Claude C. Email & Phone Number

Spruce Grove, Ab, Ca

Edmonton, Alberta, Canada

Technical Solutions/Quality Manager implementing a new quality control program resulting in the following accreditation:ABSA “Certificate of Authorization” for Construction, Repair & Alteration at Shop/Field locations for Pressure Vessels-ASME Section VIII-1; Boiler-ASME Section I Power Boilers, ASME Section IV Heating Boilers; Direct Fired Heaters-API 530 ASME B31.3 Direct Fired Heaters & ASME Section I Heating Boilers; Indirect Fired Heater Coils–ASME B31.3 Indirect Fired Heater Coils; Pressure Piping–ASME B31.3 Boiler External Piping, ASME B31.1 Power Piping, ASME B31.3 Process Piping, ASME B31.5 Refrigeration Piping, ASME B31.9 Building Services Piping; Fittings–Category A, B, C, E, F, H.ASME Accreditation for the following code designators “A”, “PP”, “S” & “U”; The NBIC “Certification of Authorization to Register” “NB” for the following ASME Designator(s): U, S, A, PP & “Certification of Authorization” to use the “R” symbol.Provide guidance to management, supervision and field inspectors on the requirements of TES Quality Manual, Code requirements and local jurisdictional.Supporting Project staff as required, including auditing and training as required,Other duties included working with IT Managed Services Providers to ensure business needs are being met or exceeded, Microsoft Office 365 E3, standardizing software and computer setup, and email signature software implementation to standardize signatures across the entire organization. The project included web filtering, virus protection, and backs ups are meeting the needs of the company.Develop 1st Edition of the Field Supervisor Orientation Guide to provide guidance on Effective Leadership, Safety, Quality, Information Management, Scheduling, Progressing, Extra Work, Tools, Equipment and Material Management & Field Administration and work with management to finalize.Assisted in the Development of the TES HSE Program Manual, Code of Practices and forms.

Canada

Devon, Alberta, Canada

Quality Manager Developing and maintaining the corporate new quality control program resulting in the following accreditation:ABSA “Certificate of Authorization” for Construction, Repair & Alteration at Shop/Field locations for Pressure Vessels-ASME Section VIII-1; Boiler-ASME Section I Power Boilers, ASME Section IV Heating Boilers; Direct Fired Heaters-API 530 ASME B31.3 Direct Fired Heaters & ASME Section I Heating Boilers; Indirect Fired Heater Coils–ASME B31.3 Indirect Fired Heater Coils; Pressure Piping–ASME B31.3 Boiler External Piping, ASME B31.1 Power Piping, ASME B31.3 Process Piping, ASME B31.5 Refrigeration Piping, ASME B31.9 Building Services Piping; Fittings–Category A, B, C, E, F, H.ASME Accreditation for the following code designators “A”, “PP”, “S” & “U”; The National Board of Boiler & Pressure Vessel Inspectors “Certification of Authorization to Register” “NB” for the following ASME Designator(s): U, S, A, PP.The National Board of Boiler & Pressure Vessel Inspectors “Certification of Authorization” to use the “R” symbol in accordance with the provision of the national board. Provide guidance to management, supervision and field inspectors on the requirements of TES Quality Manual, Code requirements and local jurisdictional.Supporting Project staff as required, including auditing and training as required,Other duties included working with IT Managed Services Providers to ensure business needs are being met or exceeded, Microsoft Office 365 E3, standardizing software and computer setup, and email signature software implementation to standardize signatures across the entire organization. The project included web filtering, virus protection, and backs ups are meeting the needs of the company.

Fort Mcmurray, Alberta, Canada

Contracted via Thermal Energy Services Inc. to 𝗢𝗣𝗧𝗜 𝗖𝗮𝗻𝗮𝗱𝗮 / 𝗡𝗘𝗫𝗘𝗡 𝗜𝗻𝗰 owner C&SU Quality Assurance Supervisor of 50 inspectors performing initial installation inspection of piping systems, vessels and tanks and assisting troubleshooting during start-up. Transition to daily inspection supervisor/co-coordinator or 6 to 15 inspectors to ensure daily inspections are performed as required, review inspection reports and provide guidance for inspectors as required. I also worked as a member of a group to develop and write procedures for use by inspection personnel. Fill in for Nexen Chief Inspector as required during absents. Work with various groups to provide training on the requirements of NEXEN’s Equipment Integrity Management Program. Also, provide Quality Assurance function during vendor’s audits and review of sub-contractor quality programs. Review and approve contractor ITPs and review and sign off final turnover documents. Re-write Thermal Energy Services Inc Quality Control Manual and create new forms prior to ABSA renewal audit, develop WPS/PQR Numbering system and develop new WPS/PQR as required for projects. Review bid packages and provide quality requirements to management. Develop ISO manual and standard operating procedures to use by the organization.

