Nov 2023 - Present
AeroLeads people directory · profile
Rob Van Der Drift Email & Phone Number
Value Engineer @ KMWE
at
TMC
1 work email found
@chello.nl
LinkedIn matched
✓ Verified August 2026
4 data sources
Profile completeness 100%
Current company
Role
Value Engineer @ KMWE
Location
Eindhoven, North Brabant, Netherlands
Company size
Who is Rob Van Der Drift? Overview
A concise factual answer block for searchers comparing this professional profile.
Quick answer
Rob Van Der Drift is listed as Value Engineer @ KMWE at TMC, a with 3641 employees, based in Eindhoven, North Brabant, Netherlands. AeroLeads shows a work email signal at chello.nl and a matched LinkedIn profile for Rob Van Der Drift.
Rob Van Der Drift previously worked as Process Engineer @ Bakker Magnetics Renewables at Tmc and NPI Engineer @ NTS-group at Tmc. Rob Van Der Drift holds Ing, Chemical Technology from Hts Chemical Technology, Breda.
Company email context
Email format at TMC
This section adds company-level context without repeating Rob Van Der Drift's masked contact details.
rvanderdrift@chello.nl
76% confidence
AeroLeads found 1 current-domain work email signal for Rob Van Der Drift. Compare company email patterns before reaching out.
Profile bio
About Rob Van Der Drift
TMC PORTFOLIO - Recent Projects:1. BOSCH Transmission Technology: Automotive vision in production.At Bosch the loop lines suffer from high false reject rates mainly because the darker weld area in the loop is detected as a spot.Medio 2016 the yearly average reject rate was 12%. In 2017 a weld detection method for the vision software has been introduced reducing the yearly average reject rate to an average of 5%.In 2018 after optimization of all production machines and a training course for the technicians, how to readjust the cameras after a crash, the yearly average reject rate was lower than 0.5%. With the current production level, the benefit is 500.000 euros per year.2. PHILIPS Handheld Products: (Engineer lamination)At Handheld diagnostics cartridges are made for medical applications. One of the process steps is the Lamination process. The purposes of this lamination process are to place two beads that are positioned on the laminate correctly in the chambers of the base part and secondly the laminate has to seal the base part to avoid leakage.In 2016 the production yield of the Lamination process dropped below the desired targets.After data mining of the last three production months, it was found that the main problem was caused in the bead offset in the X-direction and that this phenomenon started after a replacement of a direction controller. Data mining also showed a strong dependency of the base part position in the carrier. Therefor it was decided to investigate the manual x-offset machine parameters within a DOE. After implementation of the new parameters derived from this DOE the yield of the Lamination process returned to a normal level. With the current production level, the benefit is 225.000 euros per year.3. Black belt project Amber Pre-grind Yield ImprovementFor the pre-grind process of ceramic Amber wafers the yield of this process-step has always been a major concern. Compared with the YAG wafers the yield of Amber wafers fluctuated from batch to batch and was 10 % lower. As project leader of the black belt project Amber Yield Improvement team, we started collecting waste information over the Amber pre-grind process. One of the other major issues of waste was the slicing of wafers which occurred mainly the first run after dressing. With a DOE we found that this could be eliminated with a small increase of the dressing time.After implementation the Pre-grind Yield of Amber increased to a steady 97.5% similar to YAG production.With a production level of 12 batches a week the benefit is 175.000 euros per year.
Listed skills include Engineering, Project Management, Design Of Experiments, Troubleshooting, and 28 others.
Current workplace
Rob Van Der Drift's current company
Company context helps verify the profile and gives searchers a useful next step.
Tmc
12 roles
Rob Van Der Drift work experience
A career timeline built from the work history available for this profile.
Process Engineer @ Bakker Magnetics Renewables
Process Engineer - Project @ Bakker Magnetics Renewables, Acht.• Process Engineer - Magnet insertion & Potting.• Troubleshooting and mechanical engineering.• Implementation of new work instructions.
Jun 2022 - Nov 2022
Npi Engineer @ Nts-Group
NPI Engineer - Project @ NTS Mechatronics, Eindhoven.• TPD maintenance Phenom SEM microscopes (TFS)• NPI new product introduction (G6 system)• Troubleshooting at Final Testing• Implementation of new work instructions.
Jul 2019 - Jun 2022
Senior Proces-Technoloog @ Bosch Transmission Technology
Process Engineer - Project @ Bosch Transmission, Tilburg• Process engineer vision loop and ring inspection system. • Improve and reduce false rejects at the SQC process.• Troubleshooting daily production problems.• Data acquisition and visualisation for both vision systems.• Evaluation of new vision software versions in production.• Training of technicians and operators.• Improve and reduce false rejects at proto-runs.• MDS, FMEA and Control plans for the… Show more Process Engineer - Project @ Bosch Transmission, Tilburg• Process engineer vision loop and ring inspection system. • Improve and reduce false rejects at the SQC process.• Troubleshooting daily production problems.• Data acquisition and visualisation for both vision systems.• Evaluation of new vision software versions in production.• Training of technicians and operators.• Improve and reduce false rejects at proto-runs.• MDS, FMEA and Control plans for the allocated process steps.• Communication with sister factory in Vietnam. Show less
Sep 2017 - Jul 2019
Proces Engineer @ Philips Handheld
Process Engineer - Project @ Philips Handheld Diagnostics, Eindhoven• Process engineer, Spotting, Lamination and Bead-dosing. • Troubleshooting daily production problems.• SOP, FMEA and Control plans for the allocated process steps.• Lamination project: improve Offset X and Y direction.
