• Construction activities like MEP Services in DC (Data center) and Data Hall, i.e., HVAC (Ducting & Chilled Water Supply & Return Piping Networking), Sanitary/plumbing (Water Supply & Drainage System), AHUs, FCUs, Chilled Water Pumps, Raised Floor CRAC (Computer Room Air Condition), Submersible Pumps, VCU (Vertical Cooling Units) Completion as per project Specifications.• VCU (Vertical Cooling Units) for BHS area, and CRAC (Computer Room Air Condition) for FM200 Rooms, ZCVs (Zone Control Valves) Completion as per project Specifications.• Verify and inspect all the NCR’s and SI’s according to the related Handing over methodology & Procedures.• Review and oversee quality procedures and ensure that company and quality requirements are being met with emphasis on accurate detailing and speedy fulfillment of compliance to standard QA/ QC requirements. • Plan, Inspection & Test Plan, and Checklist with the coordination of QA/QC Manager. Assisted in reviewing Submittals prior to submission to the Consultant for approval• Before consultant inspection, conducting internal inspections for MEP works and reporting to concern project engineers for rectification of works.• Check and verify the accuracy and Quality of Work at site for all MEP System. All should be as per the Approved Shop Drawings, Project Specification and relevant Engineering Codes/Standards.• Check and review the MEP Method of Statements, Inspection Test Plan, Project Quality Control Plan, QC Records, Pre-Commissioning and Commissioning Reports, As Built Drawings Attend all MEP Inspection Request for the Installation and Test (1st fix, 2nd fix and 3rd fix) in all building and housing facilities.Test & Commissioning Activities• Elaborate the infrastructure T&C program and procedures• Responsible for all the activities related Testing and Commissioning of AHUs (Air Handling Units), CRACs (Computer Room Air Conditions) for ICAD rooms & FCUs (Fan Coil Units).

• OLYMPIA CHEMICALS LIMITED is located in Lahore, Pakistan and is part of the Other Chemical Product and Preparation Manufacturing Industry• Plan & Monitor execution of adequate Preventing, Predictive & Corrective Maintenance to ensure uninterrupted plant operation and achieving target production.• Plan and schedule Maintenance activity (preventive and corrective activity) for all mechanical equipment (Pumps- Chemical pumps – Motorized valves – Safety relief valves and fan coolers). • Building up machinery data base for condition monitoring organizing a schedule for monitoring the rotating machines in the plants • Participate as team member of major shut team, preparing shut down activity and activity duration list , Shutdown spare parts preparation and order to ensure the availability of materials timely adhere , follow up shut down progress , cooperation with sister company and contractors to complete shutdown activity within shut down window.• Review and monitor work orders. Keep periodic update of planning and work order status in CMMS (CMMS (computerized maintenance management system) • Inspection & maintenance of Fans & break down maintenance• Regular Inspection & Preventive maintenance of Belt & Conveyors• Regular inspection of kiln support rollers, locking plate bolts• Inspection & maintenance of pollution control units such as bag filter etc.• Over all Preventive maintenance/ break down jobs of KILN and Raw Mill.• 750T/D capacity of Raw Mill (Ball Mill Type) with Girth Gear Type.

• To visit the construction site daily to check whether all works, materials, equipment, are in accordance with QA/QC program, Project drawing & specification. When defective materials, equipment, or workmanship are found, immediate action to be taken to correct them, & to report the corrective action to the Site Superintendent• Construction activities starting from checking of setting-outs & markings, interiors, finishes & fit outs etc., complying all external & internal MEP services i.e., HVAC (Ducting & Chilled Water Supply & Return Piping Networking), Sanitary/plumbing (Water Supply & Drainage System), Fire services with QA/QC inspected materials & all other service requirements for the total completion of the project by time to time co-ordination of all the associates involved• Verify and inspect all the NCR’s and SI’s according to the related Handing over methodology & Procedures.• Work through MIR’s in accordance with Contract specifications, approved Shop drawings• Control and distribution of all the company’s quality-related documentation.• Carry out multi-sites execution, approvals for inspections & supervision of all MEP trades• Submit daily, weekly & monthly QUALITY REPORTS to Manager /Consultant.• Any design issue / drafting mistakes were brought to notice gets immediately resolved with effective co-ordination.• Check shop drawings, coordination drawings and specifications of the project to insure the results indicated are being achieved well.• Perform works inspection with QA/QC, Coordinator and Consultant and preparation of Field Inspection Request (FIR) for approval.• Follow up with Engineers Supervises and check completion work and timely raise inspections and coordinate with consultant for approval• Preparation and Submittal for RFI coordination with concern engineer• Review and Inspection of all Material as per specification and raise inspections for approval prior to Installation

• Issue, keep records Site Instructions (SIs) and Non Conformance Reports (NCRs) as appropriate when there is a deviation to project specification.• Review Quality Control Plans, Construction drawing, P&ID’s, Method Statement and Procedure, ITP’s, and Vendors Specifications as per Employers agreement with the contractor that complies• With the international codes/standard practices• Responsible for inspection in the installation and alignment of mechanical equipment’s (Rotating) i.e. Centrifugal/Reciprocating pumps.• Inspection of HVAC system (chillers, air handling units, fan coil units, electrical duct heater, split system unit, cooling towers, exhaust fans, dampers, ducts and chilled water piping.• To ensure project / maintenance teams are effectively complying with Quality Management Systems and Health, Safety and Environment Systems and encourage them to provide ideas for Quality Management Systems and Health, Safety and Environment Systems improvements and liaise QA/QC and HSE Departments

• Inspection and surveillance on installation, levelness, vertically and alignment of Rotating equipments including Centrifugal / Reciprocating pumps and fans• Mechanical Inspector and monitor contractor in setting up rotating equipment and auxiliary component, Centrifugal pumps, Cryogenic systems, mass spectrometer installation with Vacuum Leak Detection system.• Supervise the contractor in maintenance, troubleshooting and modification activities related to predictive and preventive maintenance schedule in a wide range of mechanical rotating equipment i.e. DC/AC Drive motors, Centrifugal pumps and other plant auxiliary equipment’s• Maintenance worked on NOKIA plant in LTE (Fiber Optics, Plant Hasan Abdal) AERO, PAKISTAN• Responsible for any running adjustments required on equipment. Install, troubleshoot, repair, test rotating equipments such as pumps & motors.• Extracts preventive maintenance program from plant or equipment manuals and convert them to checklists and propose maintenance schedule for the implementation of the said program, for the steady and improve performance of equipment and plant machineries, such that uncontrolled breakdown will be eliminated.• Updates and keep records of all maintenance activities such as preventive and predictive maintenance, lubrication schedules, equipment history, machine breakdown, tagging and check listing of all equipment, machineries and facilities.• Carry-out highly skilled installation, maintenance and repair work on a variety of mechanical equipments like RGA (Residual Gas Analyzing), Vacuum System Connect with Vacuum Pumps, Diffuser Pumps, Cryogenic Pumps and Ion Pumps• Engaged in troubleshooting, condition monitoring, overhauling Rotary & centrifugal Pumps (single, double, EDWARD, VARIAN, EBARA, and WELCH) and reciprocating Pumps, cryogenic pumps, vertical pumps and fans