Fort Mcmurray, Alberta, Canada

Contracted to Acuren Group Inc. as an owner C&SU Quality Assurance Representative for 𝗦𝘂𝗻𝗰𝗼𝗿 𝗘𝗻𝗲𝗿𝗴𝘆 on their Growth Integration Turnaround to review sub-contractor turnover documentation for conformance with code and client specification prior to starting up by operations after acceptance by CMT prior to acceptance by C&SU. Also was responsible for final system inspections of piping systems, vessels, structural etc... with sub-contractor and CMT for final acceptance of work prior to acceptance by C&SU.

Fort Mcmurray, Alberta, Canada

Contracted to Acuren Group Inc. as an owner Quality Assurance Representative for 𝗖𝗼𝗻𝗼𝗰𝗼𝗣𝗵𝗶𝗹𝗹𝗶𝗽𝘀 𝗖𝗮𝗻𝗮𝗱𝗮 on their 𝗦𝘂𝗿𝗺𝗼𝗻𝘁 𝗣𝗿𝗼𝗷𝗲𝗰𝘁 to revue final sub-contractor turnover documentation for conformance with code and client specification prior to start up by operations and perform field verification of installations as required on various piping systems tank and vessels.

Fort Mcmurray, Alberta

Contracted to Acuren Group Inc. as a Quality Control Inspector to work for 𝗧𝗵𝗲𝗿𝗺𝗮𝗹 𝗘𝗻𝗲𝗿𝗴𝘆 𝗦𝗲𝗿𝘃𝗶𝗰𝗲𝘀 𝗟𝘁𝗱. as their Site Quality Control Manager to complete their 𝗡𝗲𝘅𝗲𝗻/𝗢𝗽𝘁𝗶 𝗟𝗼𝗻𝗴 𝗟𝗮𝗸𝗲 𝗦𝗔𝗚𝗗 𝗣𝗿𝗼𝗷𝗲𝗰𝘁. Responsible for overseeing that all requirements of their Quality Control Manual, ASME Code and Local ABSA Regulations and client specs are adhered to.

Fort Mcmurray, Alberta, Canada

Contracted to Acuren Group Inc. as a Quality Control Piping Inspector in Fort McMurray, Alberta, to work for 𝗙𝗹𝗶𝗻𝘁 𝗜𝗻𝗳𝗿𝗮𝘀𝘁𝗿𝘂𝗰𝘁𝘂𝗿𝗲 𝗦𝗲𝗿𝘃𝗶𝗰𝗲𝘀 𝗟𝘁𝗱. to complete their 𝗡𝗲𝘅𝗲𝗻/𝗢𝗽𝘁𝗶 𝗟𝗼𝗻𝗴 𝗟𝗮𝗸𝗲 𝗨&𝗢 𝗣𝗿𝗼𝗷𝗲𝗰𝘁. Responsible for fit-up and root inspection and monitoring of closure welds, ensuring NDE is completed on the root pass before the weld is welded out, coordinating NDE after the weld is completed and completing required paperwork as required by ASBA and Flint.

Fort Mcmurray, Alberta Canada

Contracted to Jacobs Catalytic Ltd. as a Quality Control Lead Inspector in Fort McMurray, Alberta, on 𝗦𝘆𝗻𝗰𝗿𝘂𝗱𝗲 𝗖𝗮𝗻𝗮𝗱𝗮 𝗟𝘁𝗱, 𝗦𝗦𝗕 𝟮𝟬𝟬𝟲 𝗦𝗵𝘂𝘁𝗱𝗼𝘄𝗻. Responsible for the writing and implementation of ITPs, WPS etc… during pre-shutdown planning. During the shutdown, was responsible for inspection and documentation of piping systems inspections and vessel repairs during the shutdown.

Mississauga, Ontario, Canada

Contracted to Jacobs Catalytic Ltd. as a Quality Control Inspector (Mechanical, Piping, Civil, Structural and Welding) in Mississauga, Ontario for pre shutdown and shutdown for Petro Canada to work on the Chloride Mitigation Project. Included installation of pumps, piping, structural, vessels and civil.

