Larry Stanton
AeroLeads people directory · profile

Larry Stanton Email & Phone Number

Consultant, Independent Product Developer at LAS Enterprises
Location: San Diego County, California, United States 7 work roles 1 school
LinkedIn matched
✓ Verified July 2026 3 data sources Profile completeness 100%

Contact Signals

LinkedIn Profile matched
3 free lookups remaining · No credit card
Current company
Role
Consultant, Independent Product Developer
Location
San Diego County, California, United States
Company size

Who is Larry Stanton? Overview

A concise factual answer block for searchers comparing this professional profile.

Quick answer

Larry Stanton is listed as Consultant, Independent Product Developer at LAS Enterprises, a with 140 employees, based in San Diego County, California, United States. AeroLeads shows a matched LinkedIn profile for Larry Stanton.

Larry Stanton previously worked as Lead Engineer at Gatesair and Consultant / Founder at Las Enterprises. Larry Stanton holds Bachelor Of Science (B.S.), Applied Mechanics And Engineering Science from University Of California, San Diego.

Company email context

Email format at LAS Enterprises

This section adds company-level context without repeating Larry Stanton's masked contact details.

LAS Enterprises

Review company-level records connected to Larry Stanton before choosing the right outreach path.

Profile bio

About Larry Stanton

SENIOR PRODUCT DEVELOPMENT ENGINEER           ◇ Customer Satisfaction Through Innovation ◇Ten years plus of full-life-cycle product development (concept, proof of concept, prototype, verification, test, system integration, qualification), generating reliable, profitable, intuitive and serviceable designs. Technical leader in IPT environment encouraging collaboration. Mathematical analysis and modeling. Hands-on laboratory experience with keen troubleshooting intuition. Excellent verbal, written and computing skills.MULTIDISCIPLINARY SKILLS - Analog, digital, mixed signal, op-amps, ADC, DAC, RF- Power, AC/DC, DC/DC, LDO, power sequencing, power distribution- High Speed Communications  • SONET OC3 (155.52Mb/s) - Copper and Optical PHY, data/clock recovery, magnetics, termination  • Network - 1GIG Ethernet PHY, High Speed USB PHY  • Serial Interface – UART, SPI, I2C, RS-232, RS-422, RS-485, LVDS, LVPECL, 1-Wire- GPS, PLL, FPGA clock synth (PLL, MMCM, DLL)- Algorithms, state diagrams, block diagrams- Audio, analog/digital/mixed signal, AES/EBU, TOSLINK, TSN, mixing, routing, SRC, EQ, voice processing, amplification, microphone, headphone, speaker - DSP, biquad, IIR, FIR, dynamics- Embedded Systems - Xilinx Zynq FPGA, 9260 ARM9 SBC- FPGA hardware, some firmware design- Logic, combinatorial, FPGA, optically isolated interfaces- Mechanical packaging, structural, thermal, optics- Electromechanical, faders, transducers, DC motors, servo systems, relays, solenoids- Control Systems, feedforward, feedback, PID- Protocol documents and test procedures- PCB, schematic, placement/routing, Z control, emissions reduction, heat management- Software, Linux scripting, Batch Files, ANSI C, Visual BasicTOOLSMentor Graphics DxDesigner, Xilinx Vivado and ISE, Aldec Active-HDL, 5Spice Analysis Pro, LTSpice, Elsie, Audio Precision, APWin Basic, Microsoft Excel, Microsoft Visio, Goldeneagle HD, FTDI FT_PROG, Wireshark, Packet Player, WinSCP, XML Notepad, Audacity

Listed skills include Electronics, Embedded Systems, Product Development, Broadcast, and 44 others.

Current workplace

Larry Stanton's current company

Company context helps verify the profile and gives searchers a useful next step.

LAS Enterprises
Las Enterprises
Consultant, Independent Product Developer
California, United States
Website
Employees
140
AeroLeads page
7 roles

Larry Stanton work experience

A career timeline built from the work history available for this profile.

Consultant, Independent Product Developer

California, United States

Consultant, Independent Product Developer

Greater San Diego Area

Consulting services utilizing extensive electrical, electromechanical and mechanical product development expertise. Concurrent independent product development related to Recreational Vehicle (RV) power systems.

Lead Engineer

Greater San Diego Area

✱ GatesAir, Inc., is the ultimate successor or Harris Broadcast, Harris Corporation, Pacific Research & Engineering and Pacific Recorders & Engineering♦ FM Digital Radio Transmission Devices and Studio Products ♦Exgine⋄ Embedded digital radio generator board in the Flexiva Transmitter / Exciter⋄ Xilinx Zynq FPGA platform⋄ Utilizes OFDM modulation appended to the FM I/Q data - Completed the Project - Hardware, algorithm design and software integration/evaluation - Design, integration and verification of four programmable Exgine entities • Exgine Object Model • Embedded software • Embedded firmware • Flexiva Web GUIComprehensive radio studio audio management system - Started hardware and schematic design (Mentor Graphic DxDesigner) - Included “flying” linear fader servo system with touch sensor systemHD radio integrated Importer/Exporter - Started design of hardware and schematic • GPS synchronized clocking system • ultra-low drift MEMS DCTCXO • Ultra-stable 10MHz and 1PPS reference outputs • Multi-frequency clocking structure with Artix 7 PLL and MMCM fabric elements

