Tom Mccarthy Email & Phone Number

Perth, Australia

for Various Clients (Functional Safety)• Mount Isa Mines Winder FSA (AS-61508)• Tetra Tech Remote Isolations FSA (AS-61508 & AS-62061)• Maari Reduction of FBHP FSA (AS-61511)• Woodside Tricon Upgrade FSA (AS-61511)• SIL review for Darwin LNG (AS-61508 & AS-61511)For Coogee Chemicals Perth• Leading a small team to complete the E&I design for a new Process (TiRO). Complete electrical and control system design using the DAD package and integrating this package within the Clients team and work practices.For ConocoPhillips Perth• Darwin LNG Instrument and control system Obsolescence Review. • Alarm Management Gap analysis. Review and report on the state of alarm management using EEMUA-191 and ConocoPhillips corporate standards for both the DLNG and offshore control systems.For Chevron Perth• Detailed design of gas wireless detection upgrades for the Chevron Barrow Island Plant. Selection and placement of sensors.• Review of site vendor packages and determining black start requirements. Development of procedures for each package as well as security/backup procedures and testing of control system equipmentFor Woodside Energy Limited• Detailed design of gas detection upgrades for the Karratha Gas Plant. Selection and placement of sensors, loop design. Installation and commissioning workpacks.For Fortescue Metals Group• Lead control systems engineer for a green fields site. Control system specification/design and implementation for the Solomon Mine site, including Ore processing facilities, Crushing Hubs, Overland conveyors and stockyard. Cimplicity SCADA, GE RX3I PLCs' using Proficy Machine Edition V7.0 and network architecture to implement a GE PPS solution.• Design and commission all aspects of the stockyard control system at Christmas Creek mine site.• Detailed design in Anticollision software, Stockpile Management and Stockyard conveyor systems.

For Woodside• Design and modify existing instrument loop diagrams to meet new site SIL requirements for the Turbine Control System Upgrade (TCSU) project.• Review current instrument loop diagrams to include Bentley Nevada condition monitoring instrument data for the TCSU project.For BHP Billiton• Developed detailed Software and Graphic standards for Mt Keith Operations based on Yokogawa Centium VP DCS. A test bed system was used to validate the developed standards on the Centium VP system. • Deliver functional specification for the current control system used at the Kalgoorlie Nickel Smelter

Cork, County Cork, Ireland

for Eli Lilly, Foxboro I/A Commissioning• Onsite in Kinsale – programming, commissioning and validating the control systems on all production and utility buildings.• Onsite technical support and design for day to day operations.• IE8 Inter/tech RBatch to I/A Batch upgrade Project.• IE28 Lab. Utilities Configuration Project.• IE16LS Cycle Time Reduction & PWEC Upgrade Project.• IE8 Final Bulk Atomox HCI Recipe modification to reduce cycle time Project• IE7 Incinerator Upgrade Phase 1 Project• IE4 Node Splitting Project.• Commissioning for new IE30 Clean Room production building.• IE16SS Batch Introduction, conversion of old sequence code to Foxboro IA Batch model.for Bord Gais, DAD Instrument loop generation.• On site at Bord Gais – Gasworks road working on generating the entire instrument loops for the Above Ground Installations (A.G.I) on the pipeline from Dublin to Galway using DAD database tool. Including inserting AGI instrument loops from existing sites around Ireland and Scotland to DAD.

Perth, Western Australia, Australia

for Eli Lilly• Commissioning the new control systems for the IEI6LS and IE3 annex Building. Phase and sequence Design/Review & Execution, Loop I/O testing (IQ/OQ), including PID tuning for both the Atomoxetine and Ractopamine products.for Schering Plough (Brinny), • Engineer configuring Intouch 7.1 to meet with 21CFR11 • Configuration of the Wonderware Intouch V7.1 to communicate to MS-SQL V6 to send batch information and operator changes.for Schering Plough (Brinny), • Automation engineer in the development of Functional Design Specification (FDS), Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for a project to make the current onsite SCADA 21-CFR-11 compliant.for 21C.F.R. part 11. Compliance• Configuring Intouch SCADA V7.1 to comply with the FDA standard 21-CFR-pt.11 for data protection and allowing for an Audit trail using SQL databases. • Automation Engineer in Development of an installation package for Intouch to comply with this regulation which could be used on any site operating with Intouch V7.1.for Schering Plough (A), • Supported as Automation Engineer in the Factory Acceptance Testing (FAT) for the Cone and Spray Dryers in Schering Plough Avondale.for Guinness (Smithwicks),• Automation Engineer for turn key development from Functional Design specification (FDS) right through to Equipment hand-over. Complete commissioning & Configuration of PLC Code for Siemens TI565, SCADA Configuration Wonderware Intouch V7.1.for Roche Ireland, • Working with the commissioning team to complete the installation of the Orlistat Annex control room and the installation of the RS3 DCS for the Orlistat Plant in Roche Co. Clare, Control for SmithKline Beacham,•Commissioning support team installing the funderback filter, PLC configuration verification and Filter sequence execution.

For WAPET, • Citect SCADA and Access VBA coding. Converting the existing Factory Link SCADA to Citect because of Y2K problems with FLINK, involved in developing a VBA program that would compare both SCADA systems and report any differences in configuration.for Santos, P.R.I.M.S (Production reporting and information management system) • Fix32 SCADA and Concept PLC Coding for Kidman Satellite station. The project involved setting up a new Modbus Plus network in Moomba to connect 15 PLC’s to 7 SCADA Nodes set up at each Satellite station around the headquarters. for Laminaria, Laminaria Hull Project• DAD, Instrument loop design for the Laminaria using the new design tool DAD.

Bsc

Leaving Certificate