Marvin Fonseca Email & Phone Number

Key Responsibilities and Achievements:• Created and maintained harness drawings, wiring diagrams, and work instructions to fabricate, install and modify electrical and/or avionics subsystems.• Supported the shop by acting as the engineering liaison to troubleshoot documentation issues and provide real-time support on the shop floor.• Packaging electrical components as per design review meetings.• Creating wiring Layout in IP based on components schematics(logic)… Show more Key Responsibilities and Achievements:• Created and maintained harness drawings, wiring diagrams, and work instructions to fabricate, install and modify electrical and/or avionics subsystems.• Supported the shop by acting as the engineering liaison to troubleshoot documentation issues and provide real-time support on the shop floor.• Packaging electrical components as per design review meetings.• Creating wiring Layout in IP based on components schematics(logic) diagram.• Creating Logic, Integrator and Harness XC drawings in Capital/ XVE.• Developing harness design solutions within a cad environment.• Wire Packaging in 3D using NWF or XML, designating connectors.• Responsible for selection of connector, wires, terminals, connectors for electrical devices, covering type, Hardware as per requirement based on suppliers.• Provide immediate response and timely resolution to design related production issues encountered during the build process.• Creating harness drawing in CAPITAL HARNESS XC by synchronizing and Quality check through DRC to clear errors.• Checking of all seals, plugs and terminals with respect to wire gauges and devices.• Product life cycle management through Jira.• Provide documentation and make technical presentation as required.• Create and release engineering drawings and bill of materials using Engineering Change Management process.• Participate in design reviews as required – from concept phase to release.• Project Coordination with onsite design engineers and process partners.• Troubleshoot electrical and avionics ground test issues.• Develop manufacturing plans and procedures, as required.• Support hypersonic vehicle integrated testing, as required.• Contribute to the integration of complex aerospace systems. Show less

Palmdale, California, United States

-Design manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. -Preform various duties including creating/ or developing manufacturing work instructions.-Assist in investigating design/manufacturing factors such as equipment or part availability, manufacturability, ease of assembly, and large assembly management. -Develop and maintain assembly documentation.-Determine the sequence of build… Show more -Design manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. -Preform various duties including creating/ or developing manufacturing work instructions.-Assist in investigating design/manufacturing factors such as equipment or part availability, manufacturability, ease of assembly, and large assembly management. -Develop and maintain assembly documentation.-Determine the sequence of build, selecting or designing required tools, and solve production problems during the build of mechanical/ electrical piece parts and assemblies.-Troubleshoot/ correct anomalies and discrepant hardware.-Perform producibility reviews on engineering designs/ drawings to asses manufacturability, ease of assembly, and material availability.-Routinely interface with program personnel and report project status to leadership. Show less

March Air Reserve Base, California

Reservist* Conduct major and minor aircraft inspection for the KC-135/Boeing 707.* Oversaw day-to-day operations including inventory management, determined maintenance procedures and performed them by using technical publishing. * Recorded relevant data on equipment data collection forms and automated maintenance system.* Troubleshoot, diagnosed malfunctions, and recommended corrective actions. * Analyzed malfunctions, and inspected, removed, maintained, and installed… Show more Reservist* Conduct major and minor aircraft inspection for the KC-135/Boeing 707.* Oversaw day-to-day operations including inventory management, determined maintenance procedures and performed them by using technical publishing. * Recorded relevant data on equipment data collection forms and automated maintenance system.* Troubleshoot, diagnosed malfunctions, and recommended corrective actions. * Analyzed malfunctions, and inspected, removed, maintained, and installed integrated avionic systems. * Performed and supervised avionics maintenance and general aircraft servicing and handling.* Worked with the other shop’s specialties to assist them in troubleshooting their systems.* Analyzed equipment operating characteristics to isolate malfunctions in avionics systems, radar, integrated test systems built-in-test (BIT), multiplexed data bus systems, recording systems, video display systems, flight instruments, mission computer systems, inertial navigation systems (INS),global positioning system, traffic collision avoidance system, electronicwarfare (EW) systems, sensors, communication, and navigation systems,transponders, aircraft indicating systems, flight formation systems.* Removed, installed, checked, and repaired avionics systems and linereplaceable units (LRU).* Diagnosed malfunctions using technical orders, schematics, wiring diagrams, integrated test systems, and other test equipment. * Removed, replaced, and repaired faulty system wiring, electricalconnectors, antennas, transmission lines, and multiconductor cables.* Modified avionics systems according to technical publications. * Updated operational logs, inspection records, aircraft forms, and automatedmaintenance systems. * Inspected and verified the operational status and configuration of avionics systems and software. * Recorded and ensured the validity of entries into maintenance data collection and inspection systems. Show less

