Jul 2022 - Present
AeroLeads people directory · profile
Daniel Hanson Email & Phone Number
Director Of Hardware Engineering
at
CalAmp
1 work email found
@calamp.com
LinkedIn matched
✓ Verified Jul 2026
4 data sources
Profile completeness 100%
Current company
Role
Director Of Hardware Engineering
Location
Eden Prairie, Minnesota, United States
Company size
Who is Daniel Hanson? Overview
A concise factual answer block for searchers comparing this professional profile.
Quick answer
Daniel Hanson is listed as Director Of Hardware Engineering at CalAmp, a with 501 employees, based in Eden Prairie, Minnesota, United States. AeroLeads shows a work email signal at calamp.com and a matched LinkedIn profile for Daniel Hanson.
Daniel Hanson previously worked as Principal Electrical Engineer at Calamp and Senior Electrical Engineer at Calamp. Daniel Hanson holds Bsee, Ee from Minnesota State University, Mankato.
Company email context
Email format at CalAmp
This section adds company-level context without repeating Daniel Hanson's masked contact details.
{first_initial}{last}@calamp.com
89% confidence
AeroLeads found 1 current-domain work email signal for Daniel Hanson. Compare company email patterns before reaching out.
Profile bio
About Daniel Hanson
Electrical Design Engineer with experience in Analog and Radio Frequency (RF) circuit and product design. Including design expertise in; Embedded Systems, Power Amplifiers from VHF to 2.7GHz, Low Noise Amplifiers (LNA), Fixed & tunable filters, PLL/Synthesizers, VCO’s, discrete receiver design, Switching Power Supplies, Simulation of all above circuitry, RF Printed Circuit Board Layout, Extensive test equipment use & Working knowledge of FCC, CE, UL, and TIA compliance testing and certification.
Listed skills include Rf, Test Equipment, Analog, Antennas, and 19 others.
Current workplace
Daniel Hanson's current company
Company context helps verify the profile and gives searchers a useful next step.
Calamp
6 roles
Daniel Hanson work experience
A career timeline built from the work history available for this profile.
May 2017 - Aug 2022
Senior Electrical Engineer
Embedded design of Cellular and Satellite Routers ● Completed mixed Analog and Digital design around ARM9 32bit Microprocessor.● Integrated surface mount quad band CDMA/GSM module into single board solution with internal and external antenna options.● Utilized GPS, CAN, USB, I/O and Ethernet connectivity in an automotive qualification environment.● Preformed lead technical interface duties to external Client on a daily basis.● Developed RF and Digital schematic/layout using PADs design software.● Provided work direction to Engineering Design Specialist.
May 2012 - May 2017
Electrical Engineer Iii
Extensive work with RF transceivers, including design, analysis, testing, and integration of the discrete building blocks of transmitters and receivers.● Linear PA Design and compliance testing using Cartesian feedback loop● Digital and Analog I/Q modulator integration, tuning, and performance testing.● Developed WiMax RF card for Public Safety Radio, including discrete linear PA design● Software defined radio architecture including receive and transmit circuitry.● FIR filter design and optimization to meet radio performance specifications.● Analog and RF PCB layout design using Mentor Graphics software.● Advanced troubleshooting ● Provided work direction to Engineering Technicians● Responsible for direct communication with customers for technical questions.● Involved in new product demonstrations including presentations to outside sales.● Bill of Materials cost reduction, while maintaining current product specifications.
May 2005 - May 2012
Electrical Engineer
Worked on Public Safety and SCADA Telemetry Radio product lines.● FCC compliance testing of Public safety and base station transceivers.● VCO and PLL Design and verification on dual port modulation radio architecture.● Developed DCXO performance improvements.● Analog and RF PCB layout and design using Intergra Station CAD software.
May 2005 - May 2007
Rf Engineering Intern
Job Duties included assisting a Level III Electrical Engineer in RF Systems● Researched and Tested Potential Parts for New Designs ● Prototyped Subsystems from front-end of Receivers● Ran Computer aided design simulation of RF subsystems, LNA’s, Filters and, VCO’s● Preformed stability testing and evaluated how design changes impacted functionality
May 2004 - May 2005
Team & coworkers
Colleagues at CalAmp
Other employees you can reach at calamp.com. View company contacts for 501 employees →
JM
James Moore
Colleague at CalampUnited Kingdom
View →
EF
Eric Feminella
Colleague at CalampNew York City Metropolitan Area, United States
View →
CS
Clarence Smith
Colleague at CalampWoodbridge, Virginia, United States
View →
JK
Jikun Kim
Colleague at CalampLos Angeles Metropolitan Area, United States
View →
RP
Roger Pelletier
Colleague at CalampMont-St-Hilaire, Quebec, Canada
View →
VA
Vincent Aragon
Colleague at CalampFremont, California, United States
View →
LB
Laura Bahr
Colleague at CalampLakeville, Minnesota, United States
View →
CH
Cooper Hanson
Colleague at CalampMinneapolis, Minnesota, United States
View →
GV
Giri Venkatesan Cpa
Colleague at CalampIrvine, California, United States
View →
MA
Mark Artuso
Colleague at CalampCamarillo, California, United States
View →
James Moore
Colleague at CalampUnited Kingdom
View →
EF
Eric Feminella
Colleague at CalampNew York City Metropolitan Area, United States
View →
CS
Clarence Smith
Colleague at CalampWoodbridge, Virginia, United States
View →
JK
Jikun Kim
Colleague at CalampLos Angeles Metropolitan Area, United States
View →
RP
Roger Pelletier
Colleague at CalampMont-St-Hilaire, Quebec, Canada
View →
VA
Vincent Aragon
Colleague at CalampFremont, California, United States
View →
LB
Laura Bahr
Colleague at CalampLakeville, Minnesota, United States
View →
CH
Cooper Hanson
Colleague at CalampMinneapolis, Minnesota, United States
View →
GV
Giri Venkatesan Cpa
Colleague at CalampIrvine, California, United States
View →
MA
Mark Artuso
Colleague at CalampCamarillo, California, United States
View →
2 education records
Daniel Hanson education
Bsee, Ee
Minnesota State University, Mankato
Education record
Minnesota State University, Mankato
FAQ
Frequently asked questions about Daniel Hanson
Quick answers generated from the profile data available on this page.
What company does Daniel Hanson work for?
Daniel Hanson works for CalAmp.
What is Daniel Hanson's role at CalAmp?
Daniel Hanson is listed as Director Of Hardware Engineering at CalAmp.
What is Daniel Hanson's email address?
AeroLeads has found 1 work email signal at @calamp.com for Daniel Hanson at CalAmp.
Where is Daniel Hanson based?
Daniel Hanson is based in Eden Prairie, Minnesota, United States while working with CalAmp.
What companies has Daniel Hanson worked for?
Daniel Hanson has worked for Calamp and Dataradio.
Who are Daniel Hanson's colleagues at CalAmp?
Daniel Hanson's colleagues at CalAmp include James Moore, Eric Feminella, Clarence Smith, Jikun Kim, and Roger Pelletier.
How can I contact Daniel Hanson?
You can use AeroLeads to view verified contact signals for Daniel Hanson at CalAmp, including work email, phone, and LinkedIn data when available.
What schools did Daniel Hanson attend?
Daniel Hanson holds Bsee, Ee from Minnesota State University, Mankato.
What skills is Daniel Hanson known for?
Daniel Hanson is listed with skills including Rf, Test Equipment, Analog, Antennas, Embedded Systems, Electrical Engineering, Rf Engineering, and Pcb Design.
Find 750M verified contacts
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trial