Sudbury, Ontario, Canada

Contracted to Jacobs Catalytic Ltd. as a Quality Control Lead Inspector (Mechanical, Piping and Welding) for a shutdown in Sudbury, Ontario, for 𝗜𝗡𝗖𝗢 𝗜𝗻𝗰. 𝗮 𝘄𝗼𝗿𝗹𝗱 𝗹𝗲𝗮𝗱𝗲𝗿 𝗶𝗻 𝗡𝗶𝗰𝗸𝗲𝗹, to work on their 𝗦𝗼𝟮 𝗮𝗯𝗮𝘁𝗲𝗺𝗲𝗻𝘁 𝗽𝗿𝗼𝗷𝗲𝗰𝘁. Included duct work, vessel replacement, and piping replacement. Daily duties included weld inspection, monitoring consumables being used, maintaining up-to-date ITP, weld maps, heat number maps, receiving inspection, document review coordination of NDE and witnessing all welder testing.

Pickering, Ontario, Canada

QA/QC Inspector for Comstock Canada Ltd. (An EMCOR Company) during 𝗢𝗻𝘁𝗮𝗿𝗶𝗼 𝗣𝗼𝘄𝗲𝗿 𝗚𝗲𝗻𝗲𝗿𝗮𝘁𝗶𝗼𝗻’𝘀 𝗣𝗶𝗰𝗸𝗲𝗿𝗶𝗻𝗴 𝗡𝘂𝗰𝗹𝗲𝗮𝗿 𝗚𝗲𝗻𝗲𝗿𝗮𝘁𝗶𝗼𝗻 𝗦𝘁𝗮𝘁𝗶𝗼𝗻 𝗨𝗻𝗶𝘁# 𝟱 𝗢𝘂𝘁𝗮𝗴𝗲. Duties included assembly of work packages from Passport into comprehensive work package’s, writing Inspection & Test Plans “ITP’s”, Assigning WPS, provide guidance and co-ordinate daily inspection activities of 9 Quality Control Inspectors, Co-Ordinate NDE with Sub Contractor & Review NDE Report and Radiographic Film, Review comprehensive work packages before client review and TSSA Review, Maintain QA/QC documents as required by N285.0, B31.1/B31.3 and ISO Manuals.

Windsor, Ontario, Canada

Site QA/QC Manager for Comstock Canada Ltd. (An EMCOR Company) during construction of a 𝟱𝟴𝟬-𝗺𝗲𝗴𝗮𝘄𝗮𝘁𝘁 𝗰𝗼𝗺𝗯𝗶𝗻𝗲𝗱-𝗰𝘆𝗰𝗹𝗲, 𝗴𝗮𝘀-𝗳𝗶𝗿𝗲𝗱 𝗽𝗹𝗮𝗻𝘁 𝗳𝗼𝗿 𝗕𝗿𝗶𝗴𝗵𝘁𝗼𝗻 𝗕𝗲𝗮𝗰𝗵 𝗣𝗼𝘄𝗲𝗿 𝗣𝗿𝗼𝗷𝗲𝗰𝘁 (𝗔 𝘀𝘂𝗯𝘀𝗶𝗱𝗶𝗮𝗿𝘆 𝗼𝗳 𝗢𝗻𝘁𝗮𝗿𝗶𝗼 𝗣𝗼𝘄𝗲𝗿 𝗚𝗲𝗻𝗲𝗿𝗮𝘁𝗶𝗼𝗻). Duties included but not limited to ensuring Comstock’s policies, QA/QC program, client specification and local jurisdiction laws are adhered to, providing direction, supervision and guidance to 6 QC inspectors 3 NDE Inspectors & 3 Post Weld Heat Technicians. Also responsible for qualifying welding procedures & Welders according to ASME IX, Reviewing and approving Post Weld Heat Treatment procedures to ensure the meet code, client specification and WPS requirements, assemble and review of turnover documentation assemble and indorse piping data report as well as review Comstock’s Sub-Contractors turnover document to ensure code and client specification are being met and incorporate them into Comstock’s turnover documentation.

Hired to help Comstock Canada Ltd. (An EMCOR Company) during final turnover phase @ 𝗕𝗿𝘂𝗰𝗲 𝗣𝗼𝘄𝗲𝗿 𝗡𝘂𝗰𝗹𝗲𝗮𝗿 𝗣𝗼𝘄𝗲𝗿 𝗣𝗹𝗮𝗻𝘁 to help with final inspection and turnover documentation review for Bruce “A” Unit 3 & 4 Restart. Was then transferred to take over as Site QA/QC Manager on Comstock Canada Ltd’s, Brighton Beach Power Project (A subsidiary of Ontario Power Generation) for a 580-megawatt combined-cycle, gas-fired plant. Duties included but not limited to ensuring Comstock’s policies, QA/QC program, client specification and local jurisdiction laws are adhered to, providing direction, supervision and guidance to 6 QC inspectors 3 NDE Inspectors & 3 Post Weld Heat Technicians. Also responsible for qualifying welding procedures & Welders according to ASME IX, assemble and review turnover documentation as well as Sub-Contractor turnover document to ensure code and client specification are being adhered to.

