Muhammad Irawan Email & Phone Number

Batam, Riau Islands, Indonesia

1. Technological Application and Support:-Leverage specialized technologies to develop and support basic engineering and project management tasks, ensuring alignment with Tenaris Shawcor policies and standards.-Apply engineering expertise to support the planning and execution of projects, focusing on technological solutions that enhance operational efficiency.2. Basic Engineering and Project Analysis:-Collaborate within designated area to analyze the engineering requirements for new installations or modifications to existing systems.-Evaluate project needs, contributing to the development of technical specifications, calculations, and bill of materials to support effective project execution.3. Project Execution and Support:-Participate actively in assigned projects by performing calculations, creating technical specifications, and preparing detailed bills of materials.-Manage project scheduling and provide support during installation start-ups to ensure projects are completed on time and within scope.4. Compliance and Standards Adherence:-Ensure adherence to Tenaris Shawcor policies, procedures, and management standards, maintaining compliance with all relevant laws and regulations.-Monitor and enforce compliance with industry standards, contributing to a culture of safety and regulatory adherence.5. Health, Safety, and Environmental (HSE) Management:-Comply with HSE procedures by reporting incidents or observations, conducting inspections, and participating in the investigation of incidents.-Implement preventive and corrective actions to address safety concerns, and keep updated on risk analysis and environmental impact assessments.6. Asset Protection and Resource Management:-Safeguard facilities, equipment, and other physical resources from damage, theft, or misuse.-Manage resources effectively, ensuring they are utilized appropriately and maintained in optimal condition.

Batam, Riau Islands, Indonesia

1. Project Management and Procurement:-Plan, organize, and oversee procurement and construction for plant projects, ensuring effective cost control and reporting.-Assist with installation and commissioning for timely project completion.-Prepare performance and purchase specifications to guide procurement, ensuring all requirements are met.-Support procurement and expediting to acquire necessary materials and equipment promptly.2. Process Analysis and Engineering Solutions:-Capture and analyze process parameters to develop solutions that optimize plant performance and efficiency.-Use data-driven insights to address process challenges and implement improvements.3. Root Cause Analysis and Corrective Actions:-Assist in root cause analyses to resolve issues like equipment breakdowns, safety concerns, and performance parameters.-Develop and implement corrective actions based on findings to enhance operational reliability.4. Policy and Procedure Development:-Participate in developing and implementing Shawcor’s policies, including HSE standards and Quality initiatives.-Contribute to Engineering Change Proposals (ECPs) and Request for Approval (RFAs) to ensure adherence to standards and regulatory requirements.5. Health, Safety, and Environmental (HSE) Compliance:-Achieve personal HSE targets, including one housekeeping inspection per month, attending one zone meeting, and leading in safety practices.6. General Duties:-Perform other tasks as assigned by the Regional Engineering Manager, supporting various aspects of plant operations and project management.

Batam, Riau Islands, Indonesia

1. OEE Data Analysis and Optimization:-Analyze Overall Equipment Effectiveness (OEE) for automated machines (Blasting, Laser Marking, Forming, Final Inspection).-Identify inefficiencies and implement strategies to enhance machine performance and production efficiency.2. Process Monitoring and Control:-Continuously monitor and control manufacturing processes to meet quality standards and targets.-Keep detailed log books for recording process data, anomalies, and corrective actions.3. Improvement Methodologies:-Utilize PDCA and DMAIC methodologies to drive process improvements.-Lead process improvement initiatives with a focus on data-driven enhancements.4. Capital Projects and Maintenance Support:-Assist in capital project planning and execution, including new equipment installations and upgrades.-Support maintenance and troubleshooting efforts to ensure equipment reliability.5. System Reliability and Safety:-Implement strategies to improve the reliability and safety of manufacturing systems.-Develop plans to reduce costs and changeover times while ensuring workplace safety and compliance.6. Continuous Improvement and Collaboration:-Participate in continuous improvement activities to boost manufacturing efficiency.-Collaborate with engineering, planning, and quality assurance teams to resolve issues and optimize processes.7. Communication and Reporting:-Provide updates and reports to Supervisors and the Japan team on key issues and progress.-Ensure clear communication to align with organizational goals and address concerns promptly.8. Root Cause Analysis (RCA):-Conduct Root Cause Analysis (RCA) to resolve recurring issues in manufacturing processes.-Implement corrective actions based on analysis to prevent future problems.9. Compliance and Standards:-Ensure processes adhere to safety, quality, and regulatory standards.-Review and update procedures regularly to maintain compliance and support continuous improvement.