Oct 2015 - Dec 2016

Consultant / Founder

Greater San Diego Area

Engineering consultant. Client Harris Broadcast / GatesAir, inc.,♦ FM digital radio transmission devices ♦Exgine (See GatesAir above) - Continued hardware and algorithm design - Managed design, integration and evaluation • Object Model • Embedded software • Firmware • Flexiva Web GUI - Coordinated efforts of the multiple programmer resources including GUI subcontractors - Validated comprehensive product function and presentation • Emphasis on customer satisfaction and intuitive user interface - Managed revision and production release of software / firmware packages - Supported service regarding product features, revisions and update procedures - Developed FFT spectrum analysis algorithm to be implemented in software - Optimized clock / synchronization structure

Jan 2014 - Oct 2015

Senior Engineer, Product Development

Harris Broadcast

Greater San Diego Area

♦ Radio broadcast consoles, routers, transmission devices and related systems ♦Exgine - Continued development, optimization and supportOrban Optimod 5500 embedded dynamics processor board - Completed development and verification of GUI software - Supported hardware and software relase to production - Supported production test

Feb 2013 - Dec 2013

Senior Engineer, Product Development

Greater San Diego Area

♦ Radio broadcast consoles, routers, transmission devices and related systems ♦Exgine (See GatesAir above) - Began hardware and algorithm design - Implemented a 100% digital PID controlled PLL • Reduced product cost and complexity • Enhanced maintainability • Increased reliability • Used MS Excel to develop, model and test PLL algorithm • Clock synchronization to high jitter (up to 100ms) HD Ethernet packets • Used single wire serially controlled high resolution MEMS oscillator (DCXO) • 300MHz clock for phase detector - Synthesized multi-frequency clocking structure with Zynq PLL and MMCM fabric elements - Designed the FM RF ingest circuitry • Input source switching • Gain control • MMIC amplification • Analog 7th order Butterworth band pass filter • Baluns and ADC interface - Translate RF to IF band • 16bit, 130MHz ADC • Utilized under-sampled Nyquist foldingCBS 880 Custom Design⋄ Multi-switch control panels⋄ 64 x 32 pixel, RGB backlit display switches⋄ Xilinx Spartan 3 FPGA⋄ USB host communication - Designed hardware - Designed FPGA firmware • Implemented coworker's USB interface state machine • SPI interface to switches/displays • ASCII to pixel character generation ▴allowed support of large and small fonts ▴Used Excel to model and optimize typeface and fontsVistaMax, Envoy, VMQuadra, VMXpress, RMX Digital, Netwave and Oasis⋄ Networked on-air consoles and routing systems - Key designer over a wide range of disciplines • Analog and digital audio • All aspects of power supply • Hardware implementation of Proprietary audio/logic links ▴64 channel ▴Bidirectional ▴155Mb/s OC3 ▴CAT5 and Fiber Optics physical interface ▴Signal equalization ▴Transmission line/terminations ▴LVPECL to LVDS signal level translation ▴Clock/data recovery ▴FPGA controlled PLL synchronization

Sep 1999 - Feb 2013

Senior Engineer, Product Development

Greater San Diego Area

♦ Radio broadcast consoles, routers, transmission devices and related systems ♦Orban Inside⋄ Optimod 5500 embedded audio dynamics processor board - Defined serial protocol for transmitter host processor RS232 communication link - Managed GUI software evaluation and release - Technical liaison between Orban, product line and internal software/firmware teamHDE-200 Exporter⋄ HD Radio audio/program data encoder - Hardware design • ARM 9 processor interface • Xilinx FPGA • USB interface • Ethernet Interface • iButton • Audio Interface • External reference clock output interface - Designed embedded GPS system • RF front end • Active antenna power supply • PLL clock synchronization from the GPS 1PPS reference • Vetted GUI and embedded software • Managed GUI and embedded software revisionsPCB layout advisor • High-speed digital • Transmission Line configuration • Analog noise and crosstalk reduction • Mixed signal • Heat management • Emissions reductionPower supply specialist for all product designs - AC/DC - Switching DC/DC - LDO

Sep 1999 - Feb 2013
Team & coworkers

Colleagues at LAS Enterprises

Other employees you can reach at gatesair.com. View company contacts for 140 employees →

1 education record

Larry Stanton education

  • University Of California, San Diego
    University Of California, San Diego
    Applied Mechanics And Engineering Science
FAQ

Frequently asked questions about Larry Stanton

Quick answers generated from the profile data available on this page.

What company does Larry Stanton work for?

Larry Stanton works for LAS Enterprises.

What is Larry Stanton's role at LAS Enterprises?

Larry Stanton is listed as Consultant, Independent Product Developer at LAS Enterprises.

Where is Larry Stanton based?

Larry Stanton is based in San Diego County, California, United States while working with LAS Enterprises.

What companies has Larry Stanton worked for?

Larry Stanton has worked for Las Enterprises, Gatesair, Harris Broadcast, Harris Corporation/Broadcast Communications Division, and Harris Corporation, Broadcast Communications Division; Section 2.

Who are Larry Stanton's colleagues at LAS Enterprises?

Larry Stanton's colleagues at LAS Enterprises include Andrew Patton, Edward Westenfeld, Juliette Duke, Michael Staff, and Alexander Kurz.

How can I contact Larry Stanton?

You can use AeroLeads to view verified contact signals for Larry Stanton at LAS Enterprises, including work email, phone, and LinkedIn data when available.

What schools did Larry Stanton attend?

Larry Stanton holds Bachelor Of Science (B.S.), Applied Mechanics And Engineering Science from University Of California, San Diego.

What skills is Larry Stanton known for?

Larry Stanton is listed with skills including Electronics, Embedded Systems, Product Development, Broadcast, Testing, Systems Engineering, Software Development, and Engineering.

Find 750M verified contacts

Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.

People with similar names

Check these profiles if this is not the Larry Stanton you were looking for.

View similar profiles