Pickering, Ontario, Canada

Contracted to RTD Quality Services Inc. who Sub-contracted Comeau’s Inspection Services Inc to Comstock Canada Ltd. (An EMCOR Company) to work as a QC Inspector as part of their QC Team at 𝗢𝗻𝘁𝗮𝗿𝗶𝗼 𝗣𝗼𝘄𝗲𝗿 𝗚𝗲𝗻𝗲𝗿𝗮𝘁𝗶𝗼𝗻 (𝗢𝗣𝗚) during their 𝗣𝗶𝗰𝗸𝗲𝗿𝗶𝗻𝗴 𝗡𝘂𝗰𝗹𝗲𝗮𝗿 𝗚𝗲𝗻𝗲𝗿𝗮𝘁𝗶𝗼𝗻 𝗦𝘁𝗮𝘁𝗶𝗼𝗻 𝗣𝗔𝗥𝗧𝗦 𝗣𝗿𝗼𝗷𝗲𝗰𝘁 “𝗣𝗶𝗰𝗸𝗲𝗿𝗶𝗻𝗴 “𝗔” 𝗥𝗲𝘁𝘂𝗿𝗻 𝘁𝗼 𝗦𝗲𝗿𝘃𝗶𝗰𝗲, which involved the return to services of a 540 MW Nuclear reactor that was lay-up in 1997. I was hired to review turnover documentation until January, at which time I was transferred to the Field as night shift lead Inspector. Was responsible for overseeing the day-to-day activities of 5 inspectors. Assist construction with various issues such as dealing with OPG’s Service Outage Managers and plant shift managers to assure Comstock follows their N.285 C of A; B51 C of A and quality assurance manuals. Assured Inspectors are following Comstock’s procedures and standards. Also did welding inspections and assured required documentation was completed, review turnover documentation prior to TSSA, Witness and coordinate hydro testing and service testing.

Sarnia, Ontario, Canada

Hired during the final phase of construction and turnover of 𝗧𝗿𝗮𝗻𝘀𝗔𝗹𝘁𝗮, 𝟲𝟲𝟬 𝗠𝗲𝗴𝗮𝘄𝗮𝘁𝘁 𝗖𝗼𝗴𝗲𝗻𝗲𝗿𝗮𝘁𝗶𝗼𝗻 𝗽𝗹𝗮𝗻𝘁, Combined 440 MW of New construction and 220 MW of re-work to existing power plans at 𝗕𝗮𝘆𝗲𝗿 𝗮𝗻𝗱 𝗗𝗼𝘄 𝗶𝗻 𝗦𝗮𝗿𝗻𝗶𝗮, 𝗢𝗻𝘁𝗮𝗿𝗶𝗼. Jacobs QA representative on night shift, responsible for supervising sub contractors, auditing night shift to verify customer specs are being followed as well as work being done according to applicable codes and standards, review turnover documentation, sign of ITP’s as required by inspection attributes.

Alberta, Canada

Sub Contracted via RTD Quality Services Inc (now know as Applus+RTD) to 𝗕𝗮𝗯𝗰𝗼𝗰𝗸 & 𝗪𝗶𝗹𝗰𝗼𝘅 for a job @ 𝗦𝘆𝗻𝗰𝗿𝘂𝗱𝗲 𝗶𝗻 𝗙𝗼𝗿𝘁 𝗠𝗰𝗠𝘂𝗿𝗿𝗮𝘆, 𝗔𝗹𝗯𝗲𝗿𝘁𝗮 during a turnaround on C.O.Boiler # 1, Attemperator header replacement, precipitator maintenance, diverter stack valve repair, documentation, weld inspection. Also did Tank Inspection trough RTD for 𝗣𝗲𝘁𝗿𝗼 𝗖𝗮𝗻𝗮𝗱𝗮. Other work has also included API Inspections for 𝗦𝗵𝗲𝗹𝗹 𝗖𝗮𝗻𝗮𝗱𝗮 𝗟𝘁𝗱. & 𝗦𝘆𝗻𝗰𝗿𝘂𝗱𝗲 𝗖𝗮𝗻𝗮𝗱𝗮 𝗟𝘁𝗱. Doing QA/QC work in shutdown area where chloride stress corrosion cracking and a bulge in a vessel was found. QA/QC Inspection during the changing out of stainless steel affected by Chloride Stress Corrosion Cracking and prepared connection piping for the arrival of the repaired vessel.