Batam, Riau Islands, Indonesia

1. Packaging Concept Development:-Design innovative packaging solutions that meet product specifications and material requirements.-Ensure packaging compatibility with manufacturing processes and logistical needs, optimizing functionality and cost-effectiveness.2. Cross-Functional Collaboration:-Collaborate with internal teams, including engineering and manufacturing, to gather comprehensive packaging requirements.-Research and evaluate packaging needs during product development to align with product features and market demands.3. Component and Label Design:-Create and design packaging components and labels adhering to product and regulatory standards.-Oversee engineering activities related to packaging, ensuring quality compliance and accurate implementation.-Document design processes, modifications, and test results thoroughly.4. Testing and Validation:-Conduct testing on packaging designs to assess performance and durability.-Analyze test results to identify improvements and adjust packaging designs as needed.5. Technical and Implementation Support:-Provide technical support during packaging design and development.-Assist manufacturing teams with integrating new packaging designs, addressing any implementation issues.6. Process Improvement:-Explore and implement improvements in packaging processes and materials to enhance protection, reduce costs, and increase sustainability.-Apply best practices and innovative solutions to optimize packaging design and efficiency.7. Documentation and Compliance:-Maintain detailed records of packaging designs, changes, and testing procedures.-Ensure adherence to industry standards and regulations, including safety and environmental requirements.

Batam, Riau Islands, Indonesia

1. Lean Management and Line Design:-Implement lean management principles to streamline production processes and reduce waste.-Design and optimize production lines for improved workflow and maximum efficiency.2. Tooling and Process Optimization:-Develop effective tooling for production to ensure high-quality output and reduced downtime.-Continuously refine manufacturing processes to enhance efficiency and effectiveness.3. System Reliability and Safety:-Maintain and enhance the reliability and safety of manufacturing systems, focusing on increasing production rates and reducing costs.-Implement strategies to minimize changeover times and ensure safe operation.4. Quality and Production Capability:-Improve process capability and production volume while maintaining high quality standards, with an emphasis on First Time Quality (FTQ).-Collaborate with Engineering, Planning, Material Control, and Quality Assurance to resolve manufacturing issues.5. Continuous Improvement and Collaboration:-Engage in continuous improvement initiatives to enhance efficiency and flexibility.-Work with internal departments to improve cycle time, capacity, and overall process performance.6. Investment and ROI Analysis:-Oversee new equipment investments and perform Return on Investment (ROI) calculations to support decisions.-Manage the implementation of new equipment to meet performance and cost goals.7. Process Analysis and Documentation:-Conduct line balancing, analyzing Takt Time, Cycle Time, Downtime, and Units Per Hour (UPH) to optimize efficiency.-Use root cause analysis methods like Fishbone Diagrams and 5 Whys to address process issues.8. Documentation and Change Management:-Develop and manage Work Instructions, Engineering Change Requests (ECR), Engineering Change Notices (ECN), Engineering Change Authority (ECA), and Failure Mode and Effects Analysis (FMEA).-Ensure documentation supports process improvements and compliance with industry standards.