Jan 2017 - Sep 2017
Process Engineer @ Philips Lumiramics
Process-engineer Project @ Philips Lumiramics, Maarheeze• Process engineer, Pressing, Binder burnout, Sintering, Screen printing, pre-grinding• Troubleshooting daily production problems.• S.O.P., F.M.E.A. and Control plans for all process steps.• Black Belt project Amber pre-grind Yield & Thin pressing project YAG.• Pressing project to eliminate product diameter problems.
Mar 2010 - Dec 2016
Senior Proces / Product Engineer
- Start inktjet printing investigation.- Upgrade pilotproduction (screenprinting, drying, pressing, cutting).- Upgrade tube kilns hardware. (new controllers)- Upgrade Halt measurementsystem.- Release batch sinter kiln.- Support Taiwan/China processes screenpinting - tumbling.- Support B.E.T., Dilatometer, DTA/GTA measurements.
Jan 2006 - May 2009
Proces / Product Engineer
- Development pilotproduction. (Array’s, X2Y)- Tumbling investigation. (Array’s 0508, 0612).- Support “Next Generation” project binder burnout & sintering
Jan 2003 - Jan 2006
Manager Factory Engineering Group
- Support processes screenprinting to sintering.- 5 factory engineers.- Data analysis of the yield.- Release bulk production.- Factory expansion (48B project)
Jul 2000 - Jan 2003
Technology Developer @ Philips Components (Mlcc)
- Implementation bulkfiring in the production.- Data logging of several processingsteps.- Lowfiring NPO project.- Production extension.- Support installation 2e sintering production kiln.- Bulkfiring research.
Jun 1996 - Jul 2000
Process Engineer @ Philips Components Magnetic Products
• Investigations on powders and pressing granulates.• Press investigations with a hydraulic “Dorst” press for the Philips factories in the Netherland, Great Britain and Germany.• Spray drying granulate investigation by means of a Niro lab. spray dry installation.
Apr 1989 - May 1996
Assistant Developer @ Philips Components Magnetic Products
• Material investigation for permanent and soft magnetic materials.• Powder / wall friction investigation.• Measurements on the press density distribution by means of Rontgen.
Aug 1986 - Mar 1989
Team & coworkers
Colleagues at TMC
Other employees you can reach at tmc-employeneurship.com. View company contacts for 3641 employees →
CM
Chery Mae Apao
Colleague at TmcPhilippines
View →
SW
Smith Wilson
Colleague at TmcUnited Kingdom
View →
YP
Yung Prince
Colleague at TmcPasadena, Texas, United States
View →
MP
Madhav Pirtani
Colleague at TmcGuwahati, Assam, India
View →
DT
Debi Trocewicz
Colleague at TmcTucson, Arizona, United States
View →
KT
Karen Tabares
Colleague at TmcPhilippines
View →
EJ
Eunice James
Colleague at TmcFort Defiance, Arizona, United States
View →
BT
Bill Thieme
Colleague at TmcDenver, Colorado, United States
View →
ZA
Zulhakim Akim
Colleague at TmcWp. Kuala Lumpur, Federal Territory Of Kuala Lumpur, Malaysia
View →
RS
Ramalingam Sankar
Colleague at TmcThanjavur, Tamil Nadu, India
View →
Chery Mae Apao
Colleague at TmcPhilippines
View →
SW
Smith Wilson
Colleague at TmcUnited Kingdom
View →
YP
Yung Prince
Colleague at TmcPasadena, Texas, United States
View →
MP
Madhav Pirtani
Colleague at TmcGuwahati, Assam, India
View →
DT
Debi Trocewicz
Colleague at TmcTucson, Arizona, United States
View →
KT
Karen Tabares
Colleague at TmcPhilippines
View →
EJ
Eunice James
Colleague at TmcFort Defiance, Arizona, United States
View →
BT
Bill Thieme
Colleague at TmcDenver, Colorado, United States
View →
ZA
Zulhakim Akim
Colleague at TmcWp. Kuala Lumpur, Federal Territory Of Kuala Lumpur, Malaysia
View →
RS
Ramalingam Sankar
Colleague at TmcThanjavur, Tamil Nadu, India
View →
1 education record
Rob Van Der Drift education
-
Hts Chemical Technology, Breda
FAQ
Frequently asked questions about Rob Van Der Drift
Quick answers generated from the profile data available on this page.
What company does Rob Van Der Drift work for?
Rob Van Der Drift works for TMC.
What is Rob Van Der Drift's role at TMC?
Rob Van Der Drift is listed as Value Engineer @ KMWE at TMC.
What is Rob Van Der Drift's email address?
AeroLeads has found 1 work email signal at @chello.nl for Rob Van Der Drift at TMC.
Where is Rob Van Der Drift based?
Rob Van Der Drift is based in Eindhoven, North Brabant, Netherlands while working with TMC.
What companies has Rob Van Der Drift worked for?
Rob Van Der Drift has worked for Tmc, Yageo Corporation, Yageo, and Philips.
Who are Rob Van Der Drift's colleagues at TMC?
Rob Van Der Drift's colleagues at TMC include Chery Mae Apao, Smith Wilson, Yung Prince, Madhav Pirtani, and Debi Trocewicz.
How can I contact Rob Van Der Drift?
You can use AeroLeads to view verified contact signals for Rob Van Der Drift at TMC, including work email, phone, and LinkedIn data when available.
What schools did Rob Van Der Drift attend?
Rob Van Der Drift holds Ing, Chemical Technology from Hts Chemical Technology, Breda.
What skills is Rob Van Der Drift known for?
Rob Van Der Drift is listed with skills including Engineering, Project Management, Design Of Experiments, Troubleshooting, R&D, Product Development, Manufacturing, and Spc.
Find 750M verified contacts
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trialPeople with similar names
Check these profiles if this is not the Rob Van Der Drift you were looking for.
View similar profiles