Saint John, New Brunswick, Canada

Quality Control Inspection during 𝗡𝗲𝘄 𝗕𝗿𝘂𝗻𝘀𝘄𝗶𝗰𝗸 𝗣𝗼𝘄𝗲𝗿 𝗖𝗼𝘂𝗿𝘁𝗲𝗻𝗮𝘆 𝗕𝗮𝘆 𝗚𝗲𝗻𝗲𝗿𝗮𝘁𝗶𝗻𝗴 𝗦𝘁𝗮𝘁𝗶𝗼𝗻 𝗥𝗲𝗽𝗼𝘄𝗲𝗿 𝗣𝗿𝗼𝗷𝗲𝗰𝘁 during final phases of construction/turnover of their 270MW gas-fired power project. Was involved in all aspects of QA/QC, Documentation, Inspection, Weld Mapping, system Walk down for completion, Etc…

Saint John, New Brunswick, Canada

Sub-Contracted out to 𝗙𝗹𝘂𝗼𝗿 𝗗𝗮𝗻𝗶𝗲𝗹 𝗜𝗻𝗰. to work the owners Quality Assurance Inspector for 𝗜𝗥𝗩𝗜𝗡𝗚 𝗢𝗜𝗟 𝗟𝘁𝗱. For the “𝗞𝗜𝗡𝗚 𝗼𝗳 𝗖𝗔𝗧𝗦” $𝟭 𝗕𝗶𝗹𝗹𝗶𝗼𝗻 𝗱𝗼𝗹𝗹𝗮𝗿 𝗽𝗹𝘂𝘀 𝗿𝗲𝗳𝗶𝗻𝗲𝗿𝘆 𝘂𝗽𝗴𝗿𝗮𝗱𝗲 𝗽𝗿𝗼𝗷𝗲𝗰𝘁. Duties included witnessing of mechanical testing and hydro testing of piping systems and vessels, vessels inspections, Positive Material Identification of alloy material, reviewing turnover documentation, witnessing of welder testing, inspection of cladding and insulation, grout and paint for the owner to ensure sub-contractors are fulfilling their contract obligations.

Dartmouth, Nova Scotia, Canada

Duties included weld inspection, weld mapping, and witnessing hydro testing of boiler harps for US Power projects and large bore piping for the offshore industry to connect offshore oil platforms for the Sable Offshore Energy Project. My job also included interpreting drawings, welding symbols, dimensional checks, machine calibration, witnessing welder testing, upkeeping documentation for turnover books, scheduling of Authorized Inspectors (DOL & Lloyd’s Register) & NDT personnel as well as welder testing and maintaining ISO 9000 & ASME Documentation.Fabrication of Boiler Parts for:*Guadalupe Power Plant is a 1,088.2MW gas-fired power project located in Houston, Texas.*Panda Paris Power LP is a 1,000 MW greenfield power plant in Paris, Texas.Offshore Piping for:Sable Offshore Energy Project, Thebaud, Venture, North Triumph.

Meteghan River, Nova Scotia, Canada

A.F Theriault & Sons Ltd. – Meteghan River, NS – June 1997 to Sep 1998Welder / FabricatorEmployed as a welder/fabricator performing various activities such as fitting, metal fabrication and welding. During my employment I have been exposed to heavy equipment maintenance, ship building and repair, fabrication and erection of structural steel, welding and fabrication of piping components. This has given me experience in blueprint reading, welding (GTAW, SMAW, FCAW, GMAW, SAW,) oxy acetylene welding and cutting as well as carbon arc gouging and plasma arc cutting, During this time I have been exposed to welding and fabrication using Carbon steel, Stainless Steel, Aluminum, Cast Iron, Titanium.

Quality Management

Completion Certificate, I.C.I. Online - Intro To Coating Inspection

Completion of I.C.I. Online - Intro to Coating Inspection Modules 1 to 8 Module 1 - Role of the Inspector Module 2 - Test Instrumentation.

Welding Technology, Welding Technology

Welding, Welding

Full time study in welding Covered SMAW, GMAW, FCAW, GTAW, SAW, OFW, Blueprint Reading, Math & Metallurgy