Palmdale, California, United States

Provide guidance to Engineering regarding design concepts to ensure the best manufacturing technique is being used to meet the Engineering design, participate in tool design reviews to ensure tools are feasible and reduce build times and program costs during assembly, define sequence of operations for product builds, investigate and initiate corrective actions and improvements that involve non-conforming product and identify improvement opportunities in areas that require reproducibility and… Show more Provide guidance to Engineering regarding design concepts to ensure the best manufacturing technique is being used to meet the Engineering design, participate in tool design reviews to ensure tools are feasible and reduce build times and program costs during assembly, define sequence of operations for product builds, investigate and initiate corrective actions and improvements that involve non-conforming product and identify improvement opportunities in areas that require reproducibility and affordability initiatives. Provide liaison support for Engineering definition to influence low production costs for integrated assembly related to aircraft structures, electrical, hydraulics, fuels, fluids and propulsion systems. Show less

Electronic Warfare Specialization• Required to support various delivery schedules and manufacturing processes, while coordinating contractual issues both cross-functionally within the company and with multiple program offices. • Engineering liaison that coordinates with PEM, IPT, and production to monitor item consumption, labor, and allocated funding. • Manufacturing support for the wiring lab on obsolete items, correct practices, process improvement, tool improvements, and… Show more Electronic Warfare Specialization• Required to support various delivery schedules and manufacturing processes, while coordinating contractual issues both cross-functionally within the company and with multiple program offices. • Engineering liaison that coordinates with PEM, IPT, and production to monitor item consumption, labor, and allocated funding. • Manufacturing support for the wiring lab on obsolete items, correct practices, process improvement, tool improvements, and QA buy-offs.• Develop improvement plans for manufacturing practices for fixed-cost programs.• Coordinate with QA to implement engineering changes (ECR), change orders (CO), and Corrective Actions (CA). • Develops, modifies, and applies evaluation (ATP) and control systems and protocols for processing materials into partially finished or finished materials product.• Integrating automated test equipment, lean practices and implementing a stockroom to increase the bottom line.• Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.• Produced electrical wiring schematics, diagrams, and harness drawings using Siemens Capital: Logic, Harness XC, and Capital Library from Electrical Source Data (ESD) such as interface control drawings and supplier specifications.• Familiarity with sizing wire IAW AS50881 Show less

Palmdale

-Fabricate, and install electrical wiring or coaxial cables on aircraft.-Electrical assembly and wire harness installation-Check, test, and troubleshoot electrical systems for conformance to specification and perform repair, removal, and reinstallation of wiring as necessary.-Cut wires to length, strip insulation from wire ends, and insulate connections with plastic sleeves.-Attach wire or complicated electrical systems to fixtures and accessories such as:… Show more -Fabricate, and install electrical wiring or coaxial cables on aircraft.-Electrical assembly and wire harness installation-Check, test, and troubleshoot electrical systems for conformance to specification and perform repair, removal, and reinstallation of wiring as necessary.-Cut wires to length, strip insulation from wire ends, and insulate connections with plastic sleeves.-Attach wire or complicated electrical systems to fixtures and accessories such as: transformers, instrument panels, and switchboards with fasteners (bolts, screws, or solder).-Monitor and verify quality in accordance with statistical process or other control procedures. Show less

Master Of Business Administration - Mba, Entrepreneurship/ Finance Studies

Bachelor Of Science - Bs, Electronics Systems Engineering Technology, 3.657

Associate Of Science (As), Aviation Electronics

Associate Of Science - As, Aviation Business Administration

Electronics Engineering Technology, Engineering

Associate Of Arts (A.A.), General

Education record