查，轴联轴器的间隙的测量，轴承的载荷试验，轴系螺栓的安装，包括舵系系统安装。• Attended major equipment FATs of M/E, G/E, Boiler, MSB, Windlass etc.参加主要设备的工厂试验，比如主机，发电机，锅炉，主配电板，锚机等等。• Inspection for installation and function test of M/E、G/E、Boiler and other equipment, including those related to the piping system, tank outfitting, and tank cleanliness.检查主机，发电机，锅炉和其他设备的安装和功能试验包括相关的管路系统，舱室舾装件，舱室清洁。• Inspection for installation and function test for deck machine including windlass and winches、crane test.检查甲板机械的安装和功能试验，包括锚绞机和克令吊试验。• Inspection for electrical equipment, such as MSB, ESM, PMS, EX-PROOF equipment, Alarm Systems, panels, cables, etc.检查电气设备，比如主配电板，应急配电板，自动电站，防爆设备，警报系统，控制箱和电缆等等。• Inspection for Fire Fighting System and life-saving equipment as per SOLAS, LSA, and FSS Code.依据 SOLAS 公约，国际消防安全系统规则，国际救生设备规则检查消防系统和救生设备。Reviewed the design drawings as per class rules, SOLAS, MARPOL, and IMO regulations.依据船级社规范,SOLAS,MARPOL 和 IMO 规则审查设计图纸。• Attended inclining test and sea trial etc...参加倾斜试验和试航等。• Attended the project meeting with classification society surveyors and shipyard delegates every week.每周和船检以及船厂代表参加每周项目会议。• Cooperated with the crew to complete delivery work.配合船员完成交船工作

• Managed all the preservation teams for MODEC SANGOMAR FPSO Project Topside in Tianjin BOMESC Yard, executed the Preservation routine in accordance with Project preservation specification & manufacturer’s preservation procedure to maintain the integrity of equipment&systems.• Executed preservation inspection/routine per Preservation Work List task for an equipment. (Like Motor, Heat Exchangers, Compressors Generators, Electrical Panels, Various instruments and piping etc.)• Managed the Quality Preservation and cleanliness regime that provided assurance that FPSO equipment remained in good condition and operated at all stages throughout the project.• Ensured the Quality Preservation and cleanliness regime is consistently implemented from Warehouse/Storage Phase, Construction Phase, Commissioning Phase and final handover to Operations.• Issued the NCR or Damage Report when found brutal construction practices and any damage on materials or equipment on site.• Implemented and Maintained a Preservation Records System to demonstrate compliance to the preservation regime and assure integrity of equipment.• Co-ordinate with Preservation Engineer ensure preservation requirements are clearly identified.• Mastered the knowledge to use the VPCI Product to make sure all the materials and equipment of Sangomar Project in good condition.• Managed and audited Yard Resources to ensure de-preservation / re-preservation is properly implemented and recorded:• Managed and controlled use, storage and safe disposal of preservation chemicals and materials.• Identified and managed resources for preservation activities during long term storage / transportation.

— As a site senior surveyor for Hull， Machinery, and Electrical, mainly carried out inspection for blocks, erection, piping pre-fitting、piping systems installation 、hydraulic test, piping welding, piping jointed, reviewed RT film of piping welding, random inspection PT, MT, UT for piping welding.— Sighting and Alignment installation for Shafting and Rudder System, M/E 、G/E and Boiler and other equipment installation、M/E mooring test、G/E loading test、MSB function test, etc..—Function test for boiler, G/E, oily water separator, pumps, hydraulic oil units, remote control valves system, quick-closed valves system, fire fighting system, etc.— Installation and function test for deck machine including windlass and winches、crane test.— Inspection for Fire Fighting System and life-saving equipment.— Inspection for cable laying-out and electrical equipment installation, Alarm System 、Navigation System, and Radio Communication System. — Attended mooring system、inclining test and sea trial etc...— Attended the project meeting with shipowners and shipyard delegates every week.

— As a site leader for Machinery and Electrical, mainly carried out inspection for piping pre-fitting、piping systems installation 、hydraulic test and flushing.— Sighting and Alignment installation for Shafting and Rudder System.— Function Test for M/E 、G/E 、Boiler 、and other equipment installation、M/E mooring test、G/E loading test、MSB function test etc..— Installation and function test for deck machine including windlass and winches、crane test.— Inspection for Fire Fighting System and life-saving equipment.— Inspection for cables laying-out and electrical equipment installation, Alarm System 、Navigation System and Radio Communication System. — Attended mooring system、inclining test and sea trial etc..— Attended the project meeting with classification society surveyors and shipyard delegate every week.— Cooperated with crew to complete delivery work.

- Carried out inspection for FPSO project, moudule structure fit-up, welding, piping material identification, piping fittings identification, piping fit-up, welding, hydraulic test etc.- Carried out inspection for FPSO topside mechanical equipment installation, alignment measured, commissioning function test.- Carried out inspection for electrical&instrument of FPSO moudules installation, commissioning function test etc.- Welding survey including welding consumable storage, welder qualification, welding preparation, WPS, WPQR.- Witnessed PT,MT,UT and reviewed RT reports and films.- Installation and hydraulic test for piping systems, such as ballast water system, bilge system, compressing air system, fule oil system, lub. oil system, hydraulic oil system, steam system etc.- Shafting and rudder system alignment inspection, sighting, stern bearing installation,shaft installation, sag&gap measured, bearing load test, main engine installation etc.- Mooring test for M/E,G/E, S/E, Boiler, compressors,incinerator, bilge water separator, pumps etc.- Sea trial test and delivery

- Carried out inspection for blocks, pre-erection and erection for Hull.- Carried out inspection for vacuum test, air test, strength test for tanks.- Carried out inspection fit-up, pre-heating for casting welding, rudder, rudder horn, crane foundation etc.- Carried out loading test for cranes, pilot ladders.- Principal scale measurement for Hull, bottom survey before launching.- Welding survey including welding consumable storage, welder qualification, welding preparation, WPS, WPQR.- Witnessed PT,MT,UT and reviewed RT reports and films.- Installation and hydraulic test for piping systems, such as ballast water system, bilge system, compressing air system, fule oil system, lub. oil system, hydraulic oil system, steam system etc.- Shafting and rudder system alignment inspection, sighting, stern bearing installation,shaft installation, sag&gap measured, bearing load test, main engine installation etc.- Mooring test for M/E,G/E, S/E, Boiler, compressors,incinerator, bilge water separator, pumps etc.- Sea trial test and delivery

— Mainly in charge of the production management of Hull Department , distributing the manpower、drawing up the schedule for production and controlling the progress as well as quality and safety management.— Carried out the daily patrolling in the hull area and required to rectify if any problem found.— Had the project meeting with shipowner representative and classification society surveyor, solved the comments mentioned during the inspections.— solved the problems of drawing mentioned by shipowner or surveyor with design department.

— Made department production plan, arrange production manpower reasonably, coordinate all kinds of problems in production engineering, control production cost, etc— Followed the shipowners and surveyors to complete all the daily inspection and recorded all the comments to complete the modification.— Prepared the weekly progress report to department manager.— Coordinated the technical problems during production with shipowner and surveyor.

— Assisted the manager to complete the production schedule, manpower control.— Followed the shipowners and surveyors to complete all the daily inspection and recorded all the comments to complete the modification.— Mainly in charge of the production for rudders, pre-installation of rudder pintles, rudder stock, installation of rudder on board, force fitting for stern bearing and propeller etc. — Prepared the weekly progress report to department manager.— Coordinated the technical problems during production with shipowner and surveyor.