Bintan Regency, Riau Islands, Indonesia

1. Product Design and Development:-Design and develop 3D models for Isolators, Incubators, and Biosafety Cabinets, including customized units and new product development.-Create and modify 2D drawings for bending, welding, and assembly processes.-Develop heating unit vaporizers (Isolators) and Incubators, incorporating customer-specific requirements and custom parts.2. Failure Analysis and Documentation:-Conduct Design Failure Mode and Effects Analysis (DFMEA) and Failure Mode Effects Criticality Analysis (FMECA) in compliance with ISO 13485, ISO 9001, and ISO 14001 standards.-Prepare work instructions for standardized units/products, including welding and assembly processes.3. Design and Process Coordination:-Generate 2D designs for cutting processes, including .DXF files, symbols, nesting, and G-code.-Assist in coordinating the assembly of Isolators, Incubators, and Biosafety Cabinets.-Develop and implement process upgrades and new systems, performing simulations and testing for effectiveness.4. Process Improvement and Compliance:-Develop best practices and innovative solutions to enhance production rates and quality.-Ensure all processes comply with safety and quality standards.-Communicate effectively with Electrical & Instrument Engineers and Project Engineers to integrate 3D designs and manage project planning.5. Documentation and Coordination:-Create and manage Bills of Materials (BOM) and BOM changes.-Prepare mock-up units for design reviews with customers to validate and refine designs.6. Collaboration and Communication:-Work closely with project teams and planners to ensure alignment on design and production objectives.-Facilitate communication between design and engineering teams to address technical and project-specific needs.

Batam, Riau Islands, Indonesia

1. Aircraft Line Maintenance:-Conduct routine and non-routine maintenance on aircraft, including inspections, repairs, and modifications.-Ensure compliance with regulatory standards and manufacturer specifications.-Diagnose and troubleshoot mechanical, electrical, and avionics issues to maintain operational safety.2.Technical Support:-Provide technical assistance to maintenance teams and other departments.-Interpret technical documentation, including maintenance manuals and service bulletins.3. Logistics Management:-Oversee procurement, storage, and distribution of aircraft parts and maintenance materials.-Ensure timely availability of parts and tools to minimize aircraft downtime.4. Compliance and Safety:-Adhere to safety protocols to maintain a safe working environment.-Ensure maintenance activities comply with aviation regulations, company policies, and industry standards.5. Quality Control:-Perform inspections and audits to ensure maintenance work meets quality standards.-Implement corrective actions to address discrepancies or issues.6. Documentation and Reporting:-Maintain accurate records of maintenance activities, including work performed and parts used.-Prepare reports on maintenance performance, incidents, and regulatory compliance.7. Team Coordination:-Coordinate with engineering, operations, and flight crews to ensure effective communication.8. Emergency Response:-Respond to aircraft on-ground (AOG) situations with immediate technical support.-Develop contingency plans for unforeseen maintenance challenges.9. Continuous Improvement:-Engage in initiatives to improve maintenance processes and efficiency.-Stay updated on industry advancements to apply best practices in line maintenance.

Batam, Riau Islands, Indonesia

1. Oil Quality and Quantity Control:-Conduct quality checks on petroleum products, including vapor analysis, density, viscosity, lubricity, flash point, fire point, and caloric value.-Measure oil quantities in tanks using the sounding method and document results to ensure compliance with standards.2. Oil Distribution Operation:-Operate and control manual oil distribution systems using valves.-Coordinate with operators for efficient oil transfer and troubleshoot issues to maintain smooth operations.3.Maintenance and Technical Support:-Inspect and maintain facilities and equipment, including electrical generators.-Oversee maintenance projects, ensuring proper scheduling and resource use.4. Health, Safety, and Environment (HSE):-Apply HSE standards and participate in safety training for docks, fuel tanks, and environmental practices.-Assist in safety audits and identify potential hazards.5. Operational Support:-Monitor system performance and assist with maintenance tasks.-Help develop and implement SOPs and contribute to process improvement projects.6. Data Management and Reporting:-Collect and record data on oil quality, distribution, and maintenance.-Prepare reports with findings and recommendations, and maintain accurate records.

Associate'S Degree, Mechanical Engineering, 3.44 / 4.00

Activities and Societies: Member of Himpunan Mahasiswa MesinMechanical Engineering (Welding)

Bachelor Of Engineering - Be, Mechanical Engineering, Current Gpa 3.44 / 4.00