Stuart Harrison Email & Phone Number

Cardigan, Gb

Weymouth, England, United Kingdom

Wales, United Kingdom

Bath, England, United Kingdom

Process Commissioning Engineer for Wessex Water.

Felin Fach, Wales, United Kingdom

Hendy Wind Farm, Penybont

South West Wales

Instrument and Electrical Commissioning Engineer for new and upgrade Welsh water projects.

Valero Refinery, Pembroke, Wales

Oversee Instrument and Electrical installation on the Project Execution Team.Ensure that the project is built as per design, Atex Regulations, Specification.Liaise with the Instrument Electrical Contractor to ensure materials are available for the project.Ensure Site Safety rules and regulations are adhered too.Permit Audits, LPSA, LPO observations are carried out.Attend Monthly safety talks.No permit issues to ensure timely project execution.Complete QA/QC work pack.Loop check and commission new installed instrumentation back to DCS as per data sheets and loop drawings.

Milford Haven

Installation of the tank overfill and protection system.Complete QA/QC package.Testing and commissioning of the overfill system.Liaise with the electrical department for shut down signal to MOV's.

Kashagan, Kazaghstan

Senior Instrument Commissioning Engineer for the Sulphur, Sour water stripper, flare, slug catcher, import and exprt lines at the Kashagan onshore facility, Eskene West, Atyrau, Kazaghstan.

Saudi Arabia

Instrument, Electrical, HVAC, Fire ALarm Control

Consultant Engineer for the construction, installation, testing and commissioning of the Instrument, Telecom and HVAC systems at the King Abdullah University for Science and Technology to Aramco Standards.HSE Company procedures are followed and communicated to the workforce.Leading a work force of 2 Expat Engineers, 62 Indian and Philippine technicians.Installation of HVAC, Power distribution 120v single phase and 380v three phase systems. Installation or instrument and control systems for the building management systems.Installation of CAT 6a telecommunication network, high speed fibre optic internet to Aramco StandardsEnsure construction schedules are published and target dates met. Identify material issues and ensure delivery dates are met. Maintain effective communication with the client. Strive to minimize cost and awareness of budget restraints.. Drawings are red lined prior to hand over. RFI's are raised and TQ's answered. Mentoring of Technicians and identifying shortfalls and training requirements. Tool box talks are given and recorded.

Saudi Arabia

Consultant Engineer for the Installation, Inspection, Testing and Commissioning of the Instrument and Telecom systems at the King Abdullah University for Science and Technology. * HSE Company procedures are followed and communicated to the workforce. * Leading a work force of Expat Engineers, 42 Indian and Philippine technicians. * Installation of HVAC, Power distribution 120v single phase and 380v three phase systems. * Installation or instrument and control systems for the building management system. * Ensure construction schedules are published and target dates met. * Identify material issues and ensure delivery dates are met. * Maintain effective communication with the client. * Strive to minimize cost and awareness of budget restraints.. * Drawings are red lined prior to hand over. * RFI's are raised and TQ's answered. * Mentoring of Technicians and identifying shortfalls and training requirements. * Tool box talks are given and recorded.

CB&I, The Commissioning of the Yokogawa Centium CS3000 R3, Loop checking, commissioning and Cause and Effect testing on the Cryogenic LNG storage tanks.Liaising with the relevant vendors for warranty issues, spares and repairs. Leading 8 Instrument Technicians in Cause and Effect Testing for the commissioning of the Yokogawa DCS system for handover to the client. Up date drawings using CAD to ensure red line drawing are completed prior to hand over.

CB&I, * The Commissioning of the Yokogawa Centium CS3000 RS, Instrument Inspection, Loop checking, commissioning and Cause and Effect testing on the Cryogenic LNG storage tanks.* Liaising with the relevant vendors for warranty issues, spares and repairs. * Leading 8 Instrument Technicians in Cause and Effect Testing for the commissioning of the Yokogawa DCS system for handover to the client. * Up date drawings using CAD to ensure red line drawing are completed prior to hand over.

Construction, Installation, Commissioning, Loop Checking, Cause and Effect testing back to the Yokogawa Centium CS3000 R3 of the 2 Berth and Jetty Control Room and pipe line construction project at the South Hook LNG Terminal. Preparation of Scope of work, Costing. Construction of the project to the specification required and International Standards, ISO, API, ASTM, BSI, EN, IEC, ATEX, CE Following safety procedures and quality objectives. N2 and HE pipework testing to ISO 3183-2-1990 Preparation of requirements and cost estimates for engineering changes. All areas of HSE to 5 supervisors and 54 employees to achieve Zero lost time accidents and incidents. Ensure construction schedules are published and target dates met. Resolution of Manpower and industrial issues, Material requirements, orders, availability and delays using SAP Carry out work force assessment, identify shortfalls and training requirements. To offer engineering support, direction and leadership to the work force and other members of the construction management organization. Liaise with other contractor companies to meet common objectives. Resolution of instrument and electrical technical queries. The installation of all systems was to the clients specification and drawings. Strive to minimize cost and schedule impacts from engineering changes. Maintain documentation and as built drawings in accordance with the technical integrity and operational requirements. Lead the Instrument, Electrical, Fire and gas systems commissioning. Ensure the commissioning schedule was followed and target dates met. Lead the Cause and effect testing from the field, to the Yokogawa DCS Documentation and red line drawings using CAD were completed prior to handover to the client. This project was completed ahead of schedule and within budget.

Construction, Inspection, Installation, Commissioning, Loop Checking, Cause and Effect testing back to the Yokogawa Centium CS3000 RS of the 2 Berth and Jetty Control Room and pipe line construction project at the South Hook LNG Terminal. * Preparation of Scope of work, Costing. * Construction of the project to the specification required and International Standards, ISO, API, ASTM, BSI, EN, IEC, ATEX, CE * Following safety procedures and quality objectives. * N2 and HE pipework testing to ISO 3183-2-1990 * Preparation of requirements and cost estimates for engineering changes. * All areas of HSE to 5 supervisors and 54 employees to achieve Zero lost time accidents and incidents. * Ensure construction schedules are published and target dates met. * Resolution of Manpower and industrial issues, * Material requirements, orders, availability and delays using SAP * Carry out work force assessment, identify shortfalls and training requirements. * To offer engineering support, direction and leadership to the work force and other members of the construction management organization. * Liaise with other contractor companies to meet common objectives. * Resolution of instrument and electrical technical queries. * The installation of all systems was to the clients specification and drawings. * Strive to minimize cost and schedule impacts from engineering changes. * Maintain documentation and as built drawings in accordance with the technical integrity and operational requirements. * Lead the Instrument, Electrical, Fire and gas systems commissioning. * Ensure the commissioning schedule was followed and target dates met. * Lead the Cause and effect testing from the field, to the Yokogawa DCS * Documentation and red line drawings using CAD were completed prior to handover to the client. This project was completed ahead of schedule and within budget.

Set up a QA/QC document control management system within the company for ISO 9001/2008 registration. The management of client documentation for the construction of the South Hook LNG Jetty Facility.

Set up a QA/QC document control management system within the company for ISO 9001/2008 registration.*The management of client documentation for the construction of the South Hook LNG Jetty Facility.*Instrument and Electrical equipment prior to installation to ensure Atex Compliance.*Raise RFI's to witness initial calibration test prior to installation.*Completed company QAQC documentation for submittal to client.

Project Engineer, South Hook LNG Construction, Milford Haven, South Wales

Instrument and Electrical Maintenance Adviser.. The co-ordination of 10 field technicians. To control the maintenance of the DCS, Allen Bradley PLC, Instrument, Fire and Gas, Analyser systems, Gas Turbines, Compressors, HVAC and internal/external communications equipment on these platforms. Dreager H2S, Hydrocarbon, SO2 gas detection. HSE company procedures are followed and communicated to the technicians. Work orders are raised, Implemented and Completed. The permit to work system is followed. Work Procedure verification and writing for new applications. Materials issues. Identification of bad performers and provide and engineering resolution. Mentor the technicians in the class room and on the job. Carry out competency assessments of the technicians, identify the shortfalls and the training needs of the individual. Ensure the work book is completed and shortfalls addressed.

Instrument, Electrical Supervisor on the South North Sea gas rig 27A Solar gas turbine outage. Control of manpower for the outage. Ensure materials and spares are available.

Instrument, Electrical Supervisor on the South North Sea gas rig 27A Solar gas turbine outage. *Control of manpower for the outage.*Ensure materials and spares are available.*Schedule and completion dates are met.

Instrument and Electrical Maintenance Adviser on the East Kokongo offshore field. * The co-ordination of 20 field technicians for the maintenance on the Mother platform and the 4 daughter platforms. * To control the maintenance of the DCS, Allen Bradley PLC, Instrument, Fire and Gas, Analyser systems, Gas Turbines, Compressors and internal/external communications equipment on these platforms. * Dreager H2S, Hydrocarbon, SO2 gas detection. * HSE company procedures are followed and communicated to the technicians. * Work orders are raised, Implemented and Completed. * The permit to work system is followed. * Work Procedure verification and writing for new applications. * Materials issues. * Identification of bad performers and provide and engineering resolution. * Mentor the technicians in the class room and on the job. * Carry out competency assessments of the technicians, identify the shortfalls and the training needs of the individual. * Ensure the work book is completed and shortfalls addressed.

Co-ordination of 14 electricians and 10 Instrument technicians on the Black oils and White oils processing units. Planned Maintenance of all instrument systems, fire and gas, Honeywell TDC3000 DCS System and Analyser systems on the refinery. Planned Maintenance of all electrical equipment, pumps, motors, HVAC, lighting and power.Carry out planned maintenance to approved procedures. Crude Distillation, Hydrogen Recovery, Claus Sulphur Recovery, Hydro Treater, Catalytic Cracker, Vacuum Distillation and Amine Sulphur recovery Units. Crowcon Hydrocarbon, So2 and H2S gas detection. Writing new procedures for new equipment and submit for approval. Raise work orders for defective equipment. Permit to work system is used correctly Identification of bad performers and raising the documentation required. Mentor apprentice workers both in the class room and on the job. * Ensure the apprentice task book is completed and shortfalls addressed. * Ensure HSE Company procedures are followed by the work force

Instrument and Analyser maintenance at the Chevron Refinery. * Planned Maintenance of all instrument systems, fire and gas, Honeywell TDC3000 DCS System and Plant and Laboratory Analytical systems on the refinery. * Carry out planned maintenance to approved procedures. * Crude Distillation, Hydrogen Recovery, Claus Sulphur Recovery, Hydro Treater, Catalytic Cracker, Vacuum Distillation and Amine Sulphur recovery Units. * Crowcon Hydrocarbon, So2 and H2S gas detection. * Writing new procedures for new equipment and submit for approval. * Raise work orders for defective equipment. * Permit to work system is used correctly * Identification of bad performers and raising the documentation required. * Mentor apprentice workers both in the class room and on the job. * Ensure the apprentice task book is completed and shortfalls addressed. * Ensure HSE Company procedures are followed by the work force

National Power. Steam and Combined Cycle Gas turbine outages across the UK.

National Power. Steam and Combined Cycle Gas turbine outages across the UK.*Instrument Calibration, installation, set up, pre-commissioning, commissioning and start up.

The Maintenance of all Analysers. These included ABB Vista gas chromatography, oxygen, opacity, density, viscosity and moisture analysers. Planned maintenance to approved procedures. Updating procedures where required. Mentor Saudi National technicians and assist with training manual completion. Ensure competency to work under minimal supervision.

The Maintenance of all plant and Laboratory Analysers. * These included ABB Vista gas chromatography, oxygen, opacity, density, viscosity and moisture analysers. * Planned maintenance to approved procedures. * Updating procedures where required. * Mentor Saudi National technicians and assist with training manual completion. * Ensure competency to work under minimal supervision.

Reporting to the Shift Supervisor, To ensure the safe and efficient running of the plant.Planned maintenance routines carried out and logged,Routine samples taken, tested at the laboratory and results recorded,Production targets met.

Pembroke. * To carry out day to day operator duties, Instrument and Analyser fault repairs, out of normal working hours.

to Carry out Planned Maintenance, fault finding and instrument repairs.

to Carry out Planned Maintenance, fault finding and instrument repairs.

Hnd, Electrical And Electronic Engineering

O' Level Gained; S, Math; English, Physics, Engineering Drawing And Geography

CSE grade 1 in Computer studies, Wood work and Technical Drawing

O' Level Gained; S, Math; English, Physics, Engineering Drawing And Geography

CSE grade 1 in Computer studies, Wood work and Technical Drawing

Hnd Electrical And Electronic Engineering

Hnd Electrical And Electronic Engineering

Chemical Engineering

August 2007 Offshore survival course and Medical November 2007 Compex Certificate.

Chemical Engineering

August 2007 Offshore survival course and Medical November 2007 Compex